检索结果-南通市图书馆

Slag design and optimization for iron capturing platinum group metals from alumina-based spent catalysts

Rare Metals 2023年第6期42卷 2093-2103页

作者： Xue-Feng He Xi-Ping Yin Yun-Ji Ding Zhi-Sheng Shi bao-huai zhao Huan-Dong Zheng Jin-Xin Jian Shen-Gen Zhang Chein-Chi Chang Research Center for Metal Materials Recycling Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing100083China Shunde Innovation Institute of University of Science and Technology Beijing Foshan528399China Institute of Engineering Technology Sinopec Catalyst Co.Ltd.Beijing101111China Department of Engineering and Technical Services District of Columbia Water and Sewer AuthorityWashington DC20032USA

Production of petrochemical catalysts accounts for one of the largest shares of platinum group metals(PGMs) consumption;thus,recycling of spent petrochemical catalysts holds great economic ***,PGMs are recovered through hydrometallurgical processes which have a low recovery efficiency and produce a large amount of *** this regard,this paper proposed a method to use iron-capturing PGMs based on CaO-Al_(2)O_(3)-Na_(2)O *** method avoided the formation of Fe-Si alloy and achieved efficient enrichment of *** droplet force model showed that the recovery efficiency of PGMs could be improved if the slag had low density and low *** on this result,FactSage software optimized the composition of ***,the effect of B_(2)O_(3) on the 1400 ℃ liquidus of CaO-Al_(2)O_(3)-Na_(2)O_(3)-B_(2)O_(3) phase diagram was ***,it was found that the recovery efficiency of PGMs exceeded 99% under the following optimized conditions:basicity of 1.0,20 wt%Na_(2)O,15 wt% B_(2)O_(3),15 wt% Fe,3 wt% C and a temperature range of 1400-1500℃.The thermodynamic model revealed the mechanism of iron *** chemical bonds prevented the formation of bonds between the alloy and slag,resulting in the separation of the slag from the *** particles and iron microspheres had significant surface Gibbs free *** when iron microspheres and PGMs particles collided and fused with each other to reduce their surface area could the Gibbs free energy of the system be reduced.

关键词： Slag type design Spent catalyst Alumina Platinum group metals(PGMs) Iron capture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enrichment of Ni-Mo-V via pyrometallurgical reduction from spent hydrogenation catalysts and the multi-reaction mechanism

引用

稀有金属:英文版 2023年第8期42卷 2700-2712页

作者： Zhi-Sheng Shi Yun-Ji Ding Xi-Ping Yin Bo Liu Han-Lin Shen Bo-Yu Wu bao-huai zhao Feng-Lan Han Christian Ekberg Shen-Gen Zhang Institute for Advanced Materials and Technology University of Science and Technology BeijingBeijing 100083China Shunde Innovation School University of Science and Technology BeijingFoshan 528399China Institute of Engineering Technology SINOPEC Catalyst Co.Ltd.Beijing 101111China School of Material Science and Engineering North Minzu UniversityYinchuan 750021China Nuclear Chemistry and Industrial Material Recycling Department of Chemistry and Chemical EngineeringChalmers University of TechnologyGothenburg 41296Sweden

Spent hydrogenation catalysts are important secondary resources due to richness in the valuable metals of Ni,Mo and *** of valuable metals from spent catalysts has high economic value and environmental benefits since they are hazardous wastes as *** recycling processes including hydrometallurgical leaching and soda roasting-leaching have disadvantages such as generating large amounts of wastewater,long process,and low recovery efficiency of valuable ***,this paper proposed synergistic enrichment of Ni,Mo and V via pyrometallurgical reduction at 1400-1500℃.The melting temperature and viscosity of slag were reduced through slag designing by software FactSage *** phase diagram of Al_(2)O_(3)-Cap-SiO_(2)-Na_(2)O-B_(2)O_(3)was drawn,and low-temperature region(≤1300℃)was selected as target slag ***,Mo,and V can be collaborative captured and recovered through the mutual solubility at molten *** the melting temperature and the amount of CaO,Na_(2)O and C were conducive to improving the metals recovery *** kilogram-scale experiments were carried out,and the recovery efficiencies of Ni,Mo and V were 98.3%,95.3%and 97.9%under optimized conditions:at 1500℃,with the basicity of 1.0,13.1 wt%SiO_(2),7.0 wt%B_(2)O_(3),7.7 wt%Na_(2)O and 20.0wt%*** distribution behavior of valuable metals was clarified by investigating the melting process of slag and the reduction in valuable *** was preferentially reduced and acted as a capturing agent,which captured other metals to form NiMoV alloys.

关键词： Spent hydrogenation catalysts(SHC) Pyrometallurgical reduction Slag design Enrichment Settlement

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Barrier Option Pricing in Regime Switching Models with Rebates

引用

Acta Mathematicae Applicatae Sinica 2024年第3期40卷 849-861页

作者： Yue-xu zhao Jia-yong bao School of Economics Hangzhou Dianzi UniversityHangzhou 310018China School of Sciences Hangzhou Dianzi UniversityHangzhou 310018China

This paper is concerned with the valuation of single and double barrier knock-out call options in a Markovian regime switching model with specific *** integral formulas of the rebates are derived via matrix Wiener-Hopf factorizations and Fourier transform techniques,also,the integral representations of the option prices are ***,the first-passage time density functions in two-state regime model are *** applications,several numerical algorithms and numerical examples are presented.

关键词： option pricing Markovian regime switching Wiener-Hopf factorization Fourier transform

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Testing Linearity in Functional Partially Linear Models

引用

Acta Mathematicae Applicatae Sinica 2024年第3期40卷 875-886页

作者： Fan-rong zhao bao-xue ZHANG School of Mathematical Sciences Shanxi UniversityTaiyuan 030006China School of Statistics Capital University of Economics and BusinessBeijing 100070China

For the functional partially linear models including flexible nonparametric part and functional linear part,the estimators of the nonlinear function and the slope function have been studied in existing *** to test the correlation between response and explanatory variables,however,still seems to be ***,a test procedure for testing the linearity in the functional partially linear models will be proposed in this paper.A test statistic is constructed based on the existing estimators of the nonlinear and the slope ***,we prove that the approximately asymptotic distribution of the proposed statistic is a chi-squared distribution under some regularity ***,some simulation studies and a real data application are presented to demonstrate the performance of the proposed test statistic.

关键词： asymptotic theory functional partially linear model Nadaraya-Watson estimate test statistic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Systematic study of the synthesis of heavy and superheavy nuclei in 48Ca-induced fusion-evaporation reactions

引用

Nuclear Science and Techniques 2024年第7期35卷 157-172页

作者： Shi-Hao Zhu Tian-Liang zhao Xiao-Jun bao Department of Physics Collaborative Innovation Center for Quantum EffectsKey Laboratory of Low Dimensional Quantum Structures and Quantum Control of Ministry of EducationHunan Normal UniversityChangsha410081China School of Nuclear Science and Technology Lanzhou UniversityLanzhou730000China School of Physics Xi’an Jiaotong UniversityXi’an710049China

We systematically studied the evaporation residue cross sections of ^(48)Ca-induced reactions on lanthanide and actinide target nuclei under the Dinuclear System(DNS)model framework to check the reliability and applicability of the *** produce new proton-rich Fl and Lv isotopes through hot fusion reactions in the superheavy element region with Z≥104,we utilized the reactions ^(48)Ca+^(236,238,239) Pu and ^(48)Ca+^(242,243,244,250) ***,owing to the detection limit of available equipment(0.1 pb),only 283Fl and 287−289Lv,which have the maximum evaporation residue cross section values of 0.149,0.130,9.522,and 0.309 pb,respectively,can be ***,to produce neutron-deficient isotopes of actinides near the proton drip line with Z=93−100,we attempted to generate the new isotopes(224−227Pu,228−232,237Cm)using the reactions ^(48)Ca+180,182,183 W and ^(48)Ca+^(184,186,187,192) *** maximum evaporation residue cross section values are 0.07,0.06,0.26,and 0.30 nb for the former set of reactions,and 1.96 pb,5.73 pb,12.16 pb,19.39 pb,54.79 pb,and 6.45 nb for the latter,*** results are expected to provide new information for the future synthesis of unknown neutron-deficient isotopes.

关键词： Dinuclear system(DNS)model Evaporation residue cross section Neutron-deficient isotopes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improvement of Microstructure and Mechanical Properties of Rapid Cooling Friction Stir-welded A1050 Pure Aluminum

引用

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 134-141页

作者：许楠 LIU Lutao SONG Qining zhao Jianhua bao Yefeng College of Materials Science and Engineering Hohai UniversityChangzhou 213200China

Two-mm thick A1050 pure aluminum plates were successfully joined by conventional and rapid cooling friction stir welding(FSW), respectively. The microstructure and mechanical properties of the welded joints were investigated by electron backscatter diffraction characterization, Vickers hardness measurements, and tensile testing. The results showed that liquid CO_(2) coolant significantly reduced the peak temperature and increased the cooling rate, so the rapidly cooled FSW joint exhibited fine grains with a large number of dislocations. The grain refinement mechanism of the FSW A1050 pure aluminum joint was primarily attributed to the combined effects of continuous dynamic recrystallization, grain subdivision, and geometric dynamic recrystallization. Compared with conventional FSW, the yield strength, ultimate tensile strength, and fracture elongation of rapidly cooled FSW joint were significantly enhanced, and the welding efficiency was increased from 80% to 93%. The enhanced mechanical properties and improved synergy of strength and ductility were obtained due to the increased dislocation density and remarkable grain refinement. The wear of the tool can produce several WC particles retained in the joint, and the contribution of second phase strengthening to the enhanced strength should not be ignored.

关键词： aluminum alloy friction stir welding recrystallization microstructure mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Spatiotemporal changes of gross primary productivity and its response to drought in the Mongolian Plateau under climate change

引用

Journal of Arid Land 2024年第1期16卷 46-70页

作者： zhao Xuqin LUO Min MENG Fanhao SA Chula bao Shanhu bao Yuhai College of Geographical Science Inner Mongolia Normal UniversityHohhot 010022China Inner Mongolia Key Laboratory of Remote Sensing and Geographic Information Systems Hohhot 010022China

Gross primary productivity(GPP)of vegetation is an important constituent of the terrestrial carbon sinks and is significantly influenced by *** the impact of droughts on different types of vegetation GPP provides insight into the spatiotemporal variation of terrestrial carbon sinks,aiding efforts to mitigate the detrimental effects of climate *** this study,we utilized the precipitation and temperature data from the Climatic Research Unit,the standardized precipitation evapotranspiration index(SPEI),the standardized precipitation index(SPI),and the simulated vegetation GPP using the eddy covariance-light use efficiency(EC-LUE)model to analyze the spatiotemporal change of GPP and its response to different drought indices in the Mongolian Plateau during *** main findings indicated that vegetation GPP decreased in 50.53% of the plateau,mainly in its northern and northeastern parts,while it increased in the remaining 49.47%***,meadow steppe(78.92%)and deciduous forest(79.46%)witnessed a significant decrease in vegetation GPP,while alpine steppe(75.08%),cropland(76.27%),and sandy vegetation(87.88%)recovered *** aridification areas accounted for 71.39% of the affected areas,while 28.53% of the areas underwent severe aridification,mainly located in the south and central ***,the warming aridification areas of desert steppe(92.68%)and sandy vegetation(90.24%)were *** warming was found to amplify the sensitivity of coniferous forest,deciduous forest,meadow steppe,and alpine steppe GPP to ***,the drought sensitivity of vegetation GPP in the Mongolian Plateau gradually decreased as altitude *** cumulative effect of drought on vegetation GPP persisted for 3.00-8.00 *** findings of this study will improve the understanding of how drought influences vegetation in arid and semi-arid areas.

关键词： gross primary productivity(GPP) climate change warming aridification areas drought sensitivity cumulative effect duration(CED) Mongolian Plateau

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical properties and thermal deformation behavior of low-cost titanium matrix composites prepared by a structure-optimized Y_(2)O_(3) crucible

引用

Journal of Iron and Steel Research International 2024年第3期31卷 738-751页

作者： Qian Dang Gang Huang Ye Wang Chi Zhang Guo-huai Liu zhao-dong Wang The State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang 110819LiaoningChina School of Materials Science and Chemical Engineering Harbin University of Science and TechnologyHarbin 150004HeilongjiangChina School of Materials Science and Engineering Shenyang University of TechnologyShenyang 110870LiaoningChina

A porous yttrium oxide crucible with both thermal shock resistance and erosion resistance was developed by structural *** structure-optimized yttrium oxide crucible was proved to be suitable for melting highly reactive titanium ***-cost(TiB+Y2O_(3))-reinforced titanium matrix composites were prepared by vacuum induction melting using the prepared *** thermal deformation behavior and microstructure evolution of(TiB+Y2O_(3))-reinforced tita-nium matrix composites were investigated at deformation temperatures of 900-1100℃with strain rates of 0.001-1 *** results showed that the prepared yttrium oxide crucible had both thermal shock and erosion resistance,the low-cost titanium matrix composites could be prepared by the developed yttrium oxide crucibles which were homogeneous in composition and highly sensitive to strain rate and deformation temperature,and the peak and theological stresses decreased with increasing deformation temperature or decreasing strain *** addition,the average thermal deformation activation energy of the composites was calculated to be 574.6 kJ/mol by establishing the Arrhenius constitutive equation in consideration of the strain variables,and the fitting goodness between the predicted stress value and the measured value was 97.624%.The calculated analysis of the hot processing map showed that the best stable thermal deformation zone was located in the deformation temperature range of 1000-1100℃and strain rate range of 0.001-0.01 s^(-1),where the peak dissipation coefficient wasη=71%.In this zone,the deformation of the reinforcement and matrix was harmonious,the reinforcement was less likely to fracture,dynamic recrystallization occurred more fully and the alloy exhibited near steady rheological characteristics.

关键词： Yttrium oxide crucible Titanium matrix composite Thermal deformation behavior Constitutive equation Hot processing map Microstructure evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A unified intelligent control strategy synthesizing multi-constrained guidance and avoidance penetration

引用

Science China(Information Sciences) 2024年第7期67卷 329-330页

作者： Sibo zhao Jianwen ZHU Weimin bao Xiaoping LI School of Aerospace Science and Technology Xidian University College of Missile Engineering Rocket Force University of Engineering China Aerospace Science and Technology Corporation

Satisfying various terminal constraints and achieving evasive flight in no-flying-zones (NFZs) are two important flight missions undertaken by high velocity vehicles. We studied an intelligent maneuvering guidance strategy using deep reinforcement learning (DRL) methods to achieve the coordination and unification of evasive flight and multi-constrained guidance with minimal energy loss.

关键词： Energy dissipation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Influence and optimization of swirler parameters on elbow wear of deep coal fluidization pipeline transportation system

引用

Friction 2024年第7期12卷 1408-1433页

作者： Shaodi zhao Jiusheng bao Shirong GE Zhongbin WANG Yan YIN Congguang HUANG School of Mechanical and Electrical Engineering China University of Mining and TechnologyXuzhou 221116China School of Mechanical Electronic and Information Engineering China University of Mining and Technology-BeijingBeijing 100083China Frontier Scientific Research Center for Fluided Mining of Deep Underground Resources China University of Mining and TechnologyXuzhou 221008China

Elbow wear is a major threat to the multiphase pipeline transportation industry,which has a negative impact on the stable operation of the transportation *** order to find the wear reduction methods of elbows in the fluidization pipeline transportation system for 2000-meter-deep coal resources,the swirler was installed upstream of the elbows,and wear simulations and tests of three kinds of elbows were carried *** results showed that the maximum wear rate(MWR)of elbows increased and then decreased along the elbow *** to the different directions of gravity,the heavy wear position(HWP)of the horizontal-vertical(H-V)elbow was in front of the vertical-horizontal(V-H)*** the downstream portion of the horizontal-horizontal(H-H)elbow was still a horizontal pipe,the HWP of the H-H elbow almost covered the whole *** swirler placed upstream of the elbows could make the particles at the elbow move to the intrados of the elbows,resulting in less collision between the particles and the extrados of the elbows,thus reducing the wear of the *** wear reduction effects of swirlers on three different elbows were favorably connected with the guide vane angle(GVA)and negatively correlated with the guide vane length(GVL),decreased first and then increased as the guide vane height(GVH)increased,and were little affected by the guide vane number(GVN)and the guide vane thickness(GVT).The mathematical models between the MWR of the elbows and guide vane parameters were *** bench tests,the wear reduction effect of three kinds of elbows under the optimal guide vane parameters was 58.4%,76.9%,and 78.6%,*** errors between the bench test results and the simulation results were around 10%.

关键词： pipe elbow erosion wear spiral flow swirler guide vane parameters particle collision

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：