检索结果-南通市图书馆

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

端面铣削工件表面粗糙度数学模型与实验验证

表面技术 2024年第4期53卷 125-139页

作者：刘德伟许芝令李长河秦爱国刘波张彦彬 Yusuf suleiman Dambatta 安庆龙青岛理工大学机械与汽车工程学院山东青岛266520 青岛海空压力容器有限公司山东青岛266000 青岛卡沃斯智能制造有限公司山东青岛266109 四川新航钛科技有限公司四川什邡618400 香港理工大学超精密加工技术国家重点实验室中国香港999077 艾哈迈杜·贝洛大学机械工程学院卡杜纳810106尼日利亚上海交通大学机械与动力工程学院上海200240

目的针对多种表面粗糙度影响因素的耦合作用使轮廓形成机理不清,导致表面粗糙度数学模型存在表面质量智能管控工业应用预测精度不足的技术难题,建立端面铣削工件表面粗糙度数学模型。方法首先,基于加工运动学机理和刀具几何学分析端面... 详细信息

目的针对多种表面粗糙度影响因素的耦合作用使轮廓形成机理不清,导致表面粗糙度数学模型存在表面质量智能管控工业应用预测精度不足的技术难题,建立端面铣削工件表面粗糙度数学模型。方法首先,基于加工运动学机理和刀具几何学分析端面铣削工件表面轮廓形成机理,建立考虑刀具跳动的工件表面轮廓模型以及轮廓高度偏差关于铣削力的补偿函数,并通过卷积神经网络(Convolution Neural Network,CNN)进行解析。其次,建立端面铣削表面粗糙度数学模型。最后,进行可转位面铣刀端面铣削ZG32mnmo的实验验证,分别采集轮廓数据与铣削力信号,建立以铣削力为输入、轮廓高度偏差数据为输出的铣削数据集,训练卷积神经网络解析轮廓高度补偿值并验证理论模型的准确性,对比分析考虑刀具跳动的表面粗糙度数学模型与CNN优化考虑刀具跳动的表面粗糙度数学模型的精度。结果CNN优化考虑刀具跳动的表面粗糙度数学模型对加工重叠区与非重叠区内沿刀具进给方向的轮廓算术平均偏差Ra的预测误差分别为18.71%和14.14%,与考虑刀具跳动的表面粗糙度数学模型相比,精度分别提高了10.61%和32.83%,CNN优化考虑刀具跳动的表面粗糙度数学模型对轮廓单元的平均宽度R_(sm)和支承长度率R_(mr(c))的预测结果与实验值吻合。结论考虑刀具跳动以及动态铣削力耦合作用边界条件的表面粗糙度数学模型能够有效预测端面铣削表面粗糙度,可为在质量管控工程中的应用提供理论指导与技术支撑。

关键词：铣削轮廓形成机理表面粗糙度铣削力刀具跳动卷积神经网络

维普期刊数据库博看期刊

Complexed amino acid minerals ***-glycinate chelated minerals:Impact on the performance of old laying hens

在线全文

学校读者我要写书评

暂无评论

Animal Nutrition 2024年第1期16卷 395-408页

作者： marcos J.b.Santos maria C.m.m.Ludke Leandro m.Silva Carlos b.V.Rabello mércia R.barros Fabiano S.Costa Clariana S.Santos Jamille S.S.Wanderley Department of Animal Science Rural Federal University of PernambucoRecifePEBrazil Department of Veterinary Science Rural Federal University of PernambucoRecifePEBrazil

The present study was to evaluate the effect of trace minerals(Zn,mn,and Cu)from complexed amino acid minerals(ZmCAA)and bis-glycinate chelated minerals(ZmCGly)in laying hen diets on performance,internal and external egg quality,yolk mineral deposition,intestinal morphometry,and bone *** 78 to 98 weeks of age,400 White LSL-Lite strain laying hens were distributed in a randomized design with 4 treatments with 10 replicates per *** were distributed in a 2×2 factorial arrangement using either Zn,mn,and Cu of ZmCAA or ZmCGly source at 2 levels:low(20,20,and 3.5 mg/kg of Zn,mn,and Cu,respectively)or high(40,40,and 7 mg/kg of Zn,mn,and Cu,respectively).The analysis of variance was performed,and in cases where differences were observed,the means were compared using Tukey?s test(Pmineral supplementation had a significant impact on the performance of laying *** fed ZmCAA had higher egg production(P=0.01),egg weight(P=0.02),egg mass(P=0.01),and lower feed conversion ratio(P=0.05)compared to those fed *** ZmCAA supplementation showed higher albumen height(P=0.01),albumen weight(P=0.01),and eggshell thickness(Pmn(Pbone densitometry(Pbia were higher with ZmCAA *** the small intestine,ZmCAA resulted in longer villi(P=0.02)and shorter crypt depth(P=0.01)in the *** and ileum measurements were influenced by the level and source of trace minerals(PmCAA exhibited superior performance,egg quality,deposition of trace minerals in the egg yolk,and bone density compared to hens fed *** this study,older laying hens supplemented with ZmCAA at lower levels demonstrated adequate levels of supplementation.

关键词： bis-glycinates metal-amino acids Radiodensity Trace minerals

Rare earth-doped mixed Ni-Cu-Zn ferrites as an effective photocatalytic agent for active degradation of Rhodamine b dye

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 488-496,I0003页

作者： Swapnil A.Jadhav Sandeep b.Somvanshi Sudarshan S.Gawali Kranti Zakde K.m.Jadhav Department of Physics Dr.Babasaheb Ambedkar Marathwada UniversityAurangabad431004MaharashtraIndia School of materials Engineering Purdue UniversityWest Lafayette 47906USA University Department of basic and Applied Sciences MGM UniversityAurangabad431003MaharashtraIndia

In this study, a series of Gd^(3+)-doped mixed Ni-Cu-Zn ferrites with composition of Zn_(0.5)Ni_(0.3)Cu_(0.2)Fe_(2-x)Gd_(x)O_(4)(x = 0, 0.025, 0.05, 0.075, 0.1) was prepared using self-ignition sol-gel method. The prepared nanoparticles with an average size ranging from 22 to 26 nm show a single-phase cubic structure belonging to the spinel matrix. A rise in the Gd^(3+)concentration leads to an increase in crystallite size and lattice parameter. In Fourier transform infrared spectra, two main absorption bands belonging to the spinel structure are observed. The high-frequency bands(v_(1)) represent the tetrahedral complex, while the lowfrequency bands(v_(2)) signify the octahedral complex. The optical bandgap of the nanoferrites is found within the range of 2.91 to 2.41 eV, depending on their size. The magnetic characteristics of the material,such as saturation magnetization and coercivity are significantly altered with the concentration of Gd^(3+)in the solution. Using Rhodamine b(Rhb) as a model organic pollutant, an in-depth investigation of the photocatalytic activity of the compounds was carried out. The present outcomes show that adding an adequate amount of Gd^(3+)significantly enhances the number of hydroxyl radicals produced by the ferrite,in turn, increasing the photocatalytic activity of the material. mechanism elucidated by scavenger studies reveals that ·OH and holes are the primary reactive radicals responsible for the degradation *** photocatalysts show an insignificant performance loss in five consecutive cycles. Thus, it is concluded that these photocatalysts are highly suitable for the remediation of dye-contaminated wastewater.

关键词： Gd^(3+)substitution Spinel ferrite Structural properties magnetic properties Photocatalysis Rare earths

Generation of polarized electron beams through self-injection in the interaction of a laser with a pre-polarized plasma

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第3期12卷 62-68页

作者： L.R.Yin X.F.Li Y.J.Gu N.Cao Q.Kong m.büscher S.m.Weng m.Chen Z.m.Sheng Key Laboratory of Nuclear Physics and Ion-beam Application(moE) Institute of Modern PhysicsDepartment of Nuclear Science and TechnologyFudan UniversityShanghaiChina State Key Laboratory of High Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina SANKEN(Institute of Scientific and Industrial Research) Osaka UniversityOsakaJapan Sichuan Research Institute Shanghai Jiao Tong UniversityChengduChina Peter Grünberg Institut(PGI-6) Forschungszentrum JülichJülichGermany Institut für Laser-und Plasmaphysik Heinrich-Heine-Universität DüsseldorfDüsseldorfGermany Key Laboratory for Laser Plasmas(moE) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghaiChina Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghaiChina Tsung-Dao Lee Institute Shanghai Jiao Tong UniversityShanghaiChina

Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particlein-cell *** evolution of the electron beam polarization is studied based on the Thomas±bargmann±michel±Telegdi equation for the transverse and longitudinal self-injection,and the depolarization process is found to be influenced by the injection *** the case of transverse self-injection,as found typically in the bubble regime,the spin precession of the accelerated electrons is mainly influenced by the ***,in the case of longitudinal injection in the quasi-1D regime(for example,*** et al.,***.110,135002(2013)),the direction of electron spin oscillates in the laser *** the electrons move around the laser axis,the net influence of the laser field is nearly zero and the contribution of the wakefield can be ***,an ultra-short electron beam with polarization of 99%can be obtained using longitudinal self-injection.

关键词： laser wakefield acceleration longitudinal self-injection particle-in-cell simulation polarized electron beam

Experimental studies on the energy dissipation of bolted structures with frictional interfaces:A review

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第8期12卷 1623-1654页

作者： Yongfeng WANG Yanhong mA Jie HONG Giuseppe b.ATTIATO Christian m.FIRRONE School of Energy and Power Engineering Beihang UniversityBeijing 102206China Research Institute of Aero-Engine Beihang UniversityBeijing 102206China Politecnico di Torino Department of Mechanical and Aerospace EngineeringTorino 10139Italy

bolted joints play a more and more important role in the structure with lighter weight and heavier *** paper aims to provide an overview of different experimental approaches for the dynamic behavior of structures in the presence of bolted joints,especially the energy dissipation or damping at frictional *** comprehension of energy dissipation mechanisms due to friction is provided first,while the key parameters and the measurement techniques,such as the excitation force,the preload of the bolt,or the pressure at the interfaces,are briefly ***,the round-robin systems aim to measure the hysteresis parameters of the frictional joints under tangential loads are reviewed,summarizing the basic theory and the strategies to apply the excitation force or acquire the response in different testing *** by parameter identification strategies for bolted structures,the test rigs with one or more simplified bolted joints are summarized to give an insight into the understanding of typical characteristics of bolted structures,which are affected by the presence of *** complex test rigs hosting real-like or actual engineering structures with bolted lap or flange joints are also introduced to show the identification process of the dynamic characteristics of bolted connections employed in specific *** on the review paper,researchers can get the basic knowledge about the experimental systems of the bolted structures,especially several classical round robin systems,such as the Gaul resonator and widely used brake-Reußbeam *** can take advantage of this background for more creative and effective future studies,make more progress on the study of assembled structures and understand the influence of bolting frictional connections on the dynamic response better.

关键词： review study bolted joints frictional damping experimental rigs measurements

Sodium nitroprusside as a signal molecule for up-regulating membrane characteristics,antioxidant defense system to improve flax productivity under water stress

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Oil Crop Science 2024年第3期9卷 160-169页

作者： N.m.Al-Ashkar b.A.bakry H.m.S.El-bassiouny m.m.S.Abdallah m.S.Sadak botany Department Agricultural and Biological Research InstituteNational Research Centre33 El Bohouth Street P.O.12622DokkiGizaEgypt Field Crops Research Department Agricultural and Biological Research InstituteNational Research Centre33 El Bohouth Street P.O.12622DokkiGizaEgypt

Water stress is a critical environmental adversity that significantly impacts the growth,development,and yield of flax *** this study,flax seeds were cultivated under different water irrigation requirements(WIR)(100%,75%,and 50%)to investigate the effects of exogenously supplied nitric oxide(NO)donor sodium nitroprusside(SNP)as foliar treatments at concentrations of 0.0 mmol/L,0.5 mmol/L,1.0 mmol/L,and 2.0 mmol/*** stress led to a significant decrease in plant growth,photosynthetic pigments,yield components such as oil and total carbohydrate *** also resulted in an increase in leaf H2O2 production,lipid peroxidation levels and activities of enzymatic antioxidants including polyphenol oxidase,superoxide dismutase,and nitrate reductase ***,foliar application of SNP improved photosynthetic pigments and antioxidant defense system which mitigated the negative impact of water stress on growth and yield productivity by reducing oxidative damage caused by reactive oxygen species *** use of SNP also decreased H_(2)O_(2) accumulation levels,lipid peroxidation levels,and improved membrane *** treatment at concentration of 2 mmol/L showed superior results compared to other concentrations with extremely significant increases observed in yield characteristics such as oil content,total carbohydrate percentages,and unsaturated fatty acids to saturated fatty acids ratio.

关键词： Flax Fatty acid Sodium nitroprusside Antioxidant enzymes Yield

Greatly enhanced corrosion/wear resistances of epoxy coating for mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.Xue X.J.Li J.H.Chu m.m.Li D.N.Zou L.b.Tong School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and manufacturing for Vehicle body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of mg alloys.

关键词： mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance blocking layer

Rational molecular design of efficient yellow-red dendrimer TADF for solution-processed OLEDs: a combined effect of substitution position and strength of the donors

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第5期67卷 1613-1623页

作者： Changfeng Si Dianming Sun Tomas matulaitis David b.Cordes Alexandra m.Z.Slawin Eli Zysman-Colman Organic Semiconductor Centre EaStCHEM School of ChemistryUniversity of St AndrewsSt AndrewsKY169STUK

The development of high-performance solution-processed red organic light-emitting diodes(OLEDs) remains a challenge,particularly in terms of maintaining efficiency at high luminance. Here, we designed and synthesized four novel orange-red thermally activated delayed fluorescence(TADF) dendrimers that are solution-processable: 2GCz bP, 2DPACz bP, 2FbP2GCz and 2FbP2DPACz. We systematically investigated the effect of substitution position and strength of donors on the optoelectronic properties. The reverse intersystem crossing rate constant(kRISC) of the emitters having donors substituted at positions 11and 12 of the dibenzo[a,c]phenazine(bP) is more than 10-times faster than that of compounds substituted having donors substituted at positions 3 and 6. Compound 2DPACz bP, containing stronger donors than 2GCz bP, exhibits a red-shifted emission and smaller singlet-triplet energy splitting, ΔE_(ST), of 0.01 e V. The solution-processed OLED with 10 wt% 2DPACz bP doped in m CP emitted at 640 nm and showed a maximum external quantum efficiency(EQE_(max)) of 7.8%, which was effectively maintained out to a luminance of 1,000 cd m-2. Such a device's performance at relevant display luminance is among the highest for solution-processed red TADF OLEDs. The efficiency of the devices was improved significantly by using 4Cz IPN as an assistant dopant in a hyperfluorescence(HF) configuration, where the 2DPACz bP HF device shows an EQEmaxof 20.0% at λEL of 605 nm and remains high at 11.8% at a luminance of 1,000 cd m-2, which makes this device one of the highest efficiency orange-to-red HF SP-OLEDs to date.

关键词： thermally activated delayed fluorescence solution-processing red OLEDs dibenzo[a,c]phenazine dendrimers

mitigating Urban Heat Island Effects: A Review of Innovative Pavement Technologies and Integrated Solutions

在线全文

学校读者我要写书评

暂无评论

Structural Durability & Health monitoring 2024年第5期18卷 525-551页

作者： S.F.Ismael A.H.Alias N.A.Haron b.b.Zaidan Abdulrahman m.Abdulghani Department of Civil Engineering Faculty of EngineeringUniversiti Putra MalaysiaSerdang43400Malaysia Central Region Heavy Civil DivisionGranite ConstructionWoodlandsTexas77381USA SP Jain School of Global management LidcombeSydneyNSW2141Australia Department of Communication Technology and Network Faculty of Computer Science and Information TechnologyUniversiti Putra MalaysiaSerdang43400Malaysia

In this review paper,we present a thorough investigation into the role of pavement technologies in advancing urban *** analysis traverses the historical evolution of these technologies,meticulously evaluating their socio-economic and environmental impacts,with a particular emphasis on their role in mitigating the urban heat island *** evaluation of pavement types and variables inﬂuencing pavement performance to be used in the multi-criteria decision-making(mCDm)framework to choose the optimal pavement application are at the heart of our *** serves to assess a spectrum of pavement options,revealing insights into the most effective and sustainable *** highlighting both the existing challenges and potential innovative solutions within theﬁeld,this paper aims to offer a directional compass for future urban planning and infrastructural *** review not only synthesizes the current state of knowledge but also aims to chart a course for future exploration,emphasizing the critical need for innovative and environmentally sensitive pavement tech-nologies in the creation of resilient and sustainable urban environments.

关键词： Pavement sustainability urban heat island environmental impact of pavements innovative pavement solutions economic and social implications sustainable development in urban areas