检索结果-南通市图书馆

Predictive model for non-malignant portal vein thrombosis associated with cirrhosis based on inflammatory biomarkers

引用

World Journal of Gastrointestinal Oncology 2024年第4期16卷 1213-1226页

作者： Guo-le Nie Jun Yan Ying Li Hong-long Zhang Dan-Na Xie Xing-Wang Zhu Xun Li The First School of Clinical Medicine Lanzhou UniversityLanzhou 730000Gansu ProvinceChina Department of General Surgery The First Hospital of Lanzhou UniversityLanzhou 730000Gansu ProvinceChina

BACKGROUND Portal vein thrombosis(PVT),a complication of liver cirrhosis,is a major public health *** prediction is the most effective method for PVT diagnosis and *** To develop and validate a nomogram and network calculator based on clinical indicators to predict PVT in patients with *** Patients with cirrhosis hospitalized between January 2016 and December 2021 at the First Hospital of Lanzhou University were screened and 643 patients with cirrhosis who met the eligibility criteria were *** a 1:1 propensity score matching 572 patients with cirrhosis were screened,and relevant clinical data were *** risk factors were identified using the least absolute shrinkage and selection operator(LASSO)and multivariate logistic regression *** inflation factors and correlation matrix plots were used to analyze multicollinearity among the variables.A nomogram was constructed to predict the probability of PVT based on independent risk factors for PVT,and its predictive performance was verified using a receiver operating characteristic curve(ROC),calibration curves,and decision curve analysis(DCA).Finally,a network calculator was constructed based on the *** This study enrolled 286 cirrhosis patients with PVT and 286 without *** analysis revealed 13 variables as strongly associated with PVT *** logistic regression analysis revealed nine indicators as independent PVT risk factors,including etiology,ascites,gastroesophageal varices,platelet count,D-dimer,portal vein diameter,portal vein velocity,aspartate transaminase to neutrophil ratio index,and platelet-to-lymphocyte *** and correlation matrix plot results revealed no significant multicollinearity or correlation among the variables.A nomogram was constructed based on the screened independent risk *** nomogram had excellent predictive performance,with an area under the ROC curve of 0.821 and 0.829 in the

关键词： Portal vein thrombosis Liver cirrhosis Nomogram Inflammatory markers Aspartate aminotransferase to neutrophil ratio index Platelet-to-lymphocyte ratio

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photocatalytic activation of sulfite by N-doped porous biochar/MnFe_(2)O_(4) interface-driven catalyst for efficient degradation of tetracycline

引用

Green Energy & Environment 2024年第3期9卷 481-494页

作者： long Cheng Yuanhui Ji Jiangsu Province Hi-Tech Key Laboratory for Biomedical Research School of Chemistry and Chemical EngineeringSoutheast UniversityNanjing211189China

A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline(TC).As the carrier of MnFe_(2)O_(4),NBCs were synthesized from alfalfa,which has large specific surface area,graphite like structure and hierarchical porous *** adsorption isotherm indicated that NBCs/MnFe_(2)O_(4)-2:1 had the best adsorption performance for TC(347.56 mg g^(-1)).Through synergistic adsorption and photocatalysis,the removal rate of TC reached 84%,which was significantly higher than that of MnFe_(2)O_(4).Electrochemical impedance spectroscopy(EIS)and Photoluminescence(PL)characterization results showed that the introduction of NBCs improved the separation efficiency of photogenerated electron and hole pairs and enhanced the photocatalytic ***,the adsorption,degradation mechanism and degradation path of TC by the catalyst were systematically analyzed by coupling HPLC–MS measurement with the theoretical *** the advantages of excellent degradation performance,low cost,easy separation and environmental friendliness of NBCs/MnFe_(2)O_(4),this work was expected to provide a new path for the practical application of biochar.

关键词： Biochar MnFe_(2)O_(4) Sulfite Adsorption Photocatalysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms

引用

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 337-350页

作者： Jingou Kuang Zhilin long School of Civil Engineering Xiangtan UniversityXiangtan 411105China

This work constructed a machine learning(ML)model to predict the atmospheric corrosion rate of low-alloy steels(LAS).The material properties of LAS,environmental factors,and exposure time were used as the input,while the corrosion rate as the output.6 dif-ferent ML algorithms were used to construct the proposed *** optimization and filtering,the eXtreme gradient boosting(XG-Boost)model exhibited good corrosion rate prediction *** features of material properties were then transformed into atomic and physical features using the proposed property transformation approach,and the dominant descriptors that affected the corrosion rate were filtered using the recursive feature elimination(RFE)as well as XGBoost *** established ML models exhibited better predic-tion performance and generalization ability via property transformation *** addition,the SHapley additive exPlanations(SHAP)method was applied to analyze the relationship between the descriptors and corrosion *** results showed that the property transformation model could effectively help with analyzing the corrosion behavior,thereby significantly improving the generalization ability of corrosion rate prediction models.

关键词： machine learning low-alloy steel atmospheric corrosion prediction corrosion rate feature fusion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Honeycomb-like MoCo alloy on 3D nitrogen-doped porous graphene for efficient hydrogen evolution reaction

引用

Rare Metals 2024年第3期43卷 1072-1082页

作者： Lin-Ping Wang Kuang Li Hua-long Ding le Xu Chen Huang Jiao-Jiao Zhou Cong-TaoWen Pei-Lin Zhang Wei-Wei Wang Lu-Yang Chen Key Laboratory for Ultrafine Materials of Ministry of Education School of Materials Science and EngineeringEast China University of Science and TechnologyShanghai200237China State Key Laboratory of High-Performance Ceramics and Superfine Microstructure Shanghai Institute of Ceramics Chinese Academy of SciencesShanghai200050China State Key Laboratory of Chemical Engineering and School of Chemistry and Molecular Engineering East China University of Science and TechnologyShanghai200237China

An efficient electrocatalyst is indispensable to significantly reduce energy consumption and accelerate the conversion efficiency of water *** this work,the honeycomb-like porous MoCo alloy on nitrogen-doped three-dimensional(3D)porous graphene substrate(Mo_(0.3)Co_(0.7)@NPG)has been synthesized from the annealing of layered double hydroxide(MoCo-LDH@NPG).Especially,the Mo_(0.3)Co_(0.7)@NPG exhibits low hydrogen evolution overpotential of 75 mV(10 mA·cm^(-2))and a Tafel slope of 69.9 mV·dec^(-1),which can be attributed to highly conductive NPG substrate,the unique nanostructure and the synergistic effect of Mo and ***,the Mo_(0.3)Co_(0.7)@NPG can maintain the original morphology and high catalytic activity after 50-h stability *** work proposes a general strategy to synthesize a multi-element alloy on conductive substrates with high porosity for electrocatalytic reaction.

关键词： MoCo alloy Three-dimensional nitrogen-doped porous graphene Hydrogen evolution reaction(HER)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Frequency Domain Fatigue Evaluation on SCR Girth-Weld Based on Structural Stress

引用

China Ocean Engineering 2024年第2期38卷 255-270页

作者： ZHANG long ZHAO Tian-feng College of Safety and Ocean Engineering China University of Petroleum(Beijing)Beijing 102249China

The Steel Catenary Riser(SCR)is a vital component for transporting oil and gas from the seabed to the floating *** harsh environmental conditions and complex platform motion make the SCR’s girth-weld prone to fatigue *** structural stress fatigue theory and Master S-N curve method provide accurate predictions for the fatigue damage on the welded joints,which demonstrate significant potential and compatibility in multi-axial and random fatigue ***,we propose a new frequency fatigue model subjected to welded joints of SCR under multiaxial stress,which fully integrates the mesh-insensitive structural stress and frequency domain random process and transforms the conventional welding fatigue technique of SCR into a spectrum analysis technique utilizing structural ***,a full-scale FE model of SCR with welds is established to obtain the modal structural stress of the girth weld and the frequency response function(FRF)of modal coordinate,and a biaxial fatigue evaluation about the girth weld of the SCR can be achieved by taking the effects of multi-load correlation and pipe-soil interaction into *** research results indicate that the frequency-domain fatigue results are aligned with the time-domain results,meeting the fatigue evaluation requirements of the SCR.

关键词： SCR girth weld random vibration self(cross)power spectrum structural stress method biaxial fatigue damage

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Designing Proportional-Integral Consensus Protocols for Second-Order Multi-Agent Systems Using Delayed and Memorized State Information

引用

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 878-892页

作者： Honghai Wang Qing-long Han the College of Information Science and Engineering State Key Laboratory of Synthetical Automation for Process IndustriesNortheastern UniversityShenyang 110819China the School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourneVIC 3122Australia

This paper is concerned with consensus of a secondorder linear time-invariant multi-agent system in the situation that there exists a communication delay among the agents in the network.A proportional-integral consensus protocol is designed by using delayed and memorized state *** the proportional-integral consensus protocol,the consensus problem of the multi-agent system is transformed into the problem of asymptotic stability of the corresponding linear time-invariant time-delay *** that the location of the eigenvalues of the corresponding characteristic function of the linear time-invariant time-delay system not only determines the stability of the system,but also plays a critical role in the dynamic performance of the *** this paper,based on recent results on the distribution of roots of quasi-polynomials,several necessary conditions for Hurwitz stability for a class of quasi-polynomials are first *** allowable regions of consensus protocol parameters are *** necessary and sufficient conditions for determining effective protocol parameters are *** designed protocol can achieve consensus and improve the dynamic performance of the second-order multi-agent ***,the effects of delays on consensus of systems of harmonic oscillators/double integrators under proportional-integral consensus protocols are ***,some results on proportional-integral consensus are derived for a class of high-order linear time-invariant multi-agent systems.

关键词： Consensus protocol Hurwitz stability multi-agent systems quasi-polynomials time delay

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Automatic modeling algorithm of stochastic error for inertial sensors

引用

Control Theory and Technology 2024年第1期22卷 81-91页

作者： Luodi Zhao long Zhao School of Automation Science and Electrical Engineering Beihang UniversityBeijing100191China Digital Navigation Center Beihang UniversityBeijing100191China Science and Technology on Aircraft Control Laboratory Beihang UniversityBeijing100191China

This paper proposes an automatic algorithm to determine the properties of stochastic processes and their parameters for inertial error. The proposed approach is based on a recently developed method called the generalized method of wavelet moments (GMWM), whose estimator was proven to be consistent and asymptotically normally distributed. This algorithm is suitable mainly (but not only) for the combination of several stochastic processes, where the model identification and parameter estimation are quite difficult for the traditional methods, such as the Allan variance and the power spectral density analysis. This algorithm further explores the complete stochastic error models and the candidate model ranking criterion to realize automatic model identification and determination. The best model is selected by making the trade-off between the model accuracy and the model complexity. The validation of this approach is verified by practical examples of model selection for MEMS-IMUs (micro-electro-mechanical system inertial measurement units) in varying dynamic conditions.

关键词： GMWM Stochastic process Inertial sensor Sensor calibration Error model Allan variance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

One bird,multiple stones:The race to find a gene of dominant negative effect in wheat

引用

The Crop Journal 2024年第4期12卷 951-952页

作者： long Mao State Key Laboratory of Crop Gene Resources and Breeding Institute of Crop SciencesChinese Academy of Agricultural SciencesBeijing 100081China

In the current issue of The Crop Journal,Chen et al.[1]reports map-based cloning of a wheat gene that showed temperaturedependent pleiotropic effects on multiple traits including plant height,leaf shape,spike and grain morphology,and accordingly was named WPA1 for Wheat Plant Architecture *** mutant was first observed among EMS-treated plants and repeatedly appeared in multiple occasions.

关键词： Wheat bird repeatedly

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Jetting-based bioprinting:process,dispense physics,and applications

引用

Bio-Design and Manufacturing 2024年第5期7卷 771-799页

作者： Wei long Ng Viktor Shkolnikov Singapore Centre for 3D Printing(SC3DP) School of Mechanical and Aerospace EngineeringNanyang Technological University(NTU)Singapore 639798Singapore HP Inc. Palo AltoCA 94304USA

Jetting-based bioprinting facilitates contactless drop-on-demand deposition of subnanoliter droplets at well-defined positions to control the spatial arrangement of cells,growth factors,drugs,and biomaterials in a highly automated layer-by-layer fabrication *** to its immense versatility,jetting-based bioprinting has been used for various applications,including tissue engineering and regenerative medicine,wound healing,and drug development.A lack of in-depth understanding exists in the processes that occur during jetting-based *** review paper will comprehensively discuss the physical considerations for bioinks and printing conditions used in jetting-based *** first present an overview of different jetting-based bioprinting techniques such as inkjet bioprinting,laser-induced forward transfer bioprinting,electrohydrodynamic jet bioprinting,acoustic bioprinting and microvalve ***,we provide an in-depth discussion of various considerations for bioink formulation relating to cell deposition,print chamber design,droplet formation and droplet ***,we highlight recent accomplishments in jetting-based *** present the advantages and challenges of each method,discuss considerations relating to cell viability and protein stability,and conclude by providing insights into future directions of jetting-based bioprinting.

关键词： 3D bioprinting Biofabrication Jetting-based Dispense physics Machine learning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis of hierarchically porous carbon materials by zinc salts-assisted carbonization of biomass and organic solid wastes

引用

Particuology 2024年第1期84卷 45-52页

作者： le-le Zhang lei Tong Yanwei Ding Wanqun Zhang Hai-Wei Liang Hefei National Research Center for Physical Sciences at the Microscale Department of ChemistryUniversity of Science and Technology of ChinaHefei230026China

Hierarchically porous carbons(HPCs)with multimodal pores have attracted considerable attention due to their unique physical and chemical properties and various application potentials in heterogeneous catalysis,environmental treatment,and energy storage and ***,we report a general and simple zinc salts-assisted method for the synthesis of HPCs with varied porosity and chemical func-tionalities by the direct carbonization of diverse biomass and *** the carbonization,zinc salts are thermally decomposed into nanoparticles that serve as in-situ templates to introduce nanopores in *** prepared HPCs exhibit high specific surface areas(up to 2432 m2 g-1),large pore volumes(up to 4.30 cm^(3)g^(-1)),and broad pore size ***,the zinc salts can be recovered and recycled,supporting the sustainable production of HPCs on large *** prepared HPCs-supported catalysts with atomically dispersed metal sites exhibit promising electrocatalytic performance for the oxygen reduction reaction.

关键词： Hierarchical porous carbon Zinc salts Biomass Wastes Electrocatalysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：