检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第7期37卷 109-133页

作者： Jianfei WEI Silong ZHANG Jingying ZUO Xin LI Jiang QIN Wen bao School of Energy Science and Engineering Harbin Institute of TechnologyHarbin 150001China

Supersonic fuel film cooling is a promising way to simultaneously reduce the severe wall heat and friction load of the internal passage in a scramjet engine when operating at hypersonic *** eddy simulations were performed to investigate the cooling and wall friction characteristics of hydrogen and hydrocarbon films under inert and reactive *** results show that the essential difference of the turbulent state in the mixing layer contributes to the totally different behaviors of the cooling and wall friction reduction performances of the two fuel *** turbulent transport processes between the hydrogen film and the mainstream are much weaker as compared to the case of hydrocarbon film,making inert hydrogen rather superior in cooling and friction reduction ***,the increase of wall temperature for hydrogen film under the inert case is mainly driven by the loss of hydrogen with high heat capacity instead of by direct heat ***,the film cooling performance severely deteriorates when the hydrogen film burns due to presence of severe heat release sources near the *** the other hand,combustion of hydrocarbon film in the boundary layer can remarkably improve its originally barely-satisfactory cooling and friction reduction performance to the level comparable to that of hydrogen film,due to the suppression of turbulent transport processes in the mixing layer and presence of heat absorption sources near the ***,the hydrogen film is more advantageous in friction reduction,while the hydrocarbon film is more suitable for cooling.

关键词： Supersonic film cooling Hydrogen Hydrocarbon Boundary layer combustion Large eddy simulation

Alleviating the anisotropic microstructural change and boosting the lithium ions diffusion by grain orientation regulation for Ni-rich cathode materials

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 213-222,I0005页

作者： Xinyou He Shilin Su bao Zhang Zhiming Xiao Zibo Zhang Xing Ou Engineering Research Center of the Ministry of Education for Advanced Battery Materials School of Metallurgy and EnvironmentCentral South UniversityChangsha 410083HunanChina Zhejiang Power New Energy Co.Ltd Zhuji 311899ZhejiangChina

Generally,layered Ni-rich cathode materials exhibit the morphology of polycrystalline secondary sphere composed of numerous primary *** the arrangement of primary particles plays a very important role in the properties of Ni-rich *** disordered particle arrangement is harmful to the cyclic performance and structural stability,yet the fundamental understanding of disordered structure on the structural degradation behavior is ***,we have designed three kinds of LiNi_(0.83)Co_(0.06)Mn_(0.11)O_(2) cathode materials with different primary particle orientations by regulating the precursor coprecipitation *** finite element simulation and in-situ characterization,the Li^(+)transport and structure evolution behaviors of different materials are ***,the smooth Li^(+)diffusion minimizes the reaction heterogeneity,homogenizes the phase transition within grains,and mitigates the anisotropic microstructural change,thereby modulating the crack evolution ***,the optimized structure evolution ensures radial tight junctions of the primary particles,enabling enhanced Li^(+)diffusion during dynamic ***-loop bidirectional enhancement mechanism becomes critical for grain orientation regulation to stabilize the cyclic *** precursor engineering with particle orientation regulation provides the useful guidance for the structural design and feature enhancement of Ni-rich layered cathodes.

关键词： Ni-rich cathode Grain orientation regulation Anisotropic microstructural change Precursor engineering Li~+-ions diffusion

Influence and optimization of swirler parameters on elbow wear of deep coal fluidization pipeline transportation system

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第7期12卷 1408-1433页

作者： Shaodi ZHAO Jiusheng bao Shirong GE Zhongbin WANG Yan YIN Congguang HUANG School of Mechanical and Electrical Engineering China University of Mining and TechnologyXuzhou 221116China School of Mechanical Electronic and Information Engineering China University of Mining and Technology-BeijingBeijing 100083China Frontier Scientific Research Center for Fluided Mining of Deep Underground Resources China University of Mining and TechnologyXuzhou 221008China

Elbow wear is a major threat to the multiphase pipeline transportation industry,which has a negative impact on the stable operation of the transportation *** order to find the wear reduction methods of elbows in the fluidization pipeline transportation system for 2000-meter-deep coal resources,the swirler was installed upstream of the elbows,and wear simulations and tests of three kinds of elbows were carried *** results showed that the maximum wear rate(MWR)of elbows increased and then decreased along the elbow *** to the different directions of gravity,the heavy wear position(HWP)of the horizontal-vertical(H-V)elbow was in front of the vertical-horizontal(V-H)*** the downstream portion of the horizontal-horizontal(H-H)elbow was still a horizontal pipe,the HWP of the H-H elbow almost covered the whole *** swirler placed upstream of the elbows could make the particles at the elbow move to the intrados of the elbows,resulting in less collision between the particles and the extrados of the elbows,thus reducing the wear of the *** wear reduction effects of swirlers on three different elbows were favorably connected with the guide vane angle(GVA)and negatively correlated with the guide vane length(GVL),decreased first and then increased as the guide vane height(GVH)increased,and were little affected by the guide vane number(GVN)and the guide vane thickness(GVT).The mathematical models between the MWR of the elbows and guide vane parameters were *** bench tests,the wear reduction effect of three kinds of elbows under the optimal guide vane parameters was 58.4%,76.9%,and 78.6%,*** errors between the bench test results and the simulation results were around 10%.

关键词： pipe elbow erosion wear spiral flow swirler guide vane parameters particle collision

Synthesis of granulated Li_(1.33)Mn_(1.67)O_(4) via two antisolvent methods for lithium adsorption from gas-produced water

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 34-46页

作者： Jun Qiu Lu-Ri bao Wei Guo Ying Yang Shu-Ying Sun National Engineering Research Center for Integrated Utilization of Salt Lake Resource East China University of Science and TechnologyShanghai 200237China

Gas-produced water is an accompanying wastewater in the natural gas extraction process,and it is a potential liquid lithium resource that contains a considerable amount of *** study investigated the feasibility of using manganese-based ion sieves to adsorb and extract lithium from gas-produced *** we focused on the applicability of two different granulation methods,extrusion and droplet,in gas-produced water *** types of H_(1.33)Mn_(1.67)O_(4) particles were prepared by the extrusion method(EHMO)and the droplet method(DHMO).The porosity of DHMO was much higher than that of EHMO,and the adsorption performance of DHMO increased with the decrease of binder *** prepared with a binder concentration of 0.14 g·ml^(-1)exhibited the best adsorption performance in gas-produced water,and the Li^(+)adsorption capacity could reach 25.14 mg·g^(-1).In gas-produced water,the adsorption equilibrium of DHMO only took 9 h,and the adsorption process conformed to the Langmuir model and pseudo-second-order kinetic *** pore diffusion model(PDM)could well describe its adsorption ***,DHMO showed a great selectivity to Li^(+),and the selectivity order of DHMO in gas-produced water was Li^(+)>Ba^(2+)>>Mg^(2+),Ca^(2+),Sr^(2+)>>Na^(+)>>K^(+).After 20 cycles,the Li^(+)adsorption capacity was still higher than 17.30 mg·g^(-1),and the rate of manganese dissolution was less than 1%.

关键词： Gas-produced water Granulation Li_(1.33)Mn_(1.67)O_(4)

Ultra-efficient and parameter-free computation of submicron thermal transport with phonon Boltzmann transport equation

在线全文

学校读者我要写书评

暂无评论

Fundamental Research 2024年第4期4卷 907-915页

作者： Yue Hu Yongxing Shen Hua bao University of Michigan-Shanghai Jiao Tong University Joint Institute Shanghai Jiao Tong UniversityShanghai 200240China

Understanding thermal transport at the submicron scale is crucial for engineering applications,especially in the thermal management of electronics and tailoring the thermal conductivity of thermoelectric *** the submicron scale,the macroscopic heat diffusion equation is no longer valid and the phonon Boltzmann transport equation(BTE)becomes the governing equation for thermal ***,previous thermal simulations based on the phonon BTE have two main limitations:relying on empirical parameters and prohibitive computational ***,the phonon BTE is commonly used for qualitatively studying the non-Fourier thermal transport phenomena of toy *** this work,we demonstrate an ultra-efficient and parameter-free computational method of the phonon BTE to achieve quantitatively accurate thermal simulation for realistic materials and *** properly integrating the phonon properties from first-principles calculations,our method does not rely on empirical material properties *** can be generally applicable for different materials and the predicted results can match well with experimental ***,by developing a suitable ensemble of advanced numerical algorithms,our method exhibits superior numerical *** full-scale(from ballistic to diffusive)thermal simulation of a 3-dimensional fin field-effect transistor with 13 million degrees of freedom,which is prohibitive for existing phonon BTE solvers even on supercomputers,can now be completed within two hours on a single personal *** method makes it possible to achieve the predictive design of realistic nanostructures for the desired thermal *** also enables accurately resolving the temperature profiles at the transistor level,which helps in better understanding the self-heating effect of electronics.

关键词： Submicron thermal transport Boltzmann transport equation Deterministic numerical method Phonon transport Transistors Nanostructured materials

A Deep Learning Framework for Mass-Forming Chronic Pancreatitis and Pancreatic Ductal Adenocarcinoma Classification Based on Magnetic Resonance Imaging

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第4期79卷 409-427页

作者： Luda Chen Kuangzhu bao Ying Chen Jingang Hao Jianfeng He Faculty of Information Engineering and Automation Kunming University of Science and TechnologyKunming650504China Department of Radiology Second Affiliated Hospital of Kunming Medical UniversityKunming650101China School of Physics and Electronic Engineering Yuxi Normal UniversityYuxi653100China

Pancreatic diseases, including mass-forming chronic pancreatitis (MFCP) and pancreatic ductal adenocarcinoma(PDAC), present with similar imaging features, leading to diagnostic complexities. Deep Learning (DL) methodshave been shown to perform well on diagnostic tasks. Existing DL pancreatic lesion diagnosis studies basedon Magnetic Resonance Imaging (MRI) utilize the prior information to guide models to focus on the lesionregion. However, over-reliance on prior information may ignore the background information that is helpful fordiagnosis. This study verifies the diagnostic significance of the background information using a clinical ***, the Prior Difference Guidance Network (PDGNet) is proposed, merging decoupled lesion andbackground information via the Prior Normalization Fusion (PNF) strategy and the Feature Difference Guidance(FDG) module, to direct the model to concentrate on beneficial regions for diagnosis. Extensive experiments inthe clinical dataset demonstrate that the proposed method achieves promising diagnosis performance: PDGNetsbased on conventional networks record an ACC (Accuracy) and AUC (Area Under the Curve) of 87.50% and89.98%, marking improvements of 8.19% and 7.64% over the prior-free benchmark. Compared to lesion-focusedbenchmarks, the uplift is 6.14% and 6.02%. PDGNets based on advanced networks reach an ACC and AUC of89.77% and 92.80%. The study underscores the potential of harnessing background information in medical imagediagnosis, suggesting a more holistic view for future research.

关键词： Pancreatic cancer pancreatitis background region prior normalization fusion feature difference guidance

The dynamics of traveling wavefronts for a model describing host tissue degradation by bacteria

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Biomathematics 2024年第3期17卷 265-287页

作者： Xing-Xing Yang Guo-bao Zhang Ge Tian College of Mathematics and Statistics Northwest Normal University Lanzhou Gansu 730070P.R.China

In this paper,we mainly investigate the dynamics of traveling wavefronts for a model describing host tissue degradation by *** first establish the existence of spreading speed,and show that the spreading speed coincides with the minimal wave speed of traveling ***,a lower bound estimate of the spreading speed is ***,we prove that the traveling wavefronts with large speeds are globally exponentially stable,when the initial perturbation around the traveling wavefronts decays exponentially asχ→-∞,but the initial perturbation can be arbitrarily large in other *** adopted methods are the weighted energy and the squeezing technique.

关键词： Host tissue degradation bacterial infection traveling wavefronts minimal wave speed stability

Effects of main components on energy output characteristics of thermobaric explosive——A case study of typical formulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 205-216页

作者： Yunfei Zhao Yaning Li Zhiwei Han Peng bao Jingyan Wang Boliang Wang School of Chemistry&Chemical Engineering Nanjing University of Science and TechnologyNanjing210094China School of Safety Science&Engineering Nanjing University of Science and TechnologyNanjing210094China

As a kind of high-efficiency explosive with compound destructive capability, the energy output law of thermobaric explosives has been receiving great attention. In order to investigate the effects of main components on the explosive characteristics of thermobaric explosives, various high explosives and oxidants were selected to formulate five different types of thermobaric explosive. Then they were tested in both open space and closed space respectively. Pressure measurement system, high-speed camera,infrared thermal imager and multispectral temperature measurement system were used for pressure,temperature and fireball recording. The effects of different components on the explosive characteristics of thermobaric explosive were analyzed. The results showed that in open space, the overpressure is dominated by the high explosives content in the formulation. The addition of the oxidants will decrease the explosion overpressure but will increase the duration and overall brightness of the fireball. While in closed space, the quasi-static pressure formed after the explosion is positively correlated with the temperature and gas production. In addition, it was found that the differences in shell constraints can also alter the afterburning reaction of thermobaric explosives, thus affecting their energy output characteristics. PVC shell constraint obviously increases the overpressure and makes the fireball burn more violently.

关键词： Thermobaric explosives Components Overpressure Fireball Afterburning reaction

A Li_(3)P nanoparticle dispersion strengthened ultrathin Li metal electrode for high energy density rechargeable batteries

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4031-4038页

作者： Lin Fu Xiancheng Wang bao Zhang Zihe Chen Yuanjian Li Yongming Sun Provincial Guizhou Key Laboratory of Green Chemical and Clean Energy Technology School of Chemistry and Chemical EngineeringGuizhou UniversityGuiyang 550025China Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan 430074China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore 637371Singapore Institute of Materials Research and Engineering Agency for Science Technology and Research(A*STAR)Singapore 138634Singapore

Achievement of lithium(Li)metal anode with thin thickness(e.g.,≤30µm)is highly desirable for rechargeable high energy density ***,the fabrication and application of such thin Li metal foil electrode remain challenging due to the poor mechanical processibility and inferior electrochemical performance of metallic ***,mechanico-chemical synthesis of robust ultrathin Li/Li_(3)P(LLP)composite foils(~15µm)is demonstrated by employing repeated mechanical rolling/stacking operations using red P and metallic Li as raw *** in-situ formed Li+-conductive Li_(3)P nanoparticles in metallic Li matrix and their tight bonding strengthen the mechanical durability and enable the successful fabrication of free-standing ultrathin Li metal composite ***,it also reduces the electrochemical Li nucleation barrier and homogenizes Li plating/stripping *** matching to high-voltage LiCoO_(2),the full cell with a low negative/positive(N/P)capacity ratio of~1.5 offers a high energy density of~522 W·h·kg^(-1) at 0.5 C based on the mass of cathode and *** into account its facile manufacturing,potentially low cost,and good electrochemical performance,we believe that such an ultrathin composite Li metal foil design with nanoparticle-dispersion-strengthened mechanism may boost the development of high energy density Li metal batteries.

关键词： lithium metal anode high energy density battery mechanico-chemical synthesis ultrathin Li/Li_(3)P composite foil low negative/positive capacity ratio

A reputation-based blockchain scheme for sustained carbon emission reduction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第5期67卷 329-330页

作者： Lixiao ZHOU Changbing TANG Zheng bao Yang LIU Xinghuo YU College of Physics and Electronics Information Engineering Zhejiang Normal University School of Computer Science and Technology Zhejiang Normal University School of Mathematical Sciences Zhejiang Normal University School of Engineering RMIT University

Climate change is a global issue that necessitates collective responsibility from all nations. Recently, a blockchainenabled emission trading scheme(ETS) has been proposed for reducing carbon emissions to overcome the drawbacks of centralized methods [1, 2]. However, existing consensus protocols in blockchain have not been well prepared for low energy consumption and high incentive compatibility [3],which is contrary to the low carbon goal of ETS.

关键词：