检索结果-南通市图书馆

Reliability analysis of carbon fiber rod-reinforced umbilical cable under tension using an improved sampling method

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2769-2778页

作者： Yu zhang Hong-Yu zhang Ran Xia Si-ao Jiang Fang Wang College of Safety and Ocean Engineering China University of Petroleum China Academy of Aerospace Aerodynamics China Aerospace Science and Technology Group College of Engineering Science and Technology Shanghai Ocean University

The umbilical cable is a vital component of subsea production systems that provide power, chemical agents, control signals et al., and its requirement for reliability is exceedingly high. However, as the umbilical cable is a composite structure comprising multiple functional units, the reliability analysis of such cables involves numerous parameters that can impact calculation efficiency. In this paper, the reliability analysis of a new kind of umbilical cable with carbon fiber rod under tension is analyzed. The global dynamic analytical model is first established to determine the maximum tension load, then the local analytical model of umbilical cable including each unit are constructed by finite element method(FEM). Based on the mechanical analytical model, the reliability of umbilical cable under tension load is studied using response surface method(RSM) and Monte Carlo method. During the calculation process, a new tangent plane sampling method to calculate the response surface function(RSF) is proposed in this paper, which could make sampling points faster come close to the RSF curve, and it is proved that the calculation efficiency increases about 33% comparing with traditional method.

关键词： Umbilical cable Carbon fiber rod Failure analysis Response surface method Reliability

Therapeutic potential of targeting protein tyrosine phosphatases in liver diseases

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Pharmaceutica Sinica B 2024年第8期14卷 3295-3311页

作者： ao Wang Yi zhang Xinting Lv Guang Liang Department of Pharmacy and Institute of Inflammation Zhejiang Provincial Affiliated People’s HospitalHangzhou Medical CollegeHangzhou 310014China Key Laboratory of Natural Medicines of the Changbai Mountain Ministry of EducationYanbian UniversityYanji 133002China Chemical Biology Research Center School of Pharmaceutical SciencesWenzhou Medical UniversityWenzhou 325035China

Protein tyrosine phosphorylation is a post-translational modification that regulates protein structure to modulate demic organisms’homeostasis and *** physiological process is regulated by two enzyme families,protein tyrosine kinases(PTKs)and protein tyrosine phosphatases(PTPs).As an important regulator of protein function,PTPs are indispensable for maintaining cell intrinsic physiology in different systems,as well as liver physiological and pathological *** of PTPs has been implicated in multiple liver-related diseases,including chronic liver diseases(CLDs),hepatocellular carcinoma(HCC),and liver injury,and several PTPs are being studied as drug therapeutic ***,given the regulatory role of PTPs in diverse liver diseases,a collated review of their function and mechanism is ***,based on the current research status of targeted therapy,we emphasize the inclusion of several PTP members that are clinically significant in the development and progression of liver *** an emerging breakthrough direction in the treatment of liver diseases,this review summarizes the research status of PTP-targeting compounds in liver diseases to illustrate their potential in clinical ***,this review aims to support the development of novel PTP-based treatment pathways for liver diseases.

关键词： Tyrosine phosphorylation PTPs Signal transduction CLDs HCC Allosteric inhibitor PROTACs Drug development

Evolution hydrothermal aging resistance mechanism study of zirconium and manganese doped CeO_(2)catalysts in soot catalytic combustion based on low Miller indices crystal surface effect

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1272-1281,I0003页

作者： Zonglin Li Pan Wang Hong Ni Chengcheng ao Lidong zhang Hefeng zhang Kai Li School of Automotive and Traffic Engineering Jiangsu UniversityZhenjiang212013China State Environmental Protection Key Laboratory of Vehicle Emission Control and Simulation Chinese Research Academy of Environmental ScienceBeijing100012China National Synchrotron Radiation Laboratory University of Science and Technology of ChinaHefei230026China

The thermogravimetric analysis(TGA)experiments were carried out to reveal the mechanism of Zr and Mn doping on catalytic activity of CeO_(2)catalyst both fresh and after hydrothermal aging,and the lattice morphology and valence changes were characterized by means of Brunauer-Emmett-Teller(BET)method,X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),and H_(2)-temperature programmed reduction(H_(2)-TPR).Density functional theory(DFT)and molecular thermodynamics calculations were applied to investigate the change in catalytic activity,crystal surface energy and crystal morphology caused by hydrothermal *** maximum reaction rate temperature of fresh Mn/CeO_(2)(389℃)is similar to that of CeO_(2)(371℃)and lower than that of Zr/CeO_(2)(447℃),but the catalytic performance of CeO_(2)decreases more severely after hydrothermal *** catalyst crystals show different degrees of crystal surface migration after hydrothermal aging,which leads to the reduction of Ce^(3+)/Ce^(4+) ratio and the active sites *** calculations indicate that the doping of Zr and Mn reduces the surface energy of the low Miller indices surface and increases the oxygen vacancy formation energy,leading to better thermal stability and lower catalytic *** Zr and Mn doping also changes the adsorption energy and Gibbs free energy of H_(2)O,which dominates the migration of(111)to(110)and(100)in the vapor *** crystal surface migration mechanism of CeO_(2)catalysts doped with Zr and Mn induced by H_(2)O molecules at high temperature obtained in this study can provide a valuable addition to the regeneration of CeO_(2)catalysts in the after-treatment systems of diesel engines.

关键词： Soot CeO_(2)-based catalyst CDPF Rare earth metal oxides DFT calculations

In situ embedded bismuth nanoparticles among highly porous carbon fibers for efficient carbon dioxide reduction

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4312-4320页

作者： Wei-Jian Guo ao Zhou Wen-Wen Cai Jin-Tao zhang Key Laboratory for Colloid and Interface Chemistry(Ministry of Education) School of Chemistry and Chemical EngineeringShandong UniversityJinan 250100China

Electrocatalysis provides an optimal approach for the conversion of carbon dioxide(CO_(2))into high-value chemicals,thereby presenting a promising avenue toward achieve carbon ***,addressing the selectivity and stability challenges of metal catalysts in electrolytic reduction remains a daunting *** this study,the electrospinning method is employed to fabricate porous carbon nanofibers loaded with bismuth nanoparticles with the help of in situ *** porous carbon nanofibers as conductive support would facilitate the dispersion of bismuth active sites while inhibiting their aggregation and promoting the mass transfer,thus enhancing their electrocatalytic activity and ***,nitrogen doping induces electron delocalization in bismuth atoms through metal-support interactions,thus enabling efficient adsorption of intermediates for improving selectivity based on the theoretical ***,Bi@PCNF-500 exhibits the exceptional selectivity and stability across a wide range of potential ***,its faradaic efficiency(FE)of formate reaches 92.7%in H-cell and94.9%in flow cell,respectively,with good electrocatalytic *** in situ characterization and theoretical calculations elucidate the plausible reaction mechanism to obtain basic rules for designing efficient electrocatalyst.

关键词： Porous carbon nanofiber N-doping Electron delocalization Carbon dioxide reduction

Fabrication and properties of lightweight zirconia with fine closed porosity

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1449-1458页

作者： Yi-bo zhang Hua-zhi Gu Lv-ping Fu ao Huang Mei-je zhang The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

Lightweight refractory materials with thermal insulation properties and erosion resistance are advantageous for hightemperature *** zirconia refractories were prepared using starch as a pore-forming agent,basic magnesium carbonate as a stabilizer,and nano-zirconia as an *** effects of the nano-zirconia content on the pore and thermal insulation properties of the lightweight zirconia refractories were investigated based on the porosity,phase composition,microstructure,and thermal ***-zirconia was shown to have a high surface energy,and its addition effectively increased the driving force for sintering,reduced the sintering temperature,and promoted the sintering reaction,thereby reducing the apparent porosity and improving the density of the prepared *** to the superplasticity of nano-zirconia,the surface stress caused plastic deformation between particles,which increased the migration rate of grain boundaries and trapped more gas inside the material before it diffused to the surface,thereby enhancing the closed porosity of the *** presence of closed pores could extend the thermal conduction path,decrease the conduction rate,and hinder the conduction effect to effectively reduce the thermal conductivity of the *** a nano-zirconia content of 0.75 wt.%,the prepared lightweight zirconia had the highest closed porosity and the lowest thermal *** apparent porosity,closed porosity,and total porosity of the material were 2.8%,7.0%,and 9.8%,respectively,and the thermal conductivity at 800℃was 1.37 W m^(-1)k^(-1).

关键词： Sintering Nano-zirconia Closed pore:Thermal conductivity Refractory material

Using Longitudinal Fins to Improve the Melting Performance of Stearic Acid in Thermal Energy Storage Devices

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第5期33卷 1672-1687页

作者： YAN Suying LIU Yiran ao Ci ZHao Xiaoyan zhang Na zhang Ruiying AHMADI Mohammad Hossein School of Energy and Power Engineering Inner Mongolia University of TechnologyHohhot 010051China Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100190China School of Materials Science and Engineering Inner Mongolia University of TechnologyHohhot 010051China Faculty of Mechanical Engineering Shahrood University of TechnologyShahroodIran

The heat transfer efficiency of a thermal energy storage unit(TESU)can be improved by the addition of novel longitudinal fins.A series of TESUs are analyzed using the finite volume method(FVM)to determine the effect of fin angle on the heat transfer *** the fin angle increases,the TES rate first increases,then decreases,reaching a maximum rate at 60°,where the melting time is less by 30.9%,28.58%,21.99%,9.02%,and 18.1%than at 0°,15°,30°,45°,and 80°,*** addition,it is found that the melting time of the phase change material is significantly greater at the bottom of the *** time percentage of this stage decreases as the fin angle increases through these percentages by 7%,14%,23%,33%,and 20%,***,the response surface methodology(RSM)is applied to optimize the longitudinal fin by minimizing the total melting *** analysis concludes that a fin angle of 58.68°reduces the complete melting time of the stearic acid by 44%below the time at 0°.These findings fill a gap in knowledge of the effect on melting performance of the design angle of longitudinal fins and provide a reference for the design of horizontally placed longitudinal finned thermal energy storage units.

关键词： thermal energy storage melting rate enhancement longitudinal fins fin angle phase change materials

Multi-blade rubbing characteristics of the shaft-disk-blade-casing system with large rotation

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 111-136页

作者： Zhiyuan WU Linchuan ZHao Han YAN Ge YAN ao CHEN Wenming zhang State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong UniversityShanghai 200240China Shanghai Institute of Aerospace Systems Engineering Shanghai 201108China

Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the blade, while some only consider the whirl of the rotor, neglecting its spin. To address these limitations, this paper proposes a dynamic model with large rotation for the SDBC system. The model incorporates the spin and whirl of the rotor, enabling the realistic reproduction of multiblade rubbing faults. To verify the accuracy of the SDBC model with large rotation and demonstrate its capability to effectively consider the rotational effects such as the centrifugal stiffening and gyroscopic effects, the natural characteristics and dynamic responses of the proposed model are compared with those obtained from reported research and experimental results. Furthermore, the effects of the rotating speed, contact stiffness,and blade number on the dynamic characteristics of the SDBC system with multi-blade rubbing are investigated. The results indicate that the phase angle between the rotor deflection and the unbalance excitation force increases with the increasing rotating speed,which significantly influences the rubbing penetration of each blade. The natural frequency of the SDBC system with rubbing constrain can be observed in the acceleration response of the casing and the torsional response of the shaft, and the frequency is related to the contact stiffness. Moreover, the vibration amplitude increases significantly with the product of the blade number under rubbing, and the rotating frequency approaches the natural frequency of the SDBC system. The proposed model can provide valuable insight for the fault diagnosis of rubbing in bladed rotating machinery.

关键词： shaft-disk-blade-casing(SDBC) large rotation spin and whirl multi-blade rubbing rotational effect

An adaptive machine learning-based optimization method in the aerodynamic analysis of a finite wing under various cruise conditions

在线全文

学校读者我要写书评

暂无评论

Theoretical & Applied Mechanics Letters 2024年第1期14卷 27-34页

作者： Zilan zhang Yu ao Shaofan Li Grace X.Gu Department of Mechanical Engineering University of CaliforniaBerkeley 94720USA Department of Engineering Peking UniversityBeijing 100871China Department of Civil and Environmental Engineering University of CaliforniaBerkeley 94720USA

Conventional wing aerodynamic optimization processes can be time-consuming and imprecise due to the complexity of versatile flight *** of existing literature has considered two-dimensional infinite airfoil optimization,while three-dimensional finite wing optimizations are subject to limited study because of high computational *** we create an adaptive optimization methodology built upon digitized wing shape deformation and deep learning algorithms,which enable the rapid formulation of finite wing designs for specific aerodynamic performance demands under different cruise *** methodology unfolds in three stages:radial basis function interpolated wing generation,collection of inputs from computational fluid dynamics simulations,and deep neural network that constructs the surrogate model for the optimal wing *** has been demonstrated that the proposed methodology can significantly reduce the computational cost of numerical *** also has the potential to optimize various aerial vehicles undergoing different mission environments,loading conditions,and safety requirements.

关键词： Aerodynamic optimization Computational fluid dynamics Radial basis function Finite wing Deep learning neural network

Europium-bearing organic framework with excellent X-ray scintillating luminescence

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 251-255,I0001页

作者： Yugang zhang Lanhua Chen Xia Wang Wei Liu Shu'ao Wang State Key Laboratory of Radiation Medicine and Protection School for Radiological and Interdisciplinary Sciences(RAD-X)and Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education InstitutionsSoochow UniversitySuzhou215123China School of Environmental and Materials Engineering Yantai UniversityYantai264005China

Two europium-bearing organic frameworks,termed as EuTPO-1 and EuTPO-2(H_(3)TPO=tris(4-carboxylphenyI)-phosphineoxide),are reported in this work.A series of characterizations of EuTPO-1and EuTPO-2,such as X-ray crystallography and photoluminescence spectroscopy,was performed to expatiate their structure and physicochemical *** of them are constructed by dimers of the europium-oxygen subunit of [Eu_(2)O_(16)] and TPO *** from high X-ray stopping attenuation and excellent luminescence efficiency,they emit sufficient luminescence when irradiated with ***,they possess stable light outputs when exposed to high humidities and strong radiation dose,outperforming the commercial scintillator CsI:*** result paves the way for developing new scintillator and enriches the compound of europium-bearing organic framework with X-ray scintillating luminescence.

关键词： Metal-organic frameworks Scintillating material Luminescence efficiency Rare earths