检索结果-南通市图书馆

Geometric investigation of entrance proportions of houses from the Qajar to the beginning of the early Pahlavi in Dezful City(1789—1979)

在线全文

学校读者我要写书评

暂无评论

Frontiers of Architectural Research 2024年第1期13卷 57-78页

作者： Raziyeh Rezadoost Dezfuli Mohammad Mehrakizadeh Behnaz Safar Ali Najar Hassan Bazazzadeh Mohammadjavad mahdavinejad Department of Architecture Poznan University of Technology61-131 PoznanPoland Department of Architecture and Urban Planning Jundi Shapur University of TechnologyDezfulIran College of Engineering and Architecture University of Nizwa616 Birkat Al MawzOman Department of Architecture Faculty of Art and ArchitectureTarbiat Modares UniversityTehranIran

Due to the importance of the historical context of Dezful City,investigating historic buildings is *** unfortunately,a large part of it is being *** this reason,it is essential to discover the guidelines and logic behind the architectural design of these buildings to help their reconstruction or ***,there is no logical information about the components of this context and the reconstructions are usually done according to taste and based on architecture tested or personal ***,it is necessary to find a logic behind these critical components that support the whole plan or parts of it in a particular *** purpose of this research is to discover and find the logic behind the design of this building in the historical context of *** geometrical proportions can significantly help to reconstruct buildings better and more *** this purpose,30 historical houses of Dezful were randomly selected,and their input information was drawn in 2D form in ***,the length,width,and height proportions were measured,and the obtained ratios were compared with the golden proportions and dynamic *** paper studies entrance based on ratios of√2,√3,√4,√4,√1.25 andφ(the golden section).The results show that golden proportions and proportions derived from dynamic rectangles are present in the wording of all ***,the range of ratios in the plan is from 1.34 to 2,and the content of changes in the section is from 1.22 to *** results can help architects,and particularly building owners,to reconstruct based on existing logic by discovering the proportions of the entrances of the *** is possible to administer a part of the damaged tissue and estimate its dimensions and sizes because the proportions’completeness can help revive half-destroyed historical buildings.

关键词： Proportions Historical houses House entrance Dezful city Qajar period to early Pahlavi

Designerly optimization of devices(as reflectors)to improve daylight and scrutiny of the light-well’s configuration

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2022年第6期15卷 933-956页

作者： Ali Goharian Mohammadjavad mahdavinejad Mohammadreza Bemanian Khosro Daneshjoo Department of Architecture Tarbiat Modares UniversityTehranIran

One of the most effective ways of transmitting daylight into deep-plan buildings is to generate light-well for spaces away from the facade and window-less *** the limited methods of improving daylight efficiency in light-wells are reflectors that,as a surplus member of the wells,can aid in this improvement.A scrutiny of the light-well’s configuration can give a correct perception of the performance of the well’s walls with increasing the reflection coefficient to the designers in deciding where to install the openings,selecting the transmittance coefficient of glass,*** this paper,the main focus is designing and optimizing daylight assist devices on light-wells that can hierarchically reflect light from the sky to the bottom of the well(Device 1)and then emit into the desired space(Device 2).The research highlights that it is necessary to find a proper strategy for the devices regarding to the optimization *** research design results in a comprehensive standard solution for different *** simulations were performed by Honeybee Plus version 0.0.06 and Honeybee-Ladybug version 0.0.69-0.0.66,which has the ability to simulate annual daylight performance at certain *** to the maximum and minimum altitudes at any latitude,the study required time-criteria throughout the *** a result,a cross-sectional study was carried out at two critical times:the first period(P1)and the second period(P2).Daylight metrics for analyzing configuration as well as evaluating devices are E’max,avg(illumination)and SHA(hour/m2).The DA’300 and DA’max2000 metrics were selected to measure daylight efficiency and glare risk,respectively,and the sDA is for the amount of floor area that uses enough ***,to better percept how to prepare improved-daylight at lower levels(especially for the performance of devices),the daylight autonomy has been reduced from 50%to 40%and a metric such as sDA’t40 has been created.

关键词： light-well daylighting simulation daylight devices optimization Honeybee Plus plugin cross-sectional daylight simulation deep-plan buildings

Strongly Clean Matrix Rings over a Skew Monoid Ring

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

代数集刊:英文版 2023年第3期30卷 361-370页

作者： arezou Karimimansoub Mohammad-Reza(Rafsanjani)Sadeghi Department of Mathematics and Computer Science Amirkabir University of TechnologyTehranP.O.Box ***Iran

Let R be a ring with an endomorphismσ,F∪{0}the free monoid generated by U={u1,…,ut}with 0 added,and M a factor of F obtained by setting certain monomials in F to 0 such that M^(n)=0 for some *** we can form the non-semiprime skew monoid ring R[M;σ].A local ring R is called bleached if for any j∈J(R)and any u∈U(R),the abelian group endomorphisms l_(u)−r_(j) and l_(j)−r_(u) of R are *** R[M;σ],we provide various classes of both bleached and non-bleached local *** of the main problems concerning strongly clean rings is to characterize the rings R for which the matrix ring M_(n)(R)is strongly *** investigate the strong cleanness of the full matrix rings over the skew monoid ring R[M;σ].

关键词： skew monoid rings strongly clean rings matrix rings

Evaluating the different boundary conditions to simulate airflow and heat transfer in Double-Skin Facade

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2022年第5期15卷 799-815页

作者： Javad Ahmadi Mohammadjavad mahdavinejad Olena Kalyanova Larsen Chen Zhang Afsaneh Zarkesh Somayeh Asadi Highperformance Architecture Laboratory Department of ArchitectureTarbiat Modares UniversityJalal-e Al Ahmad HighwayNasr bridgeTehranIran Department of Built Environment Faculty of Engineering and ScienceDivision of Architectural EngineeringAalborg UniversityAalborgDenmark Department of Architectural Engineering Pennsylvania State UniversityPA 16801USA

The CFD simulation accuracy mostly depends on the appropriate setting of boundary conditions and numerical simulation *** study shows the influence of two types of boundary condition settings on the CFD simulation results of Double-Skin Facade(DSF)for a specific *** two boundary settings are the constant temperature on the DSF surfaces called Boundary A,and Boundary B is defined via solar radiation using the Discrete Ordinate radiation Model(DOM).The paper verified both the numerical simulations using the experimental *** the numerical results of two types of boundaries with experimental data shows that both cases underestimated the values lower than 5.2 K and 0.1 m/s for the temperature and velocity respectively at the regarded measured *** A gives more accurate temperature prediction results,while Boundary B shows velocity magnitude closer to the measurements in the middle height of the cavity;the average temperature and velocity differences between the two boundary types are 0.6 K and 0.003 m/s respectively which are ***,the selection of boundary conditions depends on study purposes,however,when the DSF is equipped with blinds and if there is not enough data in hand but the exact value of solar irradiation,using the Boundary B approach is suggested;it can provide reasonable results associated with multi-type of thermal boundary conditions at the same ***,if the goal is to investigate the flow pattern in the DSF,Boundary B is argued to perform better than the constant temperature boundary condition.

关键词： Double-Skin Facade boundary conditions thermal performance airflow irradiation

Application of different CFD multiphase models to investigate effects of baffles and nanoparticles on heat transfer enhancement

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2014年第3期8卷 320-329页

作者： Ali SHAHMOHAMMADI arezou JAFARI Chemical Engineering Department Tarbiat Modares University Tehran 114-14115 Iran

In this work, the effect of baffles in a pipe on heat transfer enhancement was studied using computa- tional fluid dynamics （CFD） in the presence of Al2O3 nanoparticles which are dispersed into water. Fluid flow through the horizontal tube with uniform heat flux was simulated numerically and three dimensional governing partial differential equations were solved. To find an accurate model for CFD simulations, the results obtained by the single phase were compared with those obtained by three different multiphase models including Eulerian, mixture and volume of fluid （VOF） at Reynolds numbers in range of 600 to 3000, and two different nanoparticle concentrations （1% and 1.6%）. It was found that multi- phase models could better predict the heat transfer in nanofluids. The effect of baffles on heat transfer of nanofluid flow was also investigated through a baffled geometry. The numerical results show that at Reynolds numbers in the range of 600 to 2100, the heat transfer of nanofluid flowing in the geometry without baffle is greater than that of water flowing through a tube with baffle, whereas the difference between these effects （nanofluid and baffle） decreases with increasing the Reynolds number. At higher Reynolds numbers （2100-3000） the baffle has a greater effect on heat transfer enhancement than the nanofluid.

关键词： CFD simulation heat transfer nanofluid,baffle single phase model multiphase model

H_∞ Consensus Control of Discrete-Time Multi-Agent Systems Under Network Imperfections and External Disturbance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2019年第3期6卷 667-675页

作者： arezou Elahi Alireza Alfi Hamidreza Modares IEEE the Faculty of Electrical and Robotic Engineering Shahrood University of Technology the Department of Mechanical Engineering at Michigan State University

This paper presents a distributed control protocol for consensus control of multi-agent systems(MASs) under external disturbances and network imperfections, including communication delay and random packet dropout. To comply with the discrete nature of networked systems, in contrast to most of the existing work for MASs under network imperfections,the agents are modeled by discrete-time dynamics. The communication network is considered to be undirected, its delay is considered to be time-varying but bounded, and its packet dropout is modeled by a Bernoulli distributed white *** conditions in terms of linear matrix inequalities(LMIs)for asymptotic mean-square consensus stability are derived under network imperfections without considering external disturbances.A desired disturbance attenuation level in the presence of both external disturbances and network imperfections is also provided.A simulation example is given to verify the effectiveness of the proposed approach in coping with network imperfection and disturbances.

关键词： Consensus distributed control H∞ control packet dropout stability time delay

Temperature effect on performance of nanoparticle/surfactant flooding in enhanced heavy oil recovery

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2019年第6期16卷 1387-1402页

作者： Sajjad Mahmoudi arezou Jafari Soheila Javadian Department of Petroleum Engineering Faculty of Chemical EngineeringTarbiat Modares UniversityTehranIran Department of Physical Chemistry Faculty of Basic ScienceTarbiat Modares UniversityP.O.Box 14115-175TehranIran

Recently,nanoparticles have been used along with surfactants for enhancing oil *** the recent studies show that oil recovery is enhanced using nanoparticle/surfactant solutions,some effective parameters and mechanisms involved in the oil recovery have not yet been ***,the temperature effect on the stability of nanoparticle/surfactant solutions and ultimate oil recovery has been studied in this work,and the optimal concentrations of both SiO2 nanoparticle and surfactant(sodium dodecyl sulfate)have been determined by the Central Composite Design *** addition,the simultaneous effects of parameters and their interactions have been *** of the stability of the injected solutions indicates that the nanoparticle concentration is the most important factor affecting the solution *** surfactant makes the solution more stable if used in appropriate concentrations below the *** to the micromodel flooding results,the most effective factor for enhancing oil recovery is temperature compared to the nanoparticle and surfactant ***,in floodings with higher porous medium temperature,the oil viscosity reduction is considerable,and more oil is *** addition,the surfactant concentration plays a more effective role in reservoirs with higher *** other words,at a surfactant concentration of 250 ppm,the ultimate oil recovery is improved about 20%with a temperature increase of 20°***,when the surfactant concentration is equal to 750 ppm,the temperature increase enhances the ultimate oil recovery by only about 7%.Finally,the nanoparticle and surfactant optimum concentrations determined by Design-Expert software were equal to 46 and 159 ppm,*** is worthy to note that obtained results are validated by the confirmation test.

关键词： Enhanced heavy oil recovery Nanoparticle Surfactant Temperature High salinity brine Stability Micromodel Experimental design

Wettability alteration analysis of smart water/novel functionalized nanocomposites for enhanced oil recovery

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2020年第5期17卷 1318-1328页

作者： Sara Habibi arezou Jafari Zahra F.akhroueian Chemical Engineering Faculty Tarbiat Modares UniversityTehranIran School of Chemical Engineering College of EngineeringInstitute of Petroleum EngineeringUniversity of TehranTehranIran

Smart water flooding,as a popular method to change the wettability of carbonate rocks,is one of the interesting and challenging issues in reservoir *** addition,the recent studies show that nanoparticles have a great potential for application in EOR ***,little research has been conducted on the use of smart water with nanoparticles in enhanced oil *** this study,stability,contact angle and IFT measurements and multi-step core flooding tests were designed to investigate the effect of the ionic composition of smart water containing SO4^2- and Ca^2+ ions in the presence of nanofluid on EOR *** amine/organosiloxane@Al2O3/SiO2(AOAS) nanocomposite previously synthesized using co-precipitation-hydrothermal method has been used ***,for the first time the application of this nanocomposite along with smart water has been studied in this *** show that by increasing the concentrations of calcium and sulfate ions in smart water,oil recovery is improved by 9% and 10%,respectively,compared to *** addition,the use of smart water and nanofluids simultaneously is very effective on increasing oil ***,the best performance was observed in smart water containing two times of sulfate ions concentration(SW2 S) with nanofluids,showing increased efficiency of about 7.5%.

关键词： Smart water Nanofluid Wettability alteration Contact angle Stability Enhanced oil recovery

Nanoparticles assisted microwave radiation:Fluid-rock interactions in oil reservoirs

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2021年第6期18卷 1797-1812页

作者： Hamzeh Shamsi Armandi arezou Jafari Reza Gharibshahi Faculty of Chemical Engineering Tarbiat Modares UniversityTehranIran

Recently,many researchers have focused on the usage of electromagnetic waves in oil production and well stimulation,but so far the effect of these waves on the fluid and rock interaction and its simultaneous effect with nanoparticles have not been ***-rock interaction is one of the most important factors affecting fluid distribution in the *** this study,the oil reservoir rock wettability alteration under electromagnetic heating and the presence of nanoparticles has been *** nanoparticles of TiO_2,Fe_(3)O_(4),and TiO_2/Fe_(3)O_(4)have been ***_2 nanoparticles are commercially available,and the other mentioned nanoparticles are synthesized via a co-precipitation *** acid has been used to modify surfaces of nanoparticles and stabilize them in water as the base ***,the adsorption of the nanoparticles on the rock surface has been *** the next step,the amount of oil outflow from the rock has been measured and reported as the external fluid *** this process,the nanoparticle performance in wettability alteration was investigated using pH and inductively coupled plasma(ICP)*** better understand the governing mechanisms,oil viscosity was measured by mixing the oil with nanoparticles and put under *** results reveal that the microwave has a great ability to reduce oil contact angle with carbonate *** the presence of0.2 wt%Fe_(3)O_(4)nanoparticles,the contact angle was reduced from 155°to 19°after 28 min of irradiation,indicating strong rock ***,microwave irradiation on Fe_(3)O_(4)nanofluid extracts75%of the oil from the *** microwave radiation,the pH of the nanofluid increases and hence,more nanoparticles are adsorbed on the rock which subsequently causes more rock *** viscosity change results prove that there is an optimal irradiation time of 5 min in which oil viscosity reduces from 481 cP to 410 cP and then increases to 827

关键词： Microwave radiation Wettability alteration Nanoparticle adsorption Rock-fluid interaction