检索结果-南通市图书馆

Pedosphere 2011年第5期21卷 621-627页

作者： b.y.chung C.H.SONG b.J.PARK J.y.CHO Advanced Radiation Technology Institute Korea Atomic Energy Research Institute(KAERI) Korea Testing & Research Institute(KTR) Department of Horticultural Science Chungbuk National University Department of bio-environmental Chemistry Chonbuk National University

A pot experiment was conducted in a plastic film house to evaluate the translocation and uptake of heavy metals(Pb,Cd,Cu,and Zn) into brown rice(Oryza sativa L.) and the heavy metals residues in soils which had previously been irrigated with domestic wastewater for a long time(3 years).The range of Pb,Cd,Cu,and Zn was 5.10 ± 0.01,0.105 ± 0.017,5.76 ± 0.42,and 23.56 ± 1.40 mg kg-1,respectively in the domestic wastewater-irrigated soil,and 0.370 ± 0.006,0.011 ± 0.001,0.340 ± 0.04,and 2.05 ± 0.18 mg kg-1,respectively,in the domestic wastewater-irrigated brown *** results indicated that application of domestic wastewater to arable land slightly increased the levels of Pb,Cd,Cu,and Zn in soil and brown rice(P y metals in brown rice were lower than the recommended tolerable levels proposed by the Joint FAO/WHO Expert Committee on Food ***,the continuous monitoring and pollution control of hazardous materials from domestic wastewater are needed in order to prevent excessive build-up of heavy metals in the food chain.

关键词： accumulation domestic wastewater ground water irrigation P2O5 total N

Hierarchical Control Strategy for Load Regulation based on Stackelberg Game Theory Considering Randomness

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 929-941页

作者： Tingyu Jiang Ping Ju C.y.chung yuzhong Gong College of Energy and Electrical Engineering Hohai UniversityNanjing 211100China Department of Electrical Engineering City University of Hong KongHong Kong CF624China Department of Electrical and Computer Engineering University of SaskatchewanSaskatoonSK S7N 5A9Canada CSEE IEEE

Demand response has been recognized as a valuable functionality of power systems for mitigating power *** paper proposes a hierarchical control strategy among the distribution system operator(DSO),load aggregators(LAs),and thermostatically controlled loads(TCLs);the strategy includes a scheduling layer and an executive layer to provide load *** the scheduling layer,the DSO(leader)offers compensation price(CP)strategies,and the LAs(followers)respond to CP strategies with available regulation power(ARP)*** of the DSO and LAs are modeled according to their behaviors during the load regulation *** game is adopted to capture interactions among the players and leader and to obtain the optimal strategy for each participant to achieve ***,considering inevitable random factors in practice,e.g.,renewable generation and behavior of users,two different stochastic models based on sample average approximation(SAA)and parameter modification are formulated with improved scheduling *** the executive layer,distributed TCLs are triggered based on strategies determined in the scheduling layer.A self-triggering method that does not violate user privacy is presented,where TCLs receive external signals from the LA and independently determine whether to alter their operation *** simulations are performed on the modified IEEE-24 bus system to verify effectiveness of the proposed strategy.

关键词： Demand response hierarchical control load regulation self-triggering method Stackelberg game

Data-driven Static Equivalence with Physics-informed Koopman Operators

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第1期10卷 432-438页

作者： Wei Lin Changhong Zhao Maosheng Gao C.y.chung Department of Electrical Engineering The Hong Kong Polytechnic UniversityHong Kong SARChina Department of Information Engineering The Chinese University of Hong KongHong Kong SARChina School of Electrical Engineering Chongqing UniversityChongqing 400044China

With deployment of measurement units,fitting static equivalent models of distribution networks(DNs)by linear regression has been recognized as an effective method in power flow analysis of a transmission *** volatility of measurements caused by variable distributed renewable energy sources makes it more difficult to accurately fit such equivalent *** tackle this challenge,this letter proposes a novel data-driven method to improve equivalency accuracy of DNs with distributed energy *** letter provides a new perspective that an equivalent model can be regarded as a mapping from internal conditions and border voltages to border power *** mapping can be established through 1)Koopman operator theory,and 2)physical features of power flow equations at the root node of a *** of the proposed method is demonstrated on the IEEE 33-bus and IEEE 136-bus test systems connected to a 661-bus utility system.

关键词： Data-driven distribution network Koopman operator theory static equivalent model

Challenges and opportunities for battery health estimation:bridging laboratory research and real-world applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第2期89卷 434-436,I0011页

作者： Te Han Jinpeng Tian C.y.chung yi-Ming Wei Center for Energy and Environmental Policy Research Beijing Institute of TechnologyBeijing 100081China School of Management and Economics Beijing Institute of TechnologyBeijing 100081China Department of Electrical and Electronic Engineering and Research Centre for Grid Modernization The Hong Kong Polytechnic UniversityKowloon 999077Hong KongChina

Addressing climate change demands a significant shift away from fossil fuels,with sectors like electricity and transportation relying heavily on renewable *** to this transition are energy storage systems,notably lithium-ion *** time,these batteries degrade,affecting their efficiency and posing safety *** and predicting battery aging is essential,especially estimating its state of health(SOH).Various SOH estimation methods exist,from traditional model-based approaches to machine learning approaches.

关键词： Energy storage systems State of health Multi-source data Scientific AI Data-sharing mechanism

Quantum correlations and entanglement in coupled optomechanical resonators with photon hopping via Gaussian interferometric power analysis

在线全文

学校读者我要写书评

暂无评论

Chinese Physics b 2024年第5期33卷 204-211页

作者： y.Lahlou b.Maroufi M.Daoud LPHE-MS Department of PhysicsFaculty of SciencesMohammed V UniversityRabatMorocco LPMS Department of PhysicsFaculty of SciencesIbn Tofail UniversityKénitraMorocco

Quantum correlations that surpass entanglement are of great importance in the realms of quantum information processing and quantum ***,for quantum systems prepared in pure states,it is difficult to differentiate between quantum entanglement and quantum ***,this indistinguishability is no longer holds for mixed *** contribute to a better understanding of this differentiation,we have explored a simple model for both generating and measuring these quantum *** study concerns two macroscopic mechanical resonators placed in separate Fabry–Pérot cavities,coupled through the photon hopping *** system offers a comprehensively way to investigate and quantify quantum correlations beyond entanglement between these mechanical *** key ingredient in analyzing quantum correlation in this system is the global covariance *** forms the basis for computing two essential metrics:the logarithmic negativity(E_(N)^(m))and the Gaussian interferometric power(P_(G)^(m)).These metrics provide the tools to measure the degree of quantum entanglement and quantum correlations,*** study reveals that the Gaussian interferometric power(P_(G)^(m))proves to be a more suitable metric for characterizing quantum correlations among the mechanical modes in an optomechanical quantum system,particularly in scenarios featuring resilient photon hopping.

关键词： quantum correlations entanglement Gaussian interferometric power logarithmic negativity optomechanics photon hopping

Self-adhesive pads in defi brillation or cardioversion: risks due to unfamiliarity and recommendations

在线全文

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第1期15卷 64-66页

作者： Hansol chung Department of Emergency Medicine Yeungnam University College of MedicineDaegu 42415Republic of Korea

During cardiopulmonary resuscitation(CPR),defibrillation,or cardioversion,the use of self-adhesive pads instead of conventional paddles has gradually become *** particular,it was recommended during the COVID-19 pandemic,as it allows defibrillation or cardioversion to be performed without close contact between the rescuer and patient.[1,2]Self-adhesive pads can minimize the downtime of chest compressions before and after defibrillation and protect the patient from electric arc formation,skin burns,and fi *** the pads are attached,electrocardiographic rhythm analysis,defibrillation,synchronous cardioversion,and cardiovascular support are all *** paddles,self-adhesive pads can save time because the application of conductive jelly,repeated positioning,and application of 10-12 kg of pressure on the chest are not *** European Resuscitation Council(ERC)Guidelines 2021 state that the use of self-adhesive pads is recommended in advanced cardiovascular life support(ACLS).[3]Nevertheless,some medical staff still tend to prefer the use of conventional paddles instead of self-adhesive pads in hospitals.

关键词： attached cardio conductive

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.b.Zhang S.J.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).by detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

Engineering behaviour of in situ cored deep cement mixed marine deposits subjected to undrained and drained shearing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1749-1760页

作者： Wei Li chung yee Kwok Faculty of Engineering China University of GeosciencesWuhan430074China Department of Civil Engineering The University of Hong Kong999000Hong Kong SARChina

The deep cement mixing(DCM)is used to improve the capacity and reduce the settlement of the soft ground by forming cemented clay *** investigation on the mechanical behaviour of the DCM samples is limited to either laboratory-prepared samples or in-situ samples under unconfined *** this study,a series of drained and undrained triaxial shearing tests was performed on the in-situ cored DCM samples with high cement content to assess their mechanical *** is found that the drainage condition affects significantly the stiffness,peak and residual strengths of the DCM samples,which is mainly due to the state of excess pore water pressure at different strain levels,*** positive before the peak deviatoric stress and negative after the peak deviatoric stress,in the undrained *** slope of the failure envelope changes obviously with the confining pressures,being steeper at lower stress levels and flatter at higher stress *** strength parameters,effective cohesion and friction angle obtained from lower stress levels(c′0 andφ′0)are 400 kPa and 58°,respectively,which are deemed to be true for design in most DCM applications where the in-situ stress levels are normally at lower values of 50-200 ***,the computed tomography(CT)scanning system was adopted to visualize the internal structures of DCM *** is found that the clay pockets existing inside the DCM samples due to uneven mixing affect markedly their stress-strain behaviour,which is one of the main reasons for the high variability of the DCM samples.

关键词： Deep cement mixing(DCM) In-situ cored sample Triaxial shearing Drainage condition Confining pressure Computed tomography(CT)

Evaluation of Industrial IoT Service Providers with TOPSIS based on Circular Intuitionistic Fuzzy Sets

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第7期80卷 715-746页

作者： Elif Çalo˘glu büyükselçuk Industrial Engineering Department Fenerbahçe University˙Istanbul34758Turkey

Industrial Internet of Things(IIoT)service providers have become increasingly important in the manufacturing industry due to their ability to gather and process vast amounts of data from connected devices,enabling manufacturers to improve operational efficiency,reduce costs,and enhance product *** platforms provide manufacturers with real-time visibility into their production processes and supply chains,allowing them to optimize operations and make informed *** addition,IIoT service providers can help manufacturers create new revenue streams through the development of innovative products and services and enable them to leverage the benefits of emerging technologies such as Artificial Intelligence(AI)and machine ***,the implementation of IIoT platforms in the manufacturing industry is crucial for companies seeking to remain competitive and meet the ever-increasing demands of customers in the digital *** this study,the evaluation criteria to be considered in the selection of IIoT service provider in small andmedium-sized(SME)manufacturing enterprises will be determined and IIoT service providers alternatives will be evaluated using the technique for order preference by similarity to an ideal solution(TOPSIS)method based on circular intuitionistic fuzzy *** on the assessments conducted in accordance with the literature review and expert consultations,a set of 8 selection criteria has been *** criteria encompass industry expertise,customer support,flexibility and scalability,security,cost-effectiveness,reliability,data analytics,as well as compatibility and *** evaluating these criteria,it was observed that the security criterion holds the highest significance,succeeded by cost-effectiveness,data analytics,flexibility and scalability,reliability,and customer support criteria,in descending order of *** the evaluation of seven distinct alternatives against these criteria,it was deduced tha

关键词： IIoT manufacturing TOPSIS circular intuitionistic fuzzy sets

Ensemble Wind Power Prediction Interval with Optimal Reserve Requirement

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第1期12卷 65-76页

作者： Hamid Rezaie Cheuk Hei chung Nima Safari the Saskatchewan Power Corporation(SaskPower) ReginaSaskatchewanCanada the Department of Electrical and Computer Engineering and Department of Human biology University of TorontoTorontoON M5S 3G4Canada the Alberta Electric System Operator(AESO) CalgaryAlbertaCanada

Wind power prediction interval(WPPI)models in the literature have predominantly been developed for and tested on specific case ***,wind behavior and characteristics can vary significantly across ***,a prediction model that performs well in one case might underperform in *** address this shortcoming,this paper proposes an ensemble WPPI framework that integrates multiple WPPI models with distinct characteristics to improve *** important and often overlooked factor is the role of probabilistic wind power prediction(WPP)in quantifying wind power uncertainty,which should be handled by operating *** reserve in WPPI frameworks enhances the efficacy of *** this regard,the proposed framework employs a novel bi-layer optimization approach that takes both WPPI quality and reserve requirements into *** analysis with different real-world datasets and various benchmark models validates the quality of the obtained WPPIs while resulting in more optimal reserve requirements.

关键词： Ensemble model linear programming operating reserve optimal reserve requirement prediction interval probabilistic prediction renewable integration uncertainty representation wind power prediction(WPP)