检索结果-南通市图书馆

Journal of Energy Chemistry 2024年第2期89卷 1-9,I0002页

作者： bao Zhang yi Zhao Minghuang Li Qi wang Lei Cheng Lei Ming Xing Ou Xiaowei wang National Engineering Laboratory for High-Efficiency Recovery of Refractory Nonferrous Metals School of Metallurgy and EnvironmentCentral South UniversityChangsha 410083HunanChina Zhejiang Power New Energy Co. LTDZhuji 311800ZhejiangChina

Advancing high-voltage stability of layered sodium-ion oxides represents a pivotal avenue for their progress in energy storage *** this,a comprehensive understanding of the mechanisms underpinning their structural deterioration at elevated voltages remains insufficiently *** this study,we unveil a layer delamination phenomenon of Na_(0.67)Ni_(0.3)Mn_(0.7)O_(2)(NNM)within the 2.0-4.3 V voltage,attributed to considerable volumetric fluctuations along the c-axis and lattice oxygen reactions induced by the simultaneous Ni^(3+)/Ni^(4+)and anion redox *** introducing Mg doping to diminished Ni-O antibonding,the anion oxidation-reduction reactions are effectively mitigated,and the structural integrity of the P2 phase remains firmly intact,safeguarding active sites and precluding the formation of novel *** Na_(0.67)Mg_(0.05)Ni_(0.25)Mn_(0.7)O_(2)(NMNM-5)exhibits a specific capacity of100.7 mA h g^(-1),signifying an 83%improvement compared to the NNM material within the voltage of2.0-4.3 *** investigation underscores the intricate interplay between high-voltage stability and structural degradation mechanisms in layered sodium-ion oxides.

关键词： Soidum ion batteries Layer cathode materials P-type High-voltage performance Degradation analysis

New steelmaking process based on clean deoxidation technology

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1249-1262页

作者： Zhongliang wang Yanping bao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

After the converter steelmaking process,a considerable number of ferroalloys are needed to remove dissolved oxygen from the molten steel,but it also forms a lot of oxide inclusions that cannot be completely *** the same time,it increases the carbon emis-sions in the steel production *** years of research,our team have developed a series of clean deoxidation technologies,includ-ing carbon deoxidation,hydrogen deoxidation,and waste plastic deoxidation of molten steel to address the aforementioned *** this study,thermodynamic calculations and laboratory experiments were employed to verify that carbon and hydrogen can reduce the total oxygen content in the molten steel melt to below 5×10^(-6) and 10×10^(-6),*** analysis of the deoxidation mechanisms and ef-fects of polyethylene and polypropylene was also *** addition,the applications of carbon deoxidation technology in different steels with the hot-state experiment and industrial production were discussed *** carbon deoxidation experimental results of different steels were as follows:(1)the oxygen content of bearing steel was effectively controlled at 6.3×10^(-6) and the inclusion number density was lowered by 74.73%compared to aluminum deoxidized bearing steel;(2)the oxygen content in gear steel was reduced to 7.7×10^(-6) and a 54.49%reduction of inclusion number density was achieved with almost no inclusions larger than 5μm from the average level of industry gear steels;(3)a total oxygen content of M2 high-speed steel was as low as 3.7×10^(-6).In industrial production practice,car-bon deoxidation technique was applied in the final deoxidation stage for non-aluminum deoxidized bearing steel,and it yielded excellent results that the oxygen content was reduced to below 8×10^(-6) and the oxide inclusions in the steel mainly consist of silicates,along with small amounts of spinel and calcium aluminate.

关键词： clean deoxidation carbon deoxidation hydrogen deoxidation waste plastics deoxidation

Development and prospects of molten steel deoxidation in steelmaking process

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 18-32页

作者： Zhongliang wang Yanping bao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

In the long traditional process of steelmaking,excess oxygen is blown into the converter,and alloying elements are used for *** inevitably results in excessive deoxidation of products remaining within the steel liquid,affecting the cleanliness of the *** the increasing requirements for steel performance,reducing the oxygen content in the steel liquid and ensuring its high cleanliness is *** more than a hundred years of development,the total oxygen content in steel has been reduced from approximately 100×10^(-6)to approximately 10×10^(-6),and it can be controlled below 5×10^(-6)in some steel grades.A relatively stable and mature deoxidation technology has been formed,but further reducing the oxygen content in steel is no longer significant for improving steel *** research team developed a deoxidation technology for bearing steel by optimizing the entire conventional *** technology combines silicon–manganese predeoxidation,ladle furnace diffusion deoxidation,and vacuum final *** successfully conducted industrial experiments and produced interstitial-free steel with natural decarbonization ***-aluminum deoxidation was found to control the oxygen content in bearing steel to between 4×10^(-6) and 8×10^(-6),altering the type of inclusions,eliminating large particle Ds-type inclusions,improving the flowability of the steel liquid,and deriving a higher fatigue *** natural decarbonization predeoxidation of interstitial-free steel reduced aluminum consumption and production costs and significantly improved the quality of cast billets.

关键词： steel deoxidation deoxidizer metallurgical equipment bearing steel IF steel

Permanent lining castable with low bulk density and thermal conductivity:bauxite castable for tundish obtained by adding pearlescent sand

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第3期31卷 634-646页

作者： yi wang Jian Yang bao wang Hai-jun Zhang Juan Han Pei-yan Pei Wen-long Lv Jian-an Zhou The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina Wuhan Research Institute of Metallurgical Construction MCCWuhan 430081HubeiChina

The low thermal conductivity and light mass of castables for tundish permanent linings are crucial for minimizing the heat loss of molten *** consideration of the low bulk density and thermal conductivity of pearlescent sand,the thermal insulation performance of castables was attempted to be improved by adding pearlescent *** sand was modified to prevent the strength of its porous structure from *** modification mechanism of pearlescent sand and the effect of pearlescent sand on the performance of bauxite castables were *** results suggested that the addition of the modified pearlescent sand significantly raised the apparent porosity and decreased the bulk density of bauxite *** 1000℃,the bulk density of more than 60%of the modified pearlescent sand-bauxite castable was only 2.03 g/cm^(3).The mechanical properties and thermal shock resistance of the modified pearlescent sand-bauxite castable were inferior to those of conventional bauxite castable but were adequate to meet the use conditions of casta-bles for tundish permanent *** high temperatures of 200-800℃,the thermal conductivity of more than 60%of the modified pearlescent sand-bauxite castable was smaller than that of conventional bauxite *** addition of the modified pearlescent sand can greatly reduce the thermal conductivity and bulk density of bauxite castable.

关键词： Pearlescent sand-Hydrophobic modification Bauxite castable Thermal insulation performance Mechanical property

Sequential enantioselective Ugi-4CR/post-Ugi transformation strategy:a precise construction of structurally diverse azaspiro polycyclic scaffolds

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第2期67卷 576-586页

作者： Xiao-bao Wu Jun-Xiu Shi yi-Ming Ou Hua-Jie Jiang yi-Jun Fang Qi-Ming wang Quan Gao Jie Yu Department of Applied Chemistry Anhui Province Engineering Laboratory for Green Pesticide Development and ApplicationAnhui Province Key Laboratory of Crop Integrated Pest ManagementAnhui Agricultural UniversityHefei230036China

A privileged strategy has been developed for the precise construction of enantioenriched azaspiro polycyclic *** diverse azaspiro polycycles bearing multiple contiguous stereocenters are obtained with excellent results(up to 99:1 e.r.,>95:5 d.r.) via sequential enantioselective four-component Ugi reactions/post-Ugi transformations with substrates containing prerequisite functional groups in the presence of anionic stereogenic-at-cobalt(Ⅲ) complexes.

关键词： asymmetric catalysis post-Ugi transformation anionic stereogenic-at-cobalt(Ⅲ)complex azaspiro polycyclic scaffold one-pot synthesis

Cutting performance of saw blades with microtextured rougher and finisher sawteeth

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 317-334页

作者： Yang Lu Jian-Xin Deng Zhi-Hui Zhang Jia-Xing Wu Ran wang yi-Chen bao Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE School of Mechanical EngineeringShandong UniversityJinan250061People’s Republic of China

The problems of severe sawtooth wear,harsh sawing noise,and low surface quality during the processing of circular saw blades need to be *** improve the cutting performance of TiC-based cermet saw blades,microtextures parallel to the cutting edge were fabricated on rough and fine sawteeth by laser *** cutting tests were performed on a sawing platform under lubricated *** of the sawing arc length and working sawtooth cutting force variations were developed for sawing steel pipes,and the accuracy of the sawing force model was verified *** results indicate that the variations in the sawing force are proportional to the sawing arc *** circular saw blades with microtextures that did not penetrate the sawtooth rake face exhibited the lowest cutting force,sawing noise,and highest machined surface ***,the worn-out distance of the rougher and finisher sawteeth was reduced by approximately 7.4%and 44.1%,respectively,compared with conventional circular saw *** main failure modes of sawteeth were tip wear,rake face adhesion,and oxidative *** addition,the mechanism by which the textures improve the cutting and wear properties of TiC-based circular saw blades was *** study provided a significant concept for enhancing the cutting performance of circular saw blades and improving the machined surface quality.

关键词： Circular saw blades Micro textures Cutting performance Wear performance

Structural Evolution of Ultra-High Molecular Weight Polyethylene Low-Entangled Films with Reserved Shish Crystals During Hot Stretching

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第8期42卷 1227-1242页

作者： Jia-Wei Gao Li Chen Ye-Shun Zhong Chao-Wei Xing yi-Guo Li Zong-bao wang School of Materials Science and Chemical Engineering Ningbo UniversityNingbo 315211China

Shish crystals are crucial to achieving high performance low-dimensional ultra-high molecular weight polyethylene(UHMWPE)***,high stretch and shear flow fields are necessary for the formation of shish *** this study,UHMWPE gel films with reserved shish crystals were prepared by gel molding,the structural evolution and properties of UHMWPE films stretched at temperatu res of 100,110,120and 130℃were investigated by in situ small-angle X-ray scattering(SAXS)/ultra-small-angle X-ray scattering(USAXS)/wide-angle X-ray diffraction(WAXD)measu rements as well as scanning electron microscopy(SEM)and differential scanning calorimetry(DSC)*** findings showed that the reserved shish crystals can facilitate the formation and structural evolution of shish-kebab crystals during the hot ***,the reserved shish crystals promote the structu ral evolution of UHMWPE films to a greater extent when stretched at 120 and 130℃,compared to 100 and 110℃,resulting in higher crystallinity,orientation,thermal properties,breaking strength and Young's *** pared to UHMWPE high-entangled films with reserved shish crystals prepared by compression molding,UHMWPE low-entangled films with reserved shish crystals prepared by gel molding are more effective in inducing the formation and evolution of shish-kebab crystals during the hot stretching,resulting in increased breaking strength and Young's modulus.

关键词： UHMWPE low-entangled films Reserved shish crystals Structural evolution Hot stretching

Revealing interfacial charge redistribution of homologous Ru-RuS_(2) heterostructure toward robust hydrogen oxidation reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 332-339页

作者： yi Liu Lianrui Cheng Shuqing Zhou Yuting Yang Chenggong Niu Tayirjan Taylor Isimjan bao wang Xiulin Yang Guangxi Key Laboratory of Low Carbon Energy Materials School of Chemistry and Pharmaceutical SciencesGuangxi Normal UniversityGuilin 541004GuangxiChina State Key Laboratory of Biochemical Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China Saudi Arabia Basic Industries Corporation(SABIC)at King Abdullah University of Science and Technology(KAUST) Thuwal 23955-6900Saudi Arabia

Precisely tailoring the surface electronic structures of electrocatalysts for optimal hydrogen binding energy and hydroxide binding energy is vital to improve the sluggish kinetics of hydrogen oxidation reac-tion(HOR).Herein,we employ a partial desulfurization strategy to construct a homologous Ru-RuS_(2) heterostructure anchored on hollow mesoporous carbon nanospheres(Ru-RuS_(2)@C).The disparate work functions of the heterostructure contribute to the spontaneous formation of a unique built-in electric field,accelerating charge transfer and boosting conductivity of ***,Ru-RuS_(2)@C exhibits robust HOR electrocatalytic activity,achieving an exchange current density and mass activity as high as 3.56 mA cm^(-2) and 2.13 mAμg_(Ru)^(-1),*** those of state-of-the-art Pt/C and most contemporary Ru-based HOR ***,Ru-RuS_(2)@C can tolerate 1000 ppm of cO that lacks in Pt/*** analysis reveals that the directional electron transfer across Ru-RuS_(2) heterointerface induces local charge redistribution in interfacial region,which optimizes and balances the adsorption energies of H and OH species,as well as lowers the energy barrier for water formation,thereby promoting theHoR performance.

关键词： Heterostructure Hollow spherical structure Hydrogen oxidation reaction Charge redistribution Density functional calculation

Identifying the best common factor model via exploratory eactor analysis

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics(A Journal of Chinese Universities) 2024年第1期39卷 24-33页

作者： HE bao-hua TANG Rui TAGN Qi-yi School of Big Data Fuzhou University of International Studies and TradeFuzhou 350202China School of Mathematics Sun Yat-Sen UniversityGuangzhou 510275China Department of Computer Science University of BathUK Institute of Insect Science Zhejiang UniversityHangzhou 310058China.

Currently,there is no solid criterion for judging the quality of the estimators in factor *** paper presents a new evaluation method for exploratory factor analysis that pinpoints an appropriate number of factors along with the best method for factor *** proposed technique consists of two steps:testing the normality of the residuals from the fitted model via the Shapiro-Wilk test and using an empirical quantified index to judge the quality of the factor *** are presented to demonstrate how the method is implemented and to verify its effectiveness.

关键词： factor analysis Shapiro-Wilk normality residuals

Robust tantalum tuned perovskite oxygen electrode for reversible protonic ceramic electrochemical cells

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3055-3065页

作者： Yu-Shi Feng Yu Shen Fang wang Chuan Tian Qin-yi Hu Qian Duan Jing-Wei Li Di bao School of Materials Science and Engineering Changchun University of Science and Technology Zhongshan Institute of Changchun University of Science and Technology State Key Laboratory of Rare Earth Resource Utilization Changchun Institute of Applied Chemistry Chinese Academy of Sciences Key Laboratory of Preparation and Applications of Environmental Friendly Materials Ministry of EducationJilin Normal University

Perovskite oxides with diverse composition and structure have exhibited grand advances in boosting the oxygen reduction and evolution reaction（ORR/OER）,which are essential for the reversible protonic ceramic electrochemical cell（R-PCEC） toward the sustainable hydrogen production and ***,enhancement of their activity and stability remains ***,we develop the Ta-regulated BaCo0.7Fe0.3O3-δperovskite oxygen electrode(Ba(Co0.7Fe0.3)1-xTaxO3-δ)with abundant oxygen defects and achieve the simultaneous enhancement in the electrocatalytic activity and stability toward ORR and ***-fabricated R-PCEC with(Ba(Co0.7Fe0.3)0.9Ta0.1O3-δ)（BCFT10） oxygen electrode performs high power density of 1.47 W·cm-2at 650℃ in fuel cell mode,and the current density is up to-2.11 A·cm-2at 1.4 V at 650℃ in electrolysis mode,as well as the good stability in both the fuel cell and electrolysis ***,the cell also demonstrates a stable cycling operation between fuel cell and electrolysis mode,suggesting a great potential of BCFT10 as oxygen electrode material for R-PCECs.

关键词： Reversible protonic ceramic electrochemical cells Perovskite oxide Oxygen electrode Ta element doping Oxygen defects