检索结果-南通市图书馆

CuO–TiO_(2) based self-powered broad band photodetector

在线全文

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第3期6卷 345-354页

作者： Chiranjib Ghosh Arka Dey Iman Biswas Rajeev kumar Gupta Vikram Singh Yadav Ashish Yadav Neha Yadav Hongyu Zheng Mohamed Henini Aniruddha mondal Department of Physics National Institute of Technology DurgapurWest BengalIndia Department of Physics University of Petroleum&Energy Studies DehradunUttarakhandIndia Babasaheb Bhimrao Ambedkar University Lucknow226031India Center for Advanced Laser Manufacturing(CALM) Shandong University of TechnologyZibo255000PR China School of Physics and Astronomy University of NottinghamNottinghamNG72RDUnited Kingdom

An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is *** CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)*** CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination *** devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light *** maximum response of the devices is observed at 300 nm for an illumination power of 10 *** response and recovery times were calculated as 86 ms and 78 ms,***,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination *** main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the *** illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)*** characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.

关键词： Self-powered CuO–TiO_(2) nanocomposite Broadband photodetector Two-zone horizontal tube furnace Responsivity

Two-Stent Strategy for Bifurcation Lesions in Percutaneous Transluminal Coronary Angioplasty: Real-World Evidence

在线全文

学校读者我要写书评

暂无评论

World Journal of Cardiovascular Diseases 2024年第3期14卷 140-156页

作者： Dilip kumar amit Malviya Animesh Mishra Rabin Chakraborty Sanjeev S. Mukherjee Soumya Patra Arindam Pande Rana Rathor Roy Debopriyo mondal Ashesh Halder Sumit Shanker Medica Superspecialty Hospital 127 Eastern Metropolitan Bypass Nitai Nagar Mukundapur Kolkata West Bengal India North Eastern Indira Gandhi Regional Institute of Health & Medical Sciences (NEIGRIHMS) Mawdiangdiang Shillong Meghalaya India

Background: Bifurcation lesions pose a high risk for adverse events after percutaneous coronary intervention (PCI). Evidence supporting the benefits of the two-stent strategy (2SS) for treating coronary bifurcation lesions in India is limited. This study aimed to evaluate the clinical outcomes of various 2SSs for percutaneous transluminal coronary angioplasty for bifurcation lesions in India. Materials and Methods: This retrospective, observational, multicentric, real-world study included 64 patients over 8 years. Data on demographics, medical history, PCI procedures, and outcomes were recorded. Descriptive statistics were computed using the SPSS software. Results: Patients (n = 64) had an average age of 65.3 ± 11.1 years, with 78.1% males. Acute coronary syndrome was reported in 18.8%, chronic stable angina in 40.6%, and unstable angina in 34.4% of participants. Two-vessel disease was observed in 98.4% of patients, and 99.4% had true bifurcation lesions. The commonly involved vessels were the left anterior descending artery (50%), left circumflex coronary artery (34.4%), and first diagonal artery (43.8%). Mean percent diameter stenosis was 87.2% ± 10.1%. The mean number of stents used was 2.00 ± 0.34. The 2SS techniques included the T and small protrusion (TAP) (39.1%), double kissing (DK) crush (18.8%), and the culotte techniques (14.1%). Procedural and angiographic success rate was 92.18%. Major adverse cardiovascular events at 1-year follow-up occurred in 7.8% of cases. Conclusion: The 2SS for bifurcation lesions showed favorable in-hospital and follow-up outcomes. Findings can serve as a resource for bifurcation angioplasty in India. Larger real-world studies with robust methodology are needed to validate these results.

关键词： Bifurcation Stenting Coronary Bifurcation Lesions Percutaneous

Advancement of noble metallic nanoparticles in agriculture: A promising future

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pedosphere 2023年第1期33卷 116-128页

作者： Paulami DAM Matthews LPARET Rittick mondal amit kumar MANDAL Chemical Biology Laboratory Department of SericultureRaiganj UniversityNorth DinajpurWest Bengal 733134India University of Florida Department of Plant PathologyQuincy 32351USA Centre for Nanotechnology Sciences Raiganj UniversityNorth DinajpurWest Bengal 733134India

Since the last decades,nanotechnology has gained the attention of researchers in the field of plant *** characteristics of nanoparticles are reliant on their shape and *** involving noble metallic nanoparticles(NMNPs)offer novel technologies to boost agricultural productivity and minimize conventional pesticide *** application of nanoparticles as nanofertilizer improves plant growth and enhances nutrient uptake *** metallic nanoparticles act as antimicrobial agents against multidrug-resistant pathogens and provide protection to *** and nanodevices are utilized in diverse agro-based areas such as plant disease diagnosis and nanoparticle-based material *** studies have focused on negative impacts such as toxicity and environmental threats posed by *** the effects of NMNPs on agriculture is critical for the assessment of their safety and the impending environmental risks to biodiversity and human ***,we summarize the advances of NMNPs towards revolutionizing modern agricultural applications and the recent trends in sustainable precision agriculture.

关键词： antimicrobial agents multidrug-resistant pathogens nanobiosensors nanofertilizers plant protection

Enhanced photocatalytic activity of methylene blue using heterojunction Ag@TiO_(2)nanocomposite:Mechanistic and optimization study

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2023年第12期64卷 49-63页

作者： Saptarshi Ghosh Kamalesh Sen Priyanka Debnath Arghadip mondal Naba kumar mondal Aerosol and Nanoparticle Technology Laboratory Environmental Science and Engineering Department.Indian Institute of Technology BombayMumbai 400076India Environmental Chemistry Laboratory Department of Environmental ScienceThe University of BurdwanW.B 713104India

The objective in this study is to investigate the adsorption-degradation of the methylene blue(MB)dye using a fabricated heterojunction Ag@TiO_(2)*** batch factors used in photo catalytic reactions were pH,UV-irradiation time,temperature,catalytic dosage,and concentration of *** results showed that 0.2×10^(3) g·ml^(-1))of the catalytic dose caused the Ag@TiO_(2)adsorption to degrade by 96.67%with darks and UV *** the Langmuir-Hinshelwood model to determine the kinetic,the Ag@TiO_(2)displays a greater kinetic rate than TiO_(2)and silver nanoparticle(AgNPs).The photocatalytic degradation of MB,which is an endothermic reaction involving all catalysts,is shown by the thermodynamic parameter to have the positive value of enthalpy(ΔH°).The enthalpies observed were Ag@TiO_(2)(126.80 kJ·mol^(-1))

关键词： Heterojunction Ag@TiO_(2)nanocomposite Methylene blue dye Langmuir-Hinshelwood model Scavenger Density functional theoty

Isothermal Grain Growth of Austenite in Hypoeutectoid and Hypereutectoid Plain Carbon Steels

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2010年第7期17卷 38-43页

作者： Joydeep Maity Dipak kumar mondal Department of Metallurgical and Materials Engineering National Institute of Technology Durgapur

Grain growth kinetics of austenite in a hypoeutectoid steel（containing carbon of 0.35%）at 920 ℃ and in a hypereutectoid steel（containing carbon of 1%）at 980 ℃ for holding time ranging from 1 h to 6 h was *** hypoeutectoid steel exhibited normal grain growth without solute drag hindrance with a time exponent（0.51）close to the theoretical value（0.5）.However,the grain growth of austenite in the hypereutectoid steel held up to 3 h was extremely slow,characterizing by a low value of time exponent（0.08）.Thereafter,a breakaway occurred and the grain growth in the hypereutectoid steel held from 3 h to 6 h progressed normally with a time exponent（0.52）close to the theoretical value（0.5）.

关键词： plain carbon steel grain growth time exponent solute drag

Analytics of an Imperfect Four-Layer Production Inventory Model Under Two-Level Credit Period Using Branch-and-Bound Technique

在线全文

学校读者我要写书评

暂无评论

Journal of the Operations Research Society of China 2022年第4期10卷 725-748页

作者： Subrata Panja Shyamal kumar mondal Department of Applied Mathematics with Oceanology and Computer Programming Vidyasagar UniversityMidnaporeW.B.721102India

This paper explains an integrated production inventory supply chain model,which consists of a supplier,a manufacturer and a retailer under two-level credit *** is manufacturer’s credit period offered by the supplier,and other is retailer’s credit period offered by the ***,the manufacturer replenishes raw materials from the supplier and produces non-deteriorating products in some cycles of equal *** is noted that here four inventory structures have been considered to show the flow of the materials as either raw materials or finished products from supplier to retailer via *** in this model,manufacturer’s imperfect production has been *** imperfect items are not *** retailer receives good finished products from the manufacturer and sells these to his/her customers during some cycles of equal length in total time *** main objective is to find the optimal number of production and business cycles of the manufacturer such that the integrated system can get the maximum *** above discussed model is elaborated with the help of a numerical example,and a sensitivity analysis is done with respect to some parameters used in this model.

关键词： Supply chain Integrated production inventory Four-layer inventory system Imperfect production Two-level credit period

Litterfall,decomposition and nutrient release of Shorea robusta and Tectona grandis in a sub-tropical forest of West Bengal,Eastern India

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Forestry Research 2016年第5期27卷 1055-1065页

作者： Chittaranjan Das Naba kumar mondal Department of Environmental Science The University of Burdwan

We studied leaf litter fall, decomposition and nutrient release patterns of Shorea robusta and Tectona grandis by using a litter bag technique to better understand the release pattern of nutrients to soil from leaf litter. Annual litterfall varied from 13.40 ± 2.56 t ha-1 a-1 for S. robusta to 11.03 ± 3.72 t ha-1 a-1 for T. grandis and the decay constant （k） of decomposed leaf litter was distinctly higher for T. grandis （2.70 ± 0.50 a-1） compared to S. robusta （2.41 ±0.30 a-1）. Biomass loss was positively correlated with the initial litter C, WSC, C/N and ash content in S. robusta and N, P and K concentration for T. grandis. Biomass was negatively correlated with lignin and L/N ratio for S. robusta and L, WSC, L/N and C/N ratio for T. grandis （P 〈 0.01）. Nutrient use efficiency （NUE） and nutrient accumulation index （NAI） of S. robusta was higher than for T. grandis. The retranslocation of bioelements from senescent leaves ranked as P 〉 N 〉 K. Annual N, P and K input to soil through litterfall differed significantly between the two species in the following order： N〉K^P. S. robusta was superior in terms of K and P return and T. grandis was superior in terms of N return. The two tree species showed a similar patterns of nutrient release （K 〉 P 〉 N） during decomposition of their leaf *** of N, K and P were the primary limiting nutrients returned to soil through litterfall with important roles in soil fertility and forest productivity.

关键词： Decay constant Lignin Litterfall Nutrientreturn Decomposition Nutrient use efficiency

Understanding pore characteristics through core-based petrographic and petrophysical analysis in a heterogeneous carbonate reservoir:A case study from the Mumbai Offshore Basin,India

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2023年第4期8卷 469-480页

作者： Ilius mondal kumar Hemant Singh Department of Earth Science Indian Institute of TechnologyBombayIndia

Carbonate rocks exhibit complex and heterogeneous pore structures;such heterogeneity is manifested by the occurrence of a wide variety of pore types with different sizes and geometries as a result of depositional and diagenetic *** complications substantially increase the uncertainty of predicted rock hydraulic parameters because samples with comparable porosities might have very different permeability *** this study,small-scale characterisation of porosity and permeability in heterogeneous Eocene limestone samples from the Bassein Formation of the B-X structure of the MK Field in Mumbai Offshore Basin,India,was carried out,employing an integrated framework that in-corporates thin-section petrography,routine core analysis,mercury injection capillary pressure and nuclear magnetic resonance *** pore characteristics of these carbonates range from poor to *** studied samples exhibited large ranges of porosity,permeability and other associated petrophysical *** pore types,as well as their orientations and connectivity,are the primary factors causing the *** of the complexity of the pore networks,a simple lithofacies classification alone would have been insufficient to link porosity and *** reservoir char-acteristics in the study area are strongly linked to the development and/or destruction of reservoir porosity-permeability during different phases of ***-four carbonate core samples from the limestone unit were studied and classified into microfacies and pore type classes,producing an accurate assessment of reservoir *** comprehensive workflow incorporates the pore volume distributions and pore throat attributes for each rock *** carbonate microfacies were identified by petrographic analysis and their petrophysical characteristics,such as porosity,permeability,pore throat size,pore volume and fluid flow factors,were *** study demonstrates how macro-porosity

关键词： Carbonatereservoir Permeability Mercury injection capillary pressure Nuclear magnetic resonance Porosity partitioning

Fluid substitution in NMR T_(2)distribution and resistivity independent saturation computation using synthetic capillary pressure data

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Research 2023年第1期8卷 77-86页

作者： Ilius mondal kumar Hemant Singh Department of Earth Science Indian Institute of Technology BombayIndia

Petrophysicists and reservoir engineers utilise the capillary pressure and saturation-height function for calculating the water saturation of any reservoir,at a given height above the free water *** results have a big impact on reserve *** majority of capillary pressure studies are carried out in labs with core ***,on the other hand,are usually altered from their original state before being delivered to ***,the accuracy of discrete sets of core data in describing entire reservoir parameters,is still up for *** of the capillary pressure curve in reservoir condition is an important subject that is challenging to *** use of nuclear magnetic resonance(NMR)logs for oil and gas exploration has grown in popularity over the last few ***,most of the time the utilization of the data is limited for evaluating porosity-permeability,distributions and computation of irreducible water *** the advent of fluid substitution methods,NMR T_(2)distributions may now be used to synthesize core equivalent capillary pressure *** fluid substitution workflow,our study introduces a better approach for obtaining capillary pressure curves from the NMR T_(2)*** available core data has been used to calculate calibration parameters for better saturation height *** workflow introduces a novel approach in resistivity independent saturation *** the exploratory wells of our study area,computed water saturation derived from the saturation height function exhibits encouraging agreement with resistivity based water saturation from multi-mineral *** NMR based saturation height modelling approach has been included in study area for the first time so far.

关键词： Carbonate reservoir NMR fluid Substitution Capillary pressure Saturation height function Resistivity independent saturation