检索结果-南通市图书馆

维普期刊数据库

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.b.Zhang S.J.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).by detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

Evaluation of Industrial IoT Service Providers with TOPSIS based on Circular Intuitionistic Fuzzy Sets

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第7期80卷 715-746页

作者： Elif Çalo˘glu büyükselçuk Industrial Engineering Department Fenerbahçe University˙Istanbul34758Turkey

Industrial Internet of Things(IIoT)service providers have become increasingly important in the manufacturing industry due to their ability to gather and process vast amounts of data from connected devices,enabling manufacturers to improve operational efficiency,reduce costs,and enhance product *** platforms provide manufacturers with real-time visibility into their production processes and supply chains,allowing them to optimize operations and make informed *** addition,IIoT service providers can help manufacturers create new revenue streams through the development of innovative products and services and enable them to leverage the benefits of emerging technologies such as Artificial Intelligence(AI)and machine ***,the implementation of IIoT platforms in the manufacturing industry is crucial for companies seeking to remain competitive and meet the ever-increasing demands of customers in the digital *** this study,the evaluation criteria to be considered in the selection of IIoT service provider in small andmedium-sized(SME)manufacturing enterprises will be determined and IIoT service providers alternatives will be evaluated using the technique for order preference by similarity to an ideal solution(TOPSIS)method based on circular intuitionistic fuzzy *** on the assessments conducted in accordance with the literature review and expert consultations,a set of 8 selection criteria has been *** criteria encompass industry expertise,customer support,flexibility and scalability,security,cost-effectiveness,reliability,data analytics,as well as compatibility and *** evaluating these criteria,it was observed that the security criterion holds the highest significance,succeeded by cost-effectiveness,data analytics,flexibility and scalability,reliability,and customer support criteria,in descending order of *** the evaluation of seven distinct alternatives against these criteria,it was deduced tha

关键词： IIoT manufacturing TOPSIS circular intuitionistic fuzzy sets

运用临床信息和术前CT表现预测壶腹部腺癌的肿瘤复发及生存率

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

国际医学放射学杂志 2021年第3期44卷 372-372页

作者： H.yoen J.H.Kim b.y.hur S.J.Ahn S.K.Jeon S.y.Choi 彭鹏

摘要目的运用临床信息及术前CT表现预测壶腹部腺癌的肿瘤复发及生存率。方法回顾性分析216例接受过术前CT检查和手术治疗的壶腹部腺癌病人。由2位放射科医

关键词：

Effect of Al_(2)O_(3)on the Mechanical Properties of(b_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai b.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang b.L.Xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

b_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of b_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(b_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional b_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (b_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

钆塞酸二钠增强MRI评估增生性肝细胞癌手术预后

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

国际医学放射学杂志 2021年第6期 729-729页

作者： H.J.Kang H.Kim D.H.Lee b.y.hur y.J.Hwang K.S.Suh 陈晨朱冬勇

肝细胞癌(HCC)是一种异质性肿瘤,其预后因亚型而异。HCC分为增生性和非增生性两大类。目的评价增生性HCC的Gd增强MRI表现及对手术预后的意义。材料与

关键词：

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： y.Fu G.G.Wang A.Hu y.Li K.b.Thacker J.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(Sy)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

维普期刊数据库

Finite element analysis and experimental validation of polymer-metal contacts in block-on-ring configuration

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 554-568页

作者： K.y.Eayal AWWAD Khosro FALLAHNEZHAD b.F.yOUSIF Ahmad MOSTAFA Omar ALAJARMEH A.SHALWAN Xuesen ZENG Mechanical Engineering Department Faculty of EngineeringTafila Technical UniversityTafila 66110Jordan Medical Device Research Institute College of Science and EngineeringFlinders UniversitySouth Australia 5042Australia Centre for Future Materials University of Southern QueenslandToowoomba 4350Australia Department of Manufacturing Engineering Technology Public Authority for Applied Education and TrainingKuwait 13092Kuwait

The wear profile analysis,obtained by different tribometers,is essential to characterise the wear ***,most of the available methods did not take the stress distribution over the wear profile in consideration,which causes inaccurate *** this study,the wear profile of polymer–metal contact,obtained by block-on-ring configuration under dry sliding conditions,was analysed using finite element modelling(FEM)and experimental ***’s wear equation was integrated into a developed FORTRAN-UMESHMOTION code linked with Abaqus software.A varying wear coefficient(k)values covering both running-in and steady state regions,and a range of applied loads involving both mild and severe wear regions were measured and implemented in the *** FEM was in good agreement with the *** model reproduced the stress distribution profiles under variable testing conditions,while their values were affected by the sliding direction and maximum wear depth(hmax).The largest area of the wear profile,exposed to the average contact stresses,is defined as the normal *** the critical zones were characterized by high stress concentrations reaching up to 10 times of that at the normal *** wear profile was mapped to identify the critical zone where the stress concentration is the key point in this *** surface features were examined in different regions using scanning electron microscope(SEM).Ultimately,SEM analysis showed severer damage features in the critical zone than that in the normal zone as proven by ***,the literature data presented and considered the wear features the same at any point of the wear *** this study,the normal zone was determined at a stress value of about 0.5 MPa,whereas the critical zone was at about 5.5 *** wear behaviour of these two zones showed totally different features from one another.

关键词： polymer-to-metal contact block-on-ring wear profile wear model