检索结果-南通市图书馆

Capturing Plateau-Rayleigh instability in silver nanowires via ultrafast electron microscopy

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第9期17卷 8402-8407页

作者： shuai.Jiang Volkan Ortalan Department of Materials Science and Engineering University of ConnecticutStorrsCT 06269USA

Understanding the structural stability of nanomaterials such as nanowires is imperative for their practical ***,using single-shot ultrafast transmission electron microscopy,we captured the Plateau-Rayleigh instability behavior of silver nanowires decomposing into silver nanoparticles upon laser irradiation on nanosecond time *** found that this dynamic process can be accelerated by a factor of 10 through increasing the peak laser fluence from 6.03 to 14.60 mJ/cm^(2).Moreover,by comparing the laser fluence required to initiate the Plateau-Rayleigh instability in silver nanowires on carbon and Formvar membranes,it was found that the main driving force for the Plateau-Rayleigh instability in this study was substrate *** element analysis and molecular dynamics simulations are also applied to estimate the temperature jump of the nanowires and atomistic behavior,*** addition,the complex motions of silver nanowires under laser irradiation were systematically investigated by combining the results of ultrafast transmission electron microscopy with scanning electron microscopy characterizations and were determined to be related to nanowire-membrane interactions or pre-existing stresses on the nanowires,which in turn demonstrated the potential of ultrafast transmission electron microscopy for the characterization of nanomaterials and devices under extreme conditions.

关键词： silver nanowire Plateau-Rayleigh instability ultrafast transmission electron microscopy molecular dynamics simulation

A short review of antibacterial Cu-bearing stainless steel:antibacterial mechanisms,corrosion resistance,and novel preparation techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 24-45页

作者： shuai.Liu Han-jie Guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials University of Science and Technology BeijingBeijing100083China

Cu-bearing stainless steel is widely used in the fields of food,medical and household sanitary equipment because of its surface finish and corrosion ***,the growth of bacteria on stainless steel leads to the formation of biofilms,which causes ***,the antibacterial property of stainless steel is a worthy research *** of breakthroughs in the field of corrosion resistance and antimicrobial properties are still ***,due to the scarcity of publications on the antibacterial mechanisms and processing methods of antibacterial Cu-bearing stainless steel,we review the current state of relevant research and *** toxicity of Cu,corrosion resistance mechanism of stainless steel,and antibacterial mechanism and preparation method of antibacterial stainless steel are *** addition,alloying,surface modification and other methods are found to have limitations in balancing the toxicity and antibacterial properties of copper and the relationship between the antibacterial properties and corrosion resistance of Cu-bearing stainless steel.A new preparation method of antibacterial stainless steel associated with selective laser melting(SLM)is *** is becoming a powerful additive manufacturing technology that can be used to manufacture customized and complex *** research status of SLM applied in antibacterial stainless steel preparation is ***,the future research direction of Cu-bearing antibacterial stainless steel is discussed.

关键词： Cu-bearing stainless steel Antibacterial Processing Additive manufacturing Corrosion resistance

Review of the development of power system out-of-step splitting control and some thoughts on the impact of large-scale access of renewable energy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy and AI 2024年第2期16卷 497-511页

作者： shuai.Zhang School of Control Science and Engineering Shandong UniversityJinan 250061China

Out-of-step oscillation is a very destructive physical phenomenon in power system, which could directly cause big blackout accompanied by serious sociology-economic impacts. Out-of-step splitting control is an indispensable means, which could protect the system from major shocks of out-of-step oscillation. After years of development, it has achieved certain amount of research results. Have the existing methods been able to meet the requirements of out-of-step splitting? What improvements are needed? Under this background, this review is written. It combs the development of out-of-step splitting control technologies and analyzes the technical routes and characteristics of different methods. It points out the contradiction between rapidity and optimality is the biggest technical problem, existing in both the traditional local measurement based out-of-step splitting protection and the wide-area information based out-of-step splitting protection. It further points out that the advantages of the two types of protections can be combined with the unique physical characteristics of the out-of-step center to form a more advantageous splitting strategy. Besides, facing the fact of large-scale renewable energy access to power grid in recent years, this review also analyzes the challenges brought by it and provides some corresponding suggestions. It is hoped to provide some guidance for the subsequent research work.

关键词： Out-of-step oscillation Out-of-step splitting control Wide-area measurement information Contradiction between rapidity and optimality Large-scale renewable energy access

Reinforcing effects of polypropylene on energy absorption and fracturing of cement-based tailings backfill under impact loading

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 650-664页

作者： Jiajian Li shuai.Cao Erol Yilmaz School of Civil and Resources Engineering University of Science and Technology BeijingBeijing 100083China State Key Laboratory of High-Efficient Mining and Safety of Metal Mines of Ministry of Education University of Science and Technology BeijingBeijing 100083China Department of Civil Engineering Geotechnical DivisionRecep Tayyip Erdogan UniversityFenerRize TR53100Turkey

Polypropylene(PP)fiber-reinforced cement-based tailings backfill(FRCTB)is a green compound material with superior crack resistance and has good prospects for application in underground ***,FRCTB exhibits susceptibility to dynamic events,such as impact ground pressure and blast *** paper investigates the energy and crack distribution behavior of FRCTB under dynamic impact,considering the height/diameter(H/D)*** Hopkinson pressure bar,industrial computed tomography scan,and scanning electron microscopy(SEM)experiments were carried out on six types of *** outcomes confirmed fiber aggregation at the bottom of *** H/D was less than 0.8,the proportion of PP fibers distributed along theθangle direction of80°-90°*** the total energy,all samples presented similar energy absorption,reflectance,and ***,a rise in H/D may cause a rise in the energy absorption rate of FRCTB during the peak phase.A positive correlation existed between the average strain rate and absorbed energy per unit *** increase in H/D resulted in a decreased crack volume fraction of *** the H/D was greater than or equal to 0.7,the maximum crack volume fraction of FRCTB was observed close to the incidence *** cracks were present only in the FRCTB with an H/D ratio of *** with H/D ratios of 0.5 and 0.6 showed similar distributions of weakly and heavily damaged *** fibers can limit the emergence and expansion of cracks by influencing their *** observations revealed considerable differences in the bonding strengths between fibers and the *** that adhered particularly well to the substrate were attracted together with the hydration products adhering to *** results show that FRCTB is promising as a sustainable and green backfill for determining the design properties of mining with backfill.

关键词： cement-based tailings fiber-reinforced backfills fracture energy absorption impact loading

Data Driven Vibration Control:A Review

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第9期11卷 1898-1917页

作者： Weiyi Yang shuai.Li Xin Luo Chongqing Institute of Green and Intelligent Technology Chinese Academy of SciencesChongqing 400714 Chongqing School University of Chinese Academy of SciencesChongqing 400714China Faculty of Information Technology and Electrical Engineering University of OuluOulu 90570 VTT-Technology Research Center of Finland Oulu 90570Finlan College of Computer and Information Science Southwest UniversityChongqing 400715China

With the ongoing advancements in sensor networks and data acquisition technologies across various systems like manufacturing,aviation,and healthcare,the data driven vibration control(DDVC)has attracted broad interests from both the industrial and academic *** shaping(IS),as a simple and effective feedforward method,is greatly demanded in DDVC *** convolves the desired input command with impulse sequence without requiring parametric dynamics and the closed-loop system structure,thereby suppressing the residual vibration *** on a thorough investigation into the state-of-the-art DDVC methods,this survey has made the following efforts:1)Introducing the IS theory and typical input shapers;2)Categorizing recent progress of DDVC methods;3)Summarizing commonly adopted metrics for DDVC;and 4)Discussing the engineering applications and future trends of *** doing so,this study provides a systematic and comprehensive overview of existing DDVC methods from designing to optimizing perspectives,aiming at promoting future research regarding this emerging and vital issue.

关键词： Data driven vibration control(DDVC) data science designing method feedforward control industrial robot input shaping optimizing method residual vibration

Review on Security Defense Technology Research in Edge Computing Environment

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electronics 2024年第1期33卷 1-18页

作者： Ke SHANG Weizhen HE shuai.ZHANG National Digital Switching System Engineering and Technological R&D Center

Edge computing, which achieves quick data processing by sinking data computing and storage to the network edge, has grown rapidly along with the Internet of things. The new network architecture of edge computing brings new security challenges. Based on this, this paper investigates the edge computing security literature published in recent years and summarizes and analyzes research work on edge computing security from different attack surfaces. We start with the definition and architecture of edge computing. From the attack surface between device and edge server, as well as on edge servers, the research describes the security threats and defense methods of edge computing. In addition, the cause of the attack and the pros and cons of defense methods is introduced. The challenges and future research directions of edge computing are given.

关键词： Cloud computing Systems architecture Computer architecture Network architecture Data processing Security Servers

Anti-aging performance improvement and enhanced combustion efficiency of boron via the coating of PDA

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 399-410页

作者： shuai.Ma Qinghai Shu Mengyang Zhang Hongyu Huang Yansong Shi Xijuan Lv shuai.Zhao School of Materials Science and Engineering Beijing Institute of TechnologyBeijing100081China Key Lab of Advanced Optoelectronic Quantum Architecture and Measurement(MOE) Beijing Key Lab of Nanophotonics&Ultrafine Optoelectronic SystemsSchool of PhysicsBeijing Institute of TechnologyBeijing100081China Tangshan Research Institute of Beijing Institute of Technology Tangshan063000HebeiChina

Boron is an ambitious fuel in energetic materials since its high heat release values,but its application is prohibited by low combustion efficiency and oxidization during *** polydopamine(PDA)was introduced into boron particles,investigating the impact of PDA content on the energetic behavior of *** results indicated that the PDA coating formed a fishing net structure on the surface of boron *** heat release results showed that the combustion calorific value of B@PDA was higher than that of the raw ***,the actual combustion heat of boron powder in B@10%PDA increased by 38.08%.Meanwhile,the DSC peak temperature decreased by 100.65℃under similar oxidation rate compared to raw ***,the B@PDA@AP and B@AP composites were prepared,and their combustion properties were *** was demonstrated that B@10%PDA@AP exhibited superior performance in terms of peak pressure and burning time,*** peak pressure is 12.43 kPa more than B@AP and burning time is 2.22 times higher than B@***,the coating of PDA effectively inhibits the oxidization of boron during storage and enhances the energetic behavior of boron and corresponding composites.

关键词： Boron particles Polydopamine Anti-aging performance improvement Heat release

Hippocampal dopamine as a key regulator for learning deficits in Parkinson's disease

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第6期19卷 1193-1194页

作者： Kun Wu shuai.Liu Shanghai Key Laboratory of Brain Functional Genomics(Ministry of Education) Affiliated Mental Health Center(ECNU)School of Psychology and Cognitive ScienceEast China Normal UniversityShanghaiChina Shanghai Changning Mental Health Center ShanghaiChina NYU-ECNU Institute of Brain and Cognitive Science at NYU Shanghai ShanghaiChina

Parkinson's disease(PD)is a progressive neurodegenerative disorder with clinical symptoms of involuntary or uncontrollable movements such as tremors,rigidity,and *** learning deficit is largely overlooked in the past ... 详细信息

关键词： impaired dopamine clinical

A head-mounted photoacoustic fiberscope for hemodynamic imaging in mobile mice

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第6期13卷 1012-1014页

作者： Xiaoyan Zheng shuai.Na National Biomedical Imaging Center College of Future TechnologyPeking UniversityBeijing100871China Academy for Advanced Interdisciplinary Studies Peking UniversityBeijing100871China

A miniaturized photoacoustic fiberscope has been developed, featuring a lateral resolution of 9 microns and a lightweight design at 4.5 grams. Engineered to capture hemodynamic processes at single-blood-vessel resolution at a rate of 0.2 Hz, this device represents an advancement in head-mounted tools for exploring intricate brain activities in mobile animals.

关键词： fiber mobile Engine