检索结果-南通市图书馆

Chinese Journal of Chemical Engineering 2024年第5期69卷 34-46页

作者： jun Qiu Lu-Ri bao Wei guo Ying Yang Shu-Ying Sun National Engineering Research Center for Integrated Utilization of Salt Lake Resource East China University of Science and TechnologyShanghai 200237China

Gas-produced water is an accompanying wastewater in the natural gas extraction process,and it is a potential liquid lithium resource that contains a considerable amount of *** study investigated the feasibility of using manganese-based ion sieves to adsorb and extract lithium from gas-produced *** we focused on the applicability of two different granulation methods,extrusion and droplet,in gas-produced water *** types of H_(1.33)Mn_(1.67)O_(4) particles were prepared by the extrusion method(EHMO)and the droplet method(DHMO).The porosity of DHMO was much higher than that of EHMO,and the adsorption performance of DHMO increased with the decrease of binder *** prepared with a binder concentration of 0.14 g·ml^(-1)exhibited the best adsorption performance in gas-produced water,and the Li^(+)adsorption capacity could reach 25.14 mg·g^(-1).In gas-produced water,the adsorption equilibrium of DHMO only took 9 h,and the adsorption process conformed to the Langmuir model and pseudo-second-order kinetic *** pore diffusion model(PDM)could well describe its adsorption ***,DHMO showed a great selectivity to Li^(+),and the selectivity order of DHMO in gas-produced water was Li^(+)>Ba^(2+)>>Mg^(2+),Ca^(2+),Sr^(2+)>>Na^(+)>>K^(+).After 20 cycles,the Li^(+)adsorption capacity was still higher than 17.30 mg·g^(-1),and the rate of manganese dissolution was less than 1%.

关键词： Gas-produced water Granulation Li_(1.33)Mn_(1.67)O_(4)

Controlling solid form and crystal habit of triphenylmethanol by antisolvent crystallization in a microfluidic device

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第4期35卷 393-398页

作者： jun Lu Jinrui Yan Yaohao guo junjie Qiu Shuangliang Zhao Bo bao East China University of Science and Technology Shanghai 200237China Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology and School of Chemistry and Chemical Engineering Guangxi UniversityNanning 530004China

Crystal habit and crystal form are critical elements in determining product properties and functions. In this work, we developed a microfluidic antisolvent crystallization technique to rapidly screen and accurately control the solid form and crystal habit of triphenylmethanol(Ph_(3)COH). This advanced technique separates the primary mixing of solutions from crystal formation(nucleation and growth) by introducing the microfluidic device, avoiding clogging in microchannels to obtain high-quality crystals. The results show that we can achieve controllable preparation of pure 2Ph_(3)COH·DMSO(DMSO solvate), pure Ph_(3)COH(form β), and mixed crystals with different mass ratios. Moreover, the microscale can prompt the DMSO solvate to grow into hexagonal sheet-like and bulk crystals. We can regulate the aspect ratio of hexagonal sheet-like crystals in binary solvents and control the crystal habit of the form β to transition between long needle-like shapes and short hexagonal prisms in DMF-H_(2)O. Meanwhile, we revealed that the solvent ratio, the antisolvent flow rate, and the initial concentration of Ph_(3)COH are the main factors affecting the solid form selectivity and morphology transition. Such a novel method would be considered as a promising technique to be extended to screen and control key crystallization parameters of other substances.

关键词： Microfluidics Triphenylmethanol Antisolvent crystallization Crystal habit Solid form

Fullerenes and derivatives as electrocatalysts: Promises and challenges

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第1期9卷 7-27页

作者： Kun guo Ning Li Lipiao bao Xing Lu State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074China

Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion *** paramount signiﬁcance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active *** from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis *** instance,the well-deﬁned atomic and molecular structures,the good electron afﬁnity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modiﬁcation have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon *** increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent *** review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its *** content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deﬁciencies of these fullerene-based materials are explicitly *** conclude it by sharing our perspectives on the key aspects that future efforts shall consider.

关键词： Fullerene Fullerene derivative Metal-free catalyst Structural defect Electrocatalyst

Design and fabrication of lightweight AlCrFeNiTi_(x) compositionally complex alloys with exceptional specific strength

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3314-3328页

作者： jun-Zhi Li Wei-Zong bao Jie Chen Bo-Hua Yu Kun Zuo Tian Gao Ze-Yun Cai guo-Qiang Xie School of Materials Science and Engineering Harbin Institute of Technology(Shenzhen)Shenzhen 518055China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

This study focuses on compositionally complex alloys(CCAs),aiming to achieve a balance between high strength and low density for new energy and aerospace *** composition of AlCrFeNiTi_(x) CCAs is strategically guided by employing density functional theory and the theoretical design of thermodynamic *** CCAs,particularly AlCrFeNiTi_(0.25) alloy,demonstrate remarkable specific yield strength(1640.8 MPa) and 22.7% maximum *** incorporation of Ti facilitates the formation of lightweight and high-strength L2_(1)phase,contributing to the overall high specific *** effects of grain boundary strengthening,solid solution strengthening,Orowan strengthening and Peierls flow stress further enhance *** exploration of micros tructural changes during fracture reveals the role of ordered phases in suppressing crack propagation and absorbing energy within disordered phases,thereby improving the toughness and fracture resistance of *** methods and discoveries establish a robust foundation for advancing the development of novel lightweight CCAs.

关键词： Lightweight Compositionally complex alloys Specific yield strength

Unlocking the potential of thin-film composite reverse osmosis membrane performance:Insights from mass transfer modeling

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第5期35卷 66-76页

作者： Kexin Yuan Yulei Liu Haoran Feng Yi Liu jun Cheng Beiyang Luo Qinglian Wu Xinyu Zhang Ying Wang Xian bao Wanqian guo jun Ma State Key Laboratory of Urban Water Resource and Environment School of EnvironmentHarbin Institute of TechnologyHarbin 150090China College of Architecture and Environment Sichuan UniversityChengdu 610065China School of Municipal and Environmental Engineering Shandong Jianzhu UniversityJi’nan 250101China College of Water Conservancy and Hydropower Engineering Sichuan Agricultural UniversityYaan 625014China

Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation ***,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane *** research works have been dedicated to optimizing membrane fabrication and modification for addressing this *** the meantime,several reviews summarized these ***,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root *** this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the ***,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO ***,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane *** review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.

关键词： Reverse osmosis Mass transfer model Trade-off effect Membrane performance Optimization strategies

New process for treating boron-bearing iron ore by flash reduction coupled with magnetic separation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 473-484页

作者： Qipeng bao Lei guo Hong Yong Sohn Haibin Zuo Feng Liu Yongliang Gao Zhancheng guo State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China Department of Materials Science&Engineering University of UtahUtah 84112USA China ENFI Engineering Corporation Beijing 100038China

Boron is an important industrial raw material often sourced from minerals containing different compounds that cocrystallize,which makes it difficult to separate the mineral phases through conventional *** study proposed a new treatment called flash reduction-melting separation(FRMS)for boron-bearing iron *** this method,the concentrates were first flash-reduced at the temperature under which the particles melt,and the slag and the reduced iron phases disengaged at the particle *** reduc-tion and melting effects were achieved above 1550℃.The B_(2)O_(3) content in the separated slag was over 18wt%,and the B content in the iron was less than 0.03wt%.The proposed FRMS method was tested to investigate the effects of factors such as ore particle size and tem-perature on the reduction and melting steps with and without pre-reducing the raw *** mineral phase transformation and morphology evolution in the ore particles during FRMS were also comprehensively analyzed.

关键词： ludwigite boron-bearing iron concentrate flash reduction melting separation boron

Preface:special topic on rechargeable battery technology

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第1期67卷 1-3页

作者： Yu-guo guo Qiang Zhang jun Chen Li-jun Wan CAS Key Laboratory of Molecular Nanostructure and Nanotechnology CAS Research/Education Center for Excellence in Molecular SciencesBeijing National Laboratory for Molecular Sciences(BNLMS)Institute of ChemistryChinese Academy of Sciences(CAS)Beijing 100190China University of Chinese Academy of Sciences Beijing 100049China Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology Department of Chemical EngineeringTsinghua UniversityBeijing 100084China Frontiers Science Center for New Organic Matter Renewable Energy Conversion and Storage Center(RECAST)Haihe Laboratory of Sustainable Chemical TransformationsKey Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)College of ChemistryNankai UniversityTianjin 300071China

Rechargeable batteries play a major role in the transition from fossil energy to renewable energy and are considered the key-enabling decarbonization technology for several industries,including electronics,transportat... 详细信息

关键词： battery artificial technology

In situ anchoring in carbon matrix of Bi_(2)O_(2)CO_(3) as a high-performance anode material for Li-ion batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3634-3646页

作者： Pu-Qiang He jun guo Hui Huang Zhong-Cheng guo Faculty of Metallurgy and Energy Engineering Kunming University of Science and TechnologyKunming 650093China Research Center of Metallurgical Electrode Materials Engineering Technology Kunming 650106China Kunming Hendera Science and Technology Co. Ltd.Kunming 650106China

Bismuth-based anode materials have been regarded as promising Li-ion batteries due to their high theoretical ***,their low conductivity and associated volume expansion inhabited their *** this work,Bi_(2)O_(2)CO_(3)@C composites were successfully synthesized by in situ anchoring of flower-like Bi_(2)O_(2)CO_(3) nanosheets on a carbon-based substrate via *** unique composited structure of Bi_2O_(2)-CO_(3)@C leads to a stable specific capacity of 547 mAh·g^(-1)after 100 cycles at a current density of 0.1 A·g^(-1).Notably,it demonstrates excellent rate capability with a specific capacity of 210 mAh·g^(-1)at 5 A·g^(-1).After 550 cycles at a current density of 0.5 A·g^(-1),a high reversible capacity of nearly 400 mAh·g^(-1)was ***,in situ X-ray diffraction measurements clearly demonstrate the conversion between Bi and Li_(3)Bi during alloying/dealloying,confirming the good electrochemical reversibility of the materials for Li *** reaction kinetics of Bi_(2)O_(2)CO_(3)@C were further investigated using galvanostatic intermittent titration ***,Bi_2O_(2)-CO_(3)@C exhibited excellent long-term stability,maintaining its high reversible capacity for over 200 cycles at a current density of 0.5 A·g^(-1)in a full cell configuration using Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2) as the cathode *** result further underscores its promising potential for lithium-ion *** work may provide inspiration for the design of alloy-type negative electrode materials for high-performance rechargeable batteries.

关键词： Bi_(2)O_(2)CO_(3) Composite materials Anode materials Full batteries

Multiple exciton generation effect in photocatalytic overall water splitting

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第2期67卷 424-425页

作者： Xiaolei guo Ji-jun Zou Key Laboratory for Green Chemical Technology of Ministry of Education School of Chemical Engineering and TechnologyTianjin UniversityTianjin300072China

This highlight is based on recent research published in Nature Energy by Li and co-workers [1] from Northwestern Polytechnology University, reporting an exceeding 100% internal quantum efficiency(IQE) in photocatalytic overall water splitting. This breakthrough promises a bright future for efficient photocatalyst design by utilizing the multiple exciton effect(MEG).

关键词： splitting effect utilizing

XOR spin logic operated by unipolar current based on field-free spin-orbit torque switching induced by a lateral interface

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3868-3875页

作者： Yan-Ru Li Mei-Yin Yang guo-Qiang Yu bao-Shan Cui Jin-Biao Liu Yong-Liang Li Qi-Ming Shao jun Luo Key Laboratory of Microelectronic Devices and Integrated Technology Institute of MicroelectronicsChinese Academy of Sciences(IMECAS)Beijing 100029China University of Chinese Academy of Sciences(UCAS) Beijing 100049China Songshan Lake Materials Laboratory Dongguan 523808China Institute of Physics Chinese Academy of SciencesBeijing 100190China Key Laboratory for Magnetism and Magnetic Materials of Ministry of Education Lanzhou UniversityLanzhou 730000China Department of Electronic and Computer Engineering The Hong Kong University of Science and TechnologyHong Kong 999077China

Spin logics have emerged as a promising avenue for the development of logic-in-memory *** particular,the realization of XOR spin logic gates using a single spin-orbit torque device shows great potential for low-power stateful logic circuits in the next *** this study,we successfully obtained the XOR logic gate by utilizing a spin-orbit torque device with a lateral interface,which was created by local ion implantation in the Ta/Pt/Co/Ta Hall device exhibiting perpendicular magnetic *** angle of the lateral interface is set at 45°relative to the current direction,leading to the competition between symmetry breaking and current-driven Néel-type domain wall ***,the field-free magnetic switching reversed is realized by the same sign of current amplitude at this *** on this field-free magnetic switching behavior,we successfully proposed an XOR logic gate that could be implemented using only a single spin-orbit torque Hall *** study provides a potentially viable approach toward efficient spin logics and in-memory computing architectures.

关键词： Filed-free magnetic switching Spin-orbit torque XOR logic gate Lateral interface