检索结果-南通市图书馆

Comparison of extraction abilities of deep eutectic solvents and aqueous acid solutions for extraction of rare earths and transition metals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1157-1164,I0006页

作者： Svetlana Drogobuzhskaya Margarita Frolova andrey Shishov Nikita Tsvetov Tananaev Institute of Chemistry-Subdivision of the Federal Research Centre《kola Science Centre of the Russian Academy of Sciences》 18420926a AcademgorodokApatityRussia Murmansk State Technical University 183010Sportivnaja str.13MurmanskRussia Department of Analytical Chemistry Institute of ChemistrySaint Petersburg State UniversitySpbSU.1990347/9 Universitetskaya embSt.Petersburg Russia

In recent years,deep eutectic solvents have attracted increasing interest as effective extractants for the separation of both organic substances and metals from various ***-based deep eutectic solvents are most often used as extractants for the extraction of *** this work,for the first time,the extraction efficiency of transition metals and rare earth elements(Y,Zr,Nb,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu,Hf and Ta)from mining tailings and Na,k,Ca,Mg,Cu,Fe,Mn,Pb,Ba,Ni and Sr from biodiesel samples using acidic deep eutectic solvents and saturated aqueous solutions of the same acids(malonic,malic,tartaric and citric)is *** this,deep eutectic solvents based on acids and their aqueous saturated solutions were prepared and *** prepared mixtures were analyzed by IR spectroscopy to confirm the formation of eutectic *** such as the density and viscosity of the resulting mixtures were also investigated,as this can be of key importance for the efficiency of metal *** extraction of rare earth metals from mining tailings took a long time(up to several days),while the extraction of metals from fuel took no more than 30 *** emission spectral methods were used as an analysis *** is shown that the extraction efficiency with aqueous solutions is better than that with eutectic solvents,which casts doubt on the need for deep eutectic solvents use in this area.

关键词： Deepeutectic solvent Metal separation Elemental analysis Rare earth metals Biodiesel

Spark Plasma Sintering of Boron Carbide Using Ti_(3)SiC_(2) as a Sintering Additive

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 645-650页

作者： Hülya Biçer Mustafa Tuncer Hasan Göçmez Iurii Bogomol Valerii kolesnichenko andrey Ragulya kutahya Dumlupinar University School of EngineeringDepartment of Metallurgical and Materials EngineeringKütahya 43100Tur-key Boron Based Advanced Ceramics Application and Research Center Kütahya Dumlupınar UniversityKütahya 43100Turkey Advanced Technologies Center(İLTEM) Kütahya Dumlupınar UniversityKütahya 43000Turkey Department of High-Temperature Ma-terials and Powder Metallurgy National Technical University of Ukraine“Igor Sikorsky Kyiv Polytechnic Institute”Kyiv 03056Ukraine Frantsevich Institute for Problems of Materials Science National Academy of Sciences of UkraineKyiv 03056Ukraine

Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its *** approach to overcome this limitation is the addition of secondary phases into boron *** carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering *** present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and *** results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher ***,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.

关键词： reactive sintering SPS boron carbide MAX phase

Enhancing crystal integrity and structural rigidity of CsPbBr_(3) nanoplatelets to achieve a narrow colorsaturated blue emission

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第5期13卷 985-997页

作者： Qianqian Huang Wenxu Yin Bo Gao Qingsen Zeng Dong Yao Hao Zhang Yinghe Zhao Weijia Zheng Jiaqi Zhang Xuyong Yang Xiaoyu Zhang andrey L.Rogach key Laboratory of Automobile Materials MOE School of Materials Science&Engineeringand Jilin Provincial International Cooperation Key Laboratory of High-Efficiency Clean Energy MaterialsJilin UniversityChangchunChina. State key Laboratory of Supramolecular Structure and Materials College of ChemistryJilin UniversityChangchunChina. State key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhanHubeiChina. Department of Chemistry University of VictoriaVictoriaBCCanada. key Laboratory of Advanced Display and System Applications of Ministry of Education Shanghai UniversityShanghaiChina. Department of Materials Science and Engineering and Centre for Functional Photonics(CFP)City University of Hong KongHong Kong S.A.RChina

Quantum-confined CsPbBr_(3) perovskites are promising blue emitters for ultra-high-definition displays,but their soft lattice caused by highly ionic nature has a limited ***,we endow CsPbBr_(3) nanoplatelets(NPLs)with atomic crystal-like structural rigidity through proper surface engineering,by using strongly bound N-dodecylbenzene sulfonic acid(DBSA).A stable,rigid crystal structure,as well as uniform,orderly-arranged surface of these NPLs is achieved by optimizing intermediate reaction stage,by switching from molecular clusters to mono-octahedra,while interaction with DBSA resulted in formation of a Cs_(x)O monolayer shell capping the NPL *** a result,both structural and optical stability of the CsPbBr3 NPLs is enhanced by strong covalent bonding of DBSA,which inhibits undesired phase transitions and decomposition of the perovskite phase potentially caused by ligand ***,rather small amount of DBSA ligands at the NPL surface results in a short inter-NPL spacing in their closely-packed films,which facilitates efficient charge injection and *** photoluminescence of the produced CsPbBr_(3) NPLs is bright(nearly unity emission quantum yield)and peaks at 457 nm with an extremely narrow bandwidth of 3.7 nm at 80 k,while the bandwidth of the electroluminescence(peaked at 460 nm)also reaches a record-narrow value of 15 nm at room *** value corresponds to the CIE coordinates of(0.141,0.062),which meets Rec.2020 standards for ultra-high-definition displays.

关键词： temperature stability narrow

Aqueous-phase reforming of hydroxyacetone solution to bio-based H_(2)over supported Pt catalysts

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第4期9卷 777-788页

作者： A.k.k.Vikla k.koichumanova Songbo He k.Seshan Joint International Research Laboratory of Circular Carbon Nanjing Tech UniversityNanjing211816China Faculty of Science and Technology University of Twente7500 AE EnschedeThe Netherlands CoRe Pro 9723 BL GroningenThe Netherlands

Aqueous-phase reforming(APR)is an attractive process to produce bio-based hydrogen from waste biomass streams,during which the catalyst stability is often challenged due to the harsh reaction *** this work,three Pt-based catalysts supported on C,AlO(OH),and ZrO_(2)were investigated for the APR of hydroxyacetone solution in afixed bed reactor at 225℃and 35 *** them,the Pt/C catalyst showed the highest turnover frequency for H_(2)production(TOF of 8.9 molH_(2)molPt^(-1)min^(-1))and the longest catalyst *** the AlO(OH)and ZrO_(2)supported Pt catalysts,the side reactions consuming H_(2),formation of coke,and Pt sintering result in a low H_(2)production and the fast catalyst *** proposed reaction pathways suggest that a promising APR catalyst should reform all oxygenates in the aqueous phase,minimize the hydrogenation of the oxygenates,maximize the WGS reaction,and inhibit the condensation and coking reactions for maximizing the hydrogen yield and a stable catalytic performance.

关键词： APR Hydroxyacetone TOF Bio-based H_(2) Support effect

Direct scaling of residual displacements for bilinear and pinching oscillators

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 129-149页

作者： Mohammad Saifullah Vinay k.Gupta Department of Civil Engineering Indian Institute of Technology KanpurKanpur 208016India

The estimation of residual displacements in a structure due to an anticipated earthquake event has increasingly become an important component of performance-based earthquake engineering because controlling these displacements plays an important role in ensuring cost-feasible or cost-effective repairs in a damaged structure after the *** attempt is made in this study to obtain statistical estimates of constant-ductility residual displacement spectra for bilinear and pinching oscillators with 5%initial damping,directly in terms of easily available seismological,site,and model *** of the available models for the bilinear and pinching oscillators are useful when design spectra for a seismic hazard at a site are not *** statistical estimates of a residual displacement spectrum are proposed in terms of earthquake magnitude,epicentral distance,site geology parameter,and three model parameters for a given set of ductility demand and a hysteretic energy capacity coefficient in the case of bilinear and pinching models,as well as for a given set of pinching parameters for displacement and strength at the breakpoint in the case of pinching model *** proposed scaling model is applicable to horizontal ground motions in the western *** earthquake magnitudes less than 7 or epicentral distances greater than 20 km.

关键词： residual displacement spectrum bilinear hysteresis model pinching hysteresis model nonlinear analysis scaling model

Analysis of the Oscillatory Flows of Multiple Shock Waves in a Constant Area Duct

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 794-806页

作者： k JAMES Jintu kIM Heuy Dong Department of Mechanical Engineering Andong National UniversityAndong36729Republic of Korea CAD-IT korea Co. Ltd.Seoul08591Republic of Korea

The oscillatory response of multiple shock waves to downstream perturbations in a supersonic flow is studied numerically in a rectangular *** shock waves are formed inside the duct at a shock Mach number of *** duct has an exit height of H,and the effect of duct resonance on multiple shock oscillations is investigated by attaching exit ducts of lengths 0H,50H,and *** downstream disturbance frequency varied from 10 Hz to 200 Hz to explore the oscillation characteristics of the multiple shock *** oscillatory response of shock waves under self-excited and forced oscillation conditions are analyzed in terms of wall static pressure,shock train leading-edge location,shock train length,and the size of the separation *** extent of the initial shock location increases with an increase in exit duct length for the self-excited oscillation *** analysis of the shock train leading edge and the spectral analysis of wall static pressure variations are *** variation in the shock train length is analyzed using the pressure ratio method for self-excited as well as forced *** RMS amplitude of the normalized shock train length(ζ_(ST))increases with an increase in the exit duct length for the self-excited oscillation *** the downstream perturbation frequency is increased,ζ_(ST)is decreased for exit duct *** all exit duct designs and downstream forcing frequencies,the size of the separation bubble grows and shrinks during the shock oscillations,demonstrating the dependence on duct resonance and forced oscillations.

关键词： shock train downstream disturbance supersonic flow shock wave boundary layer interaction duct resonance flow separation

Impact of Fin Arrangement on Heat Transfer and Melting Characteristics of Phase Change Material

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 435-456页

作者： Arun UNIYAL Yogesh k.PRAJAPATI Department of Mechanical Engineering National Institute of Technology UttarakhandSrinagar(Garhwal)246174India Department of Mechanical Engineering BIT SindriDhanbadJharkhand828123India

Present work investigates the heat transfer and melting behaviour of phase change material(PCM) in six enclosures(enclosure-1 to 6) filled with paraffin *** enclosures are equipped with distinct arrangements of the fins while keeping the fin's surface area equal in each *** analysis has been presented to recognize the suitable fin arrangements that facilitate improved heat transfer and melting rate of the *** wall of the enclosure is maintained isothermal for the temperature values 335 k,350 k and 365 *** length of the enclosure including fins is ranging between 0 and *** have been illustrated through the estimation of important performance parameters such as energy absorbing capacity,melting rate,enhancement ratio,and Nusselt *** has been found that melting time(to melt 100% of the PCM) is 60.5%less in enclosure-2(with two fins of equal length) as compared to the enclosure-1,having no *** the fin surface area equal,if the longer fin is placed below the shorter fin(enclosure-3),melting time is further decreased by 14.1% as compared to ***,among all the configurations,enclosure-6 with wire-mesh fin structure exhibits minimum melting time which is 68.4% less as compared to the *** on the findings,it may be concluded that fins are the main driving agent in the enclosure to transfer the heat from heated wall to the *** design and positioning of the fins improve the heat transfer rate followed by melting of the PCM in the entire area of the *** of the favourable vortices and natural convection current in the enclosure accelerate the melting phenomenon and help to reduce charging time.

关键词： phase change material enclosure fin melting fraction energy storage heat transfer

Radiative heat transfer analysis of a concave porous fin under the local thermal non-equilibrium condition:application of the clique polynomial method and physics-informed neural networks

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第9期45卷 1613-1632页

作者： k.CHANDAN k.kARTHIk k.V.NAGARAJA B.C.PRASANNAkUMARA R.S.VARUN kUMAR T.MUHAMMAD Amrita School of Artificial Intelligence Amrita Vishwa VidyapeethamBengaluru 560035KarnatakaIndia Department of Studies in Mathematics Davangere UniversityDavangere 577002KarnatakaIndia Computational Science Lab Amrita School of EngineeringAmrita Vishwa VidyapeethamBengaluru 560035KarnatakaIndia Department of Pure and Applied Mathematics School of Mathematical SciencesSunway UniversityPetaling Jaya 47500Malaysia Department of Mathematics College of ScienceKing Khalid UniversityAbha 61413Saudi Arabia

The heat transfer through a concave permeable fin is analyzed by the local thermal non-equilibrium(LTNE)*** governing dimensional temperature equations for the solid and fluid phases of the porous extended surface are modeled,and then are nondimensionalized by suitable dimensionless ***,the obtained nondimensional equations are solved by the clique polynomial method(CPM).The effects of several dimensionless parameters on the fin's thermal profiles are shown by graphical ***,the current study implements deep neural structures to solve physics-governed coupled equations,and the best-suited hyperparameters are attained by comparison with various network *** results of the CPM and physicsinformed neural network(PINN)exhibit good agreement,signifying that both methods effectively solve the thermal modeling problem.

关键词： heat transfer fin porous fin local thermal non-equilibrium(LTNE)model physics-informed neural network(PINN)

MDCN:Modified Dense Convolution Network Based Disease Classification in Mango Leaves

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第2期78卷 2511-2533页

作者： Chirag Chandrashekar k.P.Vijayakumar k.Pradeep A.Balasundaram School of Computer Science and Engineering Vellore Institute of Technology(VIT)ChennaiIndia Center for Cyber Physical Systems School of Computer Science and EngineeringVellore Institute of Technology(VIT)ChennaiIndia

The most widely farmed fruit in the world is *** the production and quality of the mangoes are hampered by many *** diseases need to be effectively controlled and ***,a quick and accurate diagnosis of the disorders is *** convolutional neural networks,renowned for their independence in feature extraction,have established their value in numerous detection and classification ***,it requires large training datasets and several parameters that need careful *** proposed Modified Dense Convolutional Network(MDCN)provides a successful classification scheme for plant diseases affecting mango *** model employs the strength of pre-trained networks and modifies them for the particular context of mango leaf diseases by incorporating transfer learning *** data loader also builds mini-batches for training the models to reduce training ***,optimization approaches help increase the overall model’s efficiency and lower computing *** employed on the MangoLeafBD Dataset consists of a total of 4,000 *** the experimental results,the proposed system is compared with existing techniques and it is clear that the proposed algorithm surpasses the existing algorithms by achieving high performance and overall throughput.

关键词： Leaf disease detection deep convolutional neural networks transfer learning optimization MangoLeafBD Dataset