检索结果-南通市图书馆

The Crop Journal 2015年第2期3卷 118-124页

作者： Abdul Majeed Atif Muhmood Abid Niaz shahid Javid Zahid Ashfaq Ahmad Syed shahid hussain shah asrar hussain shah Soil Chemistry Section Institute of Soil Chemistry and Environmental Sciences Ayub Agricultural Research Institute

Conventional flat planting is commonly used for growing wheat in Pakistan and the crop is irrigated by flood irrigation, but it leads to ineffective use of applied nitrogen owing to poor aeration and leaching and volatilization losses. The practice also results in greater crop lodging, lower water use efficiency, and crusting of the soil surface. In contrast, bed planting of wheat not only saves water but improves fertilizer use efficiency and grain yield. Three years of pooled data from the present study showed that wheat planting on beds and nitrogen application at 120 kg ha-1produced 15.06% higher grain yield than flat planting at the same nitrogen rate. Similarly, 25.04%, 15.02%, 14.59%, and 29.83% higher nitrogen uptake, nitrogen use, and agronomic and recovery efficiencies, respectively, were recorded for bed compared to flat planting. Wheat planting on beds with a nitrogen application of80 kg ha-1gave a yield similar to that of flat planting with 120 kg ha-1nitrogen. However,the economic return was 29% higher in bed planting as compared to flat planting, when nitrogen was applied at 120 kg ha-1.

关键词： Bed and flat planting N uptake N use efficiency Grain yield

Optimizing Optical Fiber Faults Detection:A Comparative Analysis of Advanced Machine Learning Approaches

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第5期79卷 2697-2721页

作者： Kamlesh Kumar Soothar Yuanxiang Chen Arif hussain Magsi Cong Hu hussain shah School of Electronics Engineering Beijing University of Posts and TelecommunicationsBeijing100876China State Key Laboratory of Integrated Services Networks Xidian UniversityXi’an710071China State Key Laboratory ofNetworking and Switching Technology Beijing University of Posts and TelecommunicationsBeijing100876China

Efficient optical network management poses significant importance in backhaul and access network communicationfor preventing service disruptions and ensuring Quality of Service(QoS)*** emerging faultsin optical networks introduce challenges that can jeopardize the network with a variety of *** existingliterature witnessed various partial or inadequate *** the other hand,Machine Learning(ML)hasrevolutionized as a promising technique for fault detection and *** traditional fault managementsystems,this research has three-fold ***,this research leverages the ML and Deep Learning(DL)multi-classification system and evaluates their accuracy in detecting six distinct fault types,including fiber cut,fibereavesdropping,splicing,bad connector,bending,and PC ***,this paper assesses the classificationdelay of each classification ***,this work proposes a fiber optics fault prevention algorithm thatdetermines to mitigate the faults *** work utilized a publicly available fiber optics dataset namedOTDR_Data and applied different ML classifiers,such as Gaussian Naive Bayes(GNB),Logistic Regression(LR),Support Vector Machine(SVM),K-Nearest Neighbor(KNN),Random Forest(RF),and Decision Tree(DT).Moreover,Ensemble Learning(EL)techniques are applied to evaluate the accuracy of various *** addition,this work evaluated the performance of DL-based Convolutional Neural Network and Long-Short Term Memory(CNN-LSTM)hybrid *** findings reveal that the CNN-LSTM hybrid technique achieved the highestaccuracy of 99%with a delay of 360 *** the other hand,EL techniques improved the accuracy in detecting fiberoptic ***,this research comprehensively assesses accuracy and delay metrics for various classifiers andproposes the most efficient attack detection system in fiber optics.

关键词： Fiber optics fault detection multiclassification machine learning ensemble learning

Accelerated Particle Swarm Optimization Algorithm for Efficient Cluster Head Selection in WSN

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第6期79卷 3585-3629页

作者： Imtiaz Ahmad Tariq hussain Babar shah Altaf hussain Iqtidar Ali Farman Ali Institute of Computer Sciences and Information Technology The University of AgriculturePeshawarPakistan School of Computer Science and Technology Zhejiang Gongshang UniversityHangzhouChina College of Technological Innovation Zayed UniversityDubaiUnited Arab Emirates School of Computer Science and Technology Chongqing University of Posts and TelecommunicationsChongqing400065China Department of Applied AI School of ConvergenceCollege of Computing and InformaticsSungkyunkwan UniversitySeoul03063South Korea

Numerous wireless networks have emerged that can be used for short communication ranges where the infrastructure-based networks may fail because of their installation and *** of them is a sensor network with embedded sensors working as the primary nodes,termed Wireless Sensor Networks(WSNs),in which numerous sensors are connected to at least one Base Station(BS).These sensors gather information from the environment and transmit it to a BS or gathering *** have several challenges,including throughput,energy usage,and network lifetime *** strategies have been applied to get over these *** may,therefore,be thought of as the best way to solve such ***,it is crucial to analyze effective Cluster Head(CH)selection to maximize efficiency throughput,extend the network lifetime,and minimize energy *** paper proposed an Accelerated Particle Swarm Optimization(APSO)algorithm based on the Low Energy Adaptive Clustering Hierarchy(LEACH),Neighboring Based Energy Efficient Routing(NBEER),Cooperative Energy Efficient Routing(CEER),and Cooperative Relay Neighboring Based Energy Efficient Routing(CR-NBEER)*** the help of APSO in the implementation of the WSN,the main methodology of this article has taken *** simulation findings in this study demonstrated that the suggested approach uses less energy,with respective energy consumption ranges of 0.1441 to 0.013 for 5 CH,1.003 to 0.0521 for 10 CH,and 0.1734 to 0.0911 for 15 *** sending packets ratio was also raised for all three CH selection scenarios,increasing from 659 to *** number of dead nodes likewise dropped for the given combination,falling between 71 and *** network lifetime was deemed to have risen based on the results found.A hybrid with a few valuable parameters can further improve the suggested APSO-based *** to underwater,WSN can make use of the proposed *** overall results have been evaluated and

关键词： Wireless sensor network cluster head selection low energy adaptive clustering hierarchy accelerated particle swarm optimization

Decoding bone-inspired and cell-instructive cues of scaffolds for bone tissue engineering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Engineered Regeneration 2024年第1期5卷 21-44页

作者： Zahid hussain shah Mehmood Xingzhu Liu Yuanshan Liu Guocheng Wang Renjun Pei School of Nano-Tech and Nano-Bionics University of Science and Technology of China(USTC)Hefei 230026PR China CAS Key Laboratory for Nano-Bio Interface Suzhou Institute of Nano-Tech and Nano-Bionics(SINANO)Chinese Academy of SciencesSuzhou 215123PR China Research Center for Human Tissues and Organs Degeneration Shenzhen Institute of Advanced Technology(SIAT)Chinese Academy of ScienceShenzhen 518055PR China

Bone fractures are common occurrence in clinical settings,creating a high demand for effective repair ***,limited graft availability,donor site morbidities,unpredictable clinical outcomes,immunologic reactions,infection risks,and geometrical mismatching concerns hampered tissue graft use and underscored the need for scaffolds for more effective bone reconstructions due to their tunable *** progress has been carried out in past decade in the fields of nanoceramics synthesis,bioconjugate chemistry,and composite material *** review outlines hierarchical structures and biology of bone tissue,materialistic compo-nents of scaffolds(bioceramics,polymers,bioactive drugs),featured scaffolding strategies(nanofibers,hydrogels,aerogels,bioprinting,and fiber-reinforced composite),and emphasis that hierarchical and physiochemical char-acteristics of bone should be used as an inspiration for scaffold *** review discussed how differences in materiobiological aspects of scaffolds,such as polymer/bioceramic nanocomposite,mineralized nanocomposite,matrix-rich nanocomposite,3D microenvironmental cues,pore space cues,mechanical cues,usage of physical stimulation(magnetic,electroactive,and photoactivated cues),surface cues(wettability,roughness,textured,and surface charge),and biointerface cues(cell-biomaterial interactions,cell-selective homing,and cell regula-tory strategies)modulate cellular and biological response for bone tissue *** study further outlines the challenges and benefits of integrating materiobiological cues of scaffolds for bone tissue engineering.

关键词： Bone substitute Scaffolds Mineralization Materiobiology Bone tissue engineering

Toward a comprehensive hypothesis of oxygen-evolution reaction in the presence of iron and gold

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第2期89卷 172-183,I0005页

作者： Negah Hashemi Jafar hussain shah Cejun Hu Subhajit Nandy Pavlo Aleshkevych Sumbal Farid Keun Hwa Chae Wei Xie Taifeng Liu Junhu Wang Mohammad Mahdi Najafpour Department of Chemistry Institute for Advanced Studies in Basic Sciences(IASBS)Zanjan 45137-66731Iran Center for Advanced Mössbauer Spectroscopy Mössbauer Effect Data CenterDalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina Key Lab of Advanced Energy Materials Chemistry(Ministry of Education) Renewable Energy Conversion and Storage CenterCollege of ChemistryNankai UniversityTianjin 300071China Advanced Analysis Center Korea Institute of Science and TechnologySeoul 02792Republic of Korea Institute of Physics Polish Academy of SciencesWarsaw 02-668Poland National and Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials Henan UniversityKaifeng 475004HenanChina Center of Climate Change and Global Warming Institute for Advanced Studies in Basic Sciences(IASBS)Zanjan 45137-66731Iran Research Center for Basic Sciences&Modern Technologies(RBST) Institute for Advanced Studies in Basic Sciences(IASBS)Zanjan 45137-66731Iran

This study investigates the effects of Fe on the oxygen-evolution reaction(OER)in the presence of *** distinct areas of OER were identified:the first associated with Fe sites at low overpotential(~330 mV),and the second with Au sites at high overpotential(~870 mV).Various factors such as surface Fe concentration,electrochemical method,scan rate,potential range,concentration,method of adding K_(2)Fe O_(4),nature of Fe,and temperature were varied to observe diverse behaviors during OER for Fe O_(x)H_(y)/*** amounts of Fe ions had a significant impact on OER,reaching a saturation point where the activity did not increase *** electronic interaction between Fe and Au ions was indicated by X-ray photoelectron spectroscopy(XPS)and electron paramagnetic resonance(EPR)*** situ visible spectroscopy confirmed the formation of Fe O_(4)^(2-)during *** situ Mossbauer and surfaceenhanced Raman spectroscopy(SERS)analyses suggest the involvement of Fe-based species as intermediates during the rate-determining step of OER.A lattice OER mechanism based on Fe O_(x)H_(y)was proposed for operation at low *** functional theory(DFT)calculations revealed that Fe oxide,Fe-oxide clusters,and Fe doping on the Au foil exhibited different activities and stabilities during *** study provides insights into the interplay between Fe and Au in OER,advancing the understanding of OER mechanisms and offering implications for the design of efficient electrocatalytic systems.

关键词： DFT calculation Fe/Au electrocatalysis Mechanism Oxygen evolution Water oxidation

A Hybrid Deep Learning and Machine Learning-Based Approach to Classify Defects in Hot Rolled Steel Strips for Smart Manufacturing

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第8期80卷 2099-2119页

作者： Tajmal hussain Jungpyo Hong Jongwon Seok Department of Information and Communication Engineering Changwon National UniversityChangwon51140Republic of Korea

Smart manufacturing is a process that optimizes factory performance and production quality by utilizing various technologies including the Internet of Things(IoT)and artificial intelligence(AI).Quality control is an important part of today’s smart manufacturing process,effectively reducing costs and enhancing operational *** technology in the industry becomes more advanced,identifying and classifying defects has become an essential element in ensuring the quality of products during the manufacturing *** this study,we introduce a CNN model for classifying defects on hot-rolled steel strip surfaces using hybrid deep learning techniques,incorporating a global average pooling(GAP)layer and a machine learning-based SVM classifier,with the aim of enhancing ***,features are extracted by the VGG19 convolutional ***,after processing through the GAP layer,the extracted features are fed to the SVM classifier for *** this purpose,we collected images from publicly available datasets,including the Xsteel surface defect dataset(XSDD)and the NEU surface defect(NEU-CLS)datasets,and we employed offline data augmentation techniques to balance and increase the size of the *** outcome of experiments shows that the proposed methodology achieves the highest metrics score,with 99.79%accuracy,99.80%precision,99.79%recall,and a 99.79%F1-score for the NEU-CLS ***,it achieves 99.64%accuracy,99.65%precision,99.63%recall,and a 99.64%F1-score for the XSDD dataset.A comparison of the proposed methodology to the most recent study showed that it achieved superior results as compared to the other studies.

关键词： Smart manufacturing steel defect detection deep learning CNN

Attitude-adjusting dynamical behavior of cubic rover on low-gravity testbed

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Astrodynamics 2024年第1期8卷 149-159页

作者： Bowen Jiang Muhammad Talha hussain Xiangyuan Zeng School of Automation Beijing Institute of TechnologyBeijing100081China

Cubic rovers that traverse by hopping systems are promising in low-gravity *** several analyses of the control methods and mobility of the cubic rover are available,investigations of its attitude-adjusting behavior are still *** study derives the dynamic equations of the two attitude-adjusting modes of the cubic rover,referred to as walking and *** relationships between the speed threshold and rotation angle of the cubic rover were investigated in both rigid and regolith environments using a self-designed low-gravity *** studies were conducted by considering the experimental and simulated *** results of this study can be interesting for roving mission planning when exploring planetary moons and small celestial bodies.

关键词： low-gravitytestbed attitude-adjusting motion cubic rover experimental study

Intelligent algorithm-based maximum power point tracker for an off-grid photovoltaic-powered direct-current irrigation system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CLEAN ENERGY 2024年第3期8卷 48-61页

作者： Attia, hussain Takruri, Maen Al-Ataby, Ali Amer Univ Ras Al Khaimah Dept Elect Elect & Commun Engn Ras Al Khaymah U Arab Emirates

This research aims to enhance the performance of photovoltaic (PV) systems on a 2-fold basis. Firstly, it introduces an advanced deep artificial neural network algorithm for accurate and fast maximum power point tracking, ensuring optimal extraction of electrical power from PV arrays. Secondly, it proposes the use of 96-V, 2.98-kW direct-current (DC) water pumps for farm irrigation, aiming to improve efficiency, reduce cost and complexity, and overcome challenges associated with connecting faraway farm irrigation systems to the utility grid. In this study, it has been demonstrated that the use of DC pumps greatly improves system performance and efficiency by eliminating the need for isolation transformers, power passive filters and inverters, therefore simplifying the architecture of the system. The efficacy of the proposed methodology is confirmed by MATLAB (R)/Simulink (R) simulation results, whereby the proposed algorithm attains a mean squared error of 6.5705 x 10-5 and a system efficiency approaching 99.8%, ensuring a steady voltage under varying load conditions. This study demonstrates the use of direct-current electricity from solar PV to power farm irrigation pumps in a way that greatly improves system performance and efficiency, reduces cost and simplifies the architecture of the system. Graphical Abstract

关键词： artificial neural network photovoltaic arrays maximum power point tracking buck converter direct-current irrigation systems MATLAB/Simulink ENERGY-STORAGE

PdCu alloy anchored defective titania for photocatalytic conversion of carbon dioxide into methane with 100% selectivity

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 254-265页

作者： Lina Zhang Sajjad hussain Qiuye Li Jianjun Yang National&Local Joint Engineering Research Center for Applied Technology of Hybrid Nanomaterials Henan UniversityKaifeng 475004HenanChina

The photoreduction of CO_(2)into CH_(4)with simultaneous high activity and selectivity is a promising strategy to increase energy supply and alleviate global ***,the absence of the active sites that is responsible for the adsorption and activation of CO_(2)and the generation of CO and H2via side reactions often lead to poor efficiency and low selectivity of the ***,Cu,Pd,and PdCu metal clusters cocatalyst-anchored defective TiO_(2)nanotubes(Cu/TiO_(2)-SBO,Pd/TiO_(2)-SBO,and Pd1Cu1/TiO_(2)-SBO)were designed via a simple solution impregnation reduction and applied for photocatalytic conversion of CO_(2)to CH_(4).The Pd1Cu1/TiO_(2)-SBO photocatalyst exhibits excellent catalytic performance among the other catalysts for photoreduction of CO_(2)into CH_(4).More interestingly,the product selectivity of CH_(4)reaches up to 100%with a rate of 25μmol g^(-1)h^(-1).In-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and density functional theory(DFT)simulations indicate that the main reasons for the high selectivity of CH_(4)are attributed to the PdCu alloy and oxygen vacancies,which jointly enhance the photoinduced carrier separation and lower energy barriers of key ***,due to the tunable d-band center of the Cu site in the PdCu alloy,the generated intermediates can be well prevented from poisoning and promoted to participate in further ***,the current study will provide insight into the development of new,highly selective photocatalysts for the visible light-catalytic reduction of CO_(2)into CH_(4).

关键词： PdCu alloy Defective TiO_(2) Photoreduction of CO_(2) Photocatalytic mechanism

Deep Learning for Financial Time Series Prediction:A State-of-the-Art Review of Standalone and HybridModels

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第4期139卷 187-224页

作者： Weisi Chen Walayat hussain Francesco Cauteruccio Xu Zhang School of Software Engineering Xiamen University of TechnologyXiamen361024China Peter Faber Business School Australian Catholic UniversityNorth Sydney2060Australia Department of Information Engineering Polytechnic University of MarcheAncona60121Italy

Financial time series prediction,whether for classification or regression,has been a heated research topic over the last *** traditional machine learning algorithms have experienced mediocre results,deep learning has largely contributed to the elevation of the prediction ***,the most up-to-date review of advanced machine learning techniques for financial time series prediction is still lacking,making it challenging for finance domain experts and relevant practitioners to determine which model potentially performs better,what techniques and components are involved,and how themodel can be designed and *** review article provides an overview of techniques,components and frameworks for financial time series prediction,with an emphasis on state-of-the-art deep learning models in the literature from2015 to 2023,including standalonemodels like convolutional neural networks(CNN)that are capable of extracting spatial dependencies within data,and long short-term memory(LSTM)that is designed for handling temporal dependencies;and hybrid models integrating CNN,LSTM,attention mechanism(AM)and other *** illustration and comparison purposes,models proposed in recent studies are mapped to relevant elements of a generalized framework comprised of input,output,feature extraction,prediction,and related *** the state-of-the-artmodels,hybrid models like CNNLSTMand CNN-LSTM-AM in general have been reported superior in performance to stand-alone models like the CNN-only *** remaining challenges have been discussed,including non-friendliness for finance domain experts,delayed prediction,domain knowledge negligence,lack of standards,and inability of real-time and highfrequency *** principal contributions of this paper are to provide a one-stop guide for both academia and industry to review,compare and summarize technologies and recent advances in this area,to facilitate smooth and informed implementation,and t

关键词： Financial time series prediction convolutional neural network long short-term memory deep learning attention mechanism finance