检索结果-南通市图书馆

Dominant factors in MiniCone, CPT and pile correlations: A data‐based approach

Deep Underground Science and Engineering 2023年第4期2卷 346-358页

作者： Seyed Sajad Shirani Abolfazl Eslami amirhossein ebrahimipour Moses Karakouzian Department of Civil and Environmental Engineering Amirkabir University of Technology(AUT)(Tehran Polytechnic)TehranIran University of California San Diego San DiegoCaliforniaUSA Department of Civil and Environmental Engineering and Construction University of NevadaLas VegasNevadaUSA

The cone penetration test(CPT)contributes to the design and analysis of piles regarding geometry,installation effect,and pile capacity(shaft and toe resistance).MiniCone,as an alternative to CPT sounding,has been used to carry outﬁeld and laboratory investigations by physical modeling.More tests can be practically carried out through light equipment and small soil mass,involving fewer errors caused by boundary conditions.Furthermore,it can be used for in situ testing,such as quality control,assessment of ground improvement,and subgrade characterization.A database comprising MiniCone and CPT records inﬁeld and physical modeling is proposed with a variety of cone diameters.The case study records in the database have been obtained from 140 tests compiled from data from 26 sources.The sources include the results of 20 physical modelings andﬁeld data from six sites in 10 countries.The data comprise MiniCone and CPT cone tip resistance(qc),and sleeve friction(fs).The different cones are used in sandy,silty sand,and clayey soils via simple chambers(1 g),calibration chambers,and frustum conﬁning vessels.In addition,correlations were found in penetration records in terms of physical modeling types,cone diameters,penetration rates,and soil densities.Moreover,qc and fs are related to capacities of pile toes and shafts using proper correlation coefﬁcients less than unity,respectively.Correlations and dominant factors in geotechnical practice between MiniCone,CPT,and pile have been reviewed and discussed.

关键词： correlations CPT database dominant factors MiniCone pile

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Platform Evolution in an Oligo-Miocene Back-arc Basin:An Example from the Central Iran Basin

引用

Acta Geologica Sinica(English Edition) 2024年第1期98卷 185-206页

作者： Masoud SHARIFI-YAZDI amirhossein ENAYATI Jamal SALEHI AGHDAM Mohammad BAHREHVAR Seyed Mustafa REZAEI Department of Geology Faculty of Earth SciencesGeography and AstronomyUniversity of Vienna1090 Vienna.Austria Geology and Geophysics Department Tehran Energy Consultants(TEC Co.)TehranIran School of Geology College of ScienceUniversity of TehranTehranIran Department of Geology Tarbiat Modares UniversityTehranIran

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran.The Qom platform developed in a back-arc basin during the Oligo-Miocene due to the closing of the Tethyan Seaway.This formation consists of a variety of carbonate and non-carbonate facies deposited on a platform ranging from supratidal to basin.A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area.Six third-order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo-Miocene succession.According to all results and data,this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic-carbonate composition,including the Bouma sequence.Then,from the late Chattian to the Aquitanian,the platform changed into a homoclinal carbonate ramp with a gentle profile.With respect to tectonic activity,this phase was a calm period during the deposition of the Qom Formation.Finally,a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian,terminated by the continental deposits of the Upper Red Formation.Regarding all geological characteristics,three main tectono-eustatic evolutionary phases have been recognized in the Qom back-arcbasin.

关键词： carbonate ramp depositional facies submarine fan eustasy basement faults back-arc basin

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Understanding the Novel Approach of Nanoferroptosis for Cancer Therapy

引用

Nano-Micro Letters 2024年第9期16卷 501-556页

作者： Afsana Sheikh Prashant Kesharwani Waleed H.Almalki Salem Salman Almujri Linxin Dai Zhe‑Sheng Chen amirhossein Sahebkar Fei Gao Department of Pharmaceutics School of Pharmaceutical Education and ResearchJamia HamdardNew Delhi 110062India Department of Pharmacology and Toxicology Faculty of PharmacyUmm Al-Qura UniversityMakkahSaudi Arabia Department of Pharmacology College of PharmacyKing Khalid University61421 Asir‑AbhaSaudi Arabia State Key Laboratory of Southwestern Chinese Medicine Resources Pharmacy SchoolChengdu University of Traditional Chinese MedicineChengdu 611130People’s Republic of China Department of Pharmaceutical Sciences College of Pharmacy and Health SciencesSt.John’s UniversityNew York 11439USA Biotechnology Research Center Pharmaceutical Technology InstituteMashhad University of Medical SciencesMashhadIran Applied Biomedical Research Center Mashhad University of Medical SciencesMashhadIran

As a new form of regulated cell death,ferroptosis has unraveled the unsolicited theory of intrinsic apoptosis resistance by cancer cells.The molecular mechanism of ferroptosis depends on the induction of oxidative stress through excessive reactive oxygen species accumulation and glutathione depletion to damage the structural integrity of cells.Due to their high loading and structural tunability,nanocarriers can escort the delivery of ferro-therapeutics to the desired site through enhanced permeation or retention effect or by active targeting.This review shed light on the necessity of iron in cancer cell growth and the fascinating features of ferroptosis in regulating the cell cycle and metastasis.Additionally,we discussed the effect of ferroptosis-mediated therapy using nanoplatforms and their chemical basis in overcoming the barriers to cancer therapy.

关键词： Ferroptosis Nanoparticles Ferrotherapy Cancer Genes Nanotechnology Toxicity Reactive oxygen species

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

挤压速度对搅拌摩擦反挤压法制备Cu-5%Ti_(2)SnC复合丝材性能的影响

引用

Transactions of Nonferrous Metals Society of China 2024年第3期34卷 935-951页

作者： amirhossein JAHANI Hamed JAMSHIDI AVAL Mohammad RAJABI Roohollah JAMAATI Department of Materials Engineering Babol Noshirvani University of TechnologyShariati AvenueBabol 47148-71167Iran

对粉末冶金法制备的含5%(体积分数)Ti_(2)Sn CMAX相的初始复合材料进行搅拌摩擦反挤压(FSBE)处理,研究FSBE工艺的轴向横移速度对Cu-Ti_(2)Sn C复合线材显微组织、力学性能、电学性能和磨损性能的影响。结果表明,随着挤压速度的增加,显... 详细信息

对粉末冶金法制备的含5%(体积分数)Ti_(2)Sn CMAX相的初始复合材料进行搅拌摩擦反挤压(FSBE)处理,研究FSBE工艺的轴向横移速度对Cu-Ti_(2)Sn C复合线材显微组织、力学性能、电学性能和磨损性能的影响。结果表明,随着挤压速度的增加,显微组织中孪晶增多,Ti_(2)SnC颗粒细化,MAX相和Cu基体之间的界面结合改善。当转速为600r/min,轴向横移速度为25mm/min时,Cu-Ti_(2)SnC复合线材具有最大的硬度、屈服强度和极限抗拉强度,分别为HV 132.7、278.34MPa和485.15MPa,这是其更强的界面结合和更细的MAX相导致的。此外,当转速为600 r/min,轴向横移速度为25 mm/min时,Cu-Ti_(2)SnC复合丝的电导率最高,达到89.21%(IACS),磨损率最低,为0.0015 mg/m,这是其更大的晶粒尺寸、更强的界面结合与更低的密度导致的。

关键词：搅拌摩擦反挤压 Ti_(2)SnC MAX相铜基复合材料电导率

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Frequency-Diversified Space-Efficient Radiating Surface Using Convolved Electric and Magnetic Currents for Highly Dense Multiband Antenna-Frontend Integration

引用

Electromagnetic Science 2024年第1期2卷 63-76页

作者： amirhossein Askarian Pascal Burasa Ke Wu Department of Electrical Engineering Poly-Grames Research CenterPolytechnique MontrealQC H3T1J4Canada

We propose and investigate a methodology based on convolved electric and magnetic currents for the generation of multi-band responses over a space-shared radiating surface.First,a single wideband antenna operation principle based on inter-leaved dipole and slot modes is studied and analyzed using full-wave simulations followed by a qualitative time domain analysis.Subsequently,a 2×2 dual-band radiating unit is conceived and developed by closely arranging single wideband antennas.In this case,multimode resonances are generated in a lower frequency band by a proper convolving and coupling of the magnetic and electric currents realized in the gaps between the antennas and on the surface of the antennas,respectively.This methodology can be deployed repeatedly to build up a self-scalable topology by reusing the electromagnetically(EM)connected radiating surfaces and gaps be-tween the radiating units.Due to the efficient reuse of the electromagnetic region for the development of multiband radiation,a high aperture-reuse efficiency is achieved.Finally,as a proof of concept,a 2×4 dual-band array operating in Ku-and Ka-bands is devel-oped and fabricated by a linear arrangement of the two developed radiating units.Our measurement results show that the proposed antenna array provides impedance and gain bandwidths of 30%and 25.4%in the Ku-band and 10.65%and 8.52%in the Ka-band,respectively.

关键词： Aperture-shared array Aperture-reused efficiency Antenna-frontend integration Dual-band antenna Magneto-electric dipole antenna Multi-mode resonance Multi-band array Multi-functional antenna Wideband antenna array

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

First Light Curve Analysis of NSVS 8294044,V1023 Her,and V1397 Her Contact Binary Systems

引用

Research in Astronomy and Astrophysics 2024年第5期24卷 1-12页

作者： Atila Poro Sabrina Baudart Mahshid Nourmohammad Zahra Sabaghpour Arani Fatemeh Farhadi Selda Ranjbar Salehian Ahmad Sarostad Saeideh Ranjbaryan Iri Olya Maryam Hadizadeh amirhossein Khodaei Astronomy Department of the Raderon AI Lab. BurnabyBCCanada Double Stars Committee SociétéAstronomique de FranceParisFrance Independent Astrophysics Researcher IsfahanIran Akhtaran Astronomical Society Isfahan ProvinceAran and BidgolIran Department of Physics Faculty of ScienceZanjan UniversityZanjanIran Astronomy Students'Scientific Association University of TabrizEast Azerbaijan ProvinceTabrizIran Yazd Desert Night Sky Astronomy Institute Yazd ProvinceYazdIran Ayaz Astronomical Association East Azerbaijan ProvinceTabrizIran Khayyam Astronomy Association FarsFasaIran

The first photometric light curve investigation of the NSVS 8294044,V1023 Her,and V1397 Her binary systems is presented.We used ground-based observations for the NSVS 8294044 system and Transiting Exoplanet Survey Satellite data for V1023 Her and V1397 Her.The primary and secondary times of minima were extracted from al the data,and,by collecting the literature,a new ephemeris was computed for each system.Linear fits for the O-C diagrams were conducted using the Markov Chain Monte Carlo (MCMC) method.Light curve solutions were performed using the PHysics Of Eclipsing BinariEs Python code and the MCMC approach.The systems were found to be contact binary stars based on the fillout factor and mass ratio.V1023 Her showed the O’Connell effect and a cold starspot on the secondary component was required for the light curve solution.The absolute parameters of the system were estimated based on an empirical relationship between orbital period and mass.We presented a new T–M equation based on a sample of 428 contact binary systems and found that our three target systems were in good agreement with the fit.The positions of the systems were also depicted on the M–L,M–R,q–L_(ratio),and M_(tot)–J_(0)diagrams in the logarithmic scales.

关键词： (stars:)binaries eclipsing-techniques photometric-stars individual(NSVS 8294044)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications:A review

引用

Journal of Magnesium and Alloys 2023年第4期11卷 1125-1161页

作者： Hassan Delavar amirhossein Jabbari Mostahsan Hamdy Ibrahim School of Mechanical Engineering Iran University of Science and TechnologyTehranIran Department of Mechanical Engineering Sharif University of TechnologyTehranIran Mechanical Engineering Department University of Tennessee at ChattanoogaChattanoogaTN 37403USA

Recently,the topic of bioresorbable metals,with much focus on magnesium for bone implant applications,has been an area of considerable investigation.Indeed,it could be argued that magnesium is the most promising biodegradable material currently being studied for use as an orthopedic skeletal fixation and joint replacement hardware.However,the fast degradation rate of magnesium-based materials in the physiological environment negatively affects their mechanical integrity and hence limits their biomedical use.The most critical conditions may occur when the implant is subjected to a corrosive physiological environment and a fluctuating load during daily activities.Hence,numerous studies have been published on the synthesis,alloying,and coating of magnesium to control degradation rate and increase strength and durability.Among the materials and strategies employed to achieve these goals,magnesium-based biocomposites have exhibited superior mechanical properties and acceptable biocompatibility.However,there is a lack of understanding of their corrosion and corrosion-fatigue behavior.Such understanding is necessary to qualify these new materials for various bio-implant applications.To this end,this paper reviews the recent advances in the corrosion and corrosion-fatigue behavior of magnesium-based biocomposites.It also provides a comprehensive discussion of different factors that influence the biocompatibility,corrosion,fatigue,and corrosion-fatigue of magnesium-based biocomposites as potential implant materials.This study emphasizes that despite the abundance of various studies on the corrosion behavior of magnesium-based biocomposites,there is an imperative need for more fatigue and corrosion-fatigue studies.

关键词： Magnesium biocomposites Biodegradable implants Corrosion Fatigue Corrosion-fatigue

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Barriers to big data analytics (BDA) implementation in manufacturing supply chains

引用

Journal of Management Analytics 2023年第1期10卷 191-222页

作者： amirhossein Dehkhodaei Bahar Amiri Hasan Farsijani Abbas Raad Department of Management and Accounting Shahid Beheshti UniversityTehranIran

Big data analysis(BDA)can increase the capability of supply chain analysis of manufacturing companies.Therefore,many manufacturing companies want to use BDA,but it has been seen that BDA implementation is difficult,especially in developing countries due to the existence of various barriers related to finance,government regulations,etc.This paper aims to investigate the barriers to BDA implementation in Iranian companies.In literature,limited work has been done on identifying barriers to implementing BDA in developing countries.In this regard,34 barriers were identified to BDA adoption in Iran by employing a literature review and feedback received from experts.Then,the most important barriers(14)were analyzed using integrated Interpretive Structural Modeling and MICMAC approach.Results show that two barriers;namely,lack of sufficient knowledge of senior managers and weakness of governance policies,are the most significant.Finally,crucial policy measures and recommendations are proposed to assist managers and government bodies.

关键词： Barriers Big data analytics Interpretive Structural Modeling(ISM) MICMAC Analysis Modeling Supply Chain Management

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Investigation of trend between porosity and drilling parameters in one of the Iranian undeveloped major gas fields

引用

Petroleum Research 2023年第1期8卷 63-70页

作者： Abbas Ayatizadeh Tanha amirhossein Parizad Khalil Shahbazi Hassan Bagheri Department of Chemical Engineering Tarbiat Modares UniversityTehranIran National Iranian Drilling Company Well Logging DepartmentAhwazIran Petroleum Engineering Department Petroleum University of TechnologyAhwazIran Petroleum Exploration College of Mining EngineeringUniversity of TehranIran

Porosity is one of the main parameters that should be considered when a gas or an oil field is assessed.Hence,the availability of porosity is crucial in any rock and formation analysis.However,this parameter is not always available and direct measurement is scarce and usually is confined to appraisal phase of a field.Therefore,in this study it is aimed to find a relationship in order to estimate porosity in afterward phases.The data of 5 appraisal wells of an undeveloped gas field has been gathered to perform this purpose.The full set wireline logging data and drilling data were available.The data inherit high level of fluctuation which is normal with respect to real direct measured data.The smoothed curving was utilized and as a result,the fluctuation was diminished considerably and the feasibility of carrying out the investigation was being established,accordingly.To normalize and gather drilling data in a parameter in order to have a better view and investigation,sigmalog method was employed.It was observed that there is a clear exponential relationship between porosity and drilling data and curve fitting was utilized to conduct a numerical relationship.The curve fitting was established with R^(2)=0.83 and a trustworthy fitting resulted.The results demonstrate the possibility of porosity estimation by using drilling data.Furthermore,a numerical relationship is given for a specific field.The porosity estimation can lead to better analysis of newly drilled rocks and formations leading to more efficient field development strategies.

关键词： Porosity Drilling data Sigmalog D exponent Wireline logging

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

COVID-19 and liver injury:Pathophysiology,risk factors,outcome and management in special populations

引用

World Journal of Hepatology 2023年第4期15卷 441-459页

作者： Romina Roshanshad amirhossein Roshanshad Reza Fereidooni Mahnaz Hosseini-Bensenjan Student Research Committee School of MedicineShiraz University of Medical SciencesShiraz ***Iran Department of MPH Shiraz University of Medical SciencesShiraz ***Iran Health Policy Research Center Institute of HealthShiraz University of Medical SciencesShiraz ***Iran Hematology Research Center Shiraz University of Medical SciencesShiraz ***Iran

The coronavirus disease 2019(COVID-19)caused by severe acute respiratory syndrome coronavirus-2 is an ongoing health concern.In addition to affecting the respiratory system,COVID-19 can potentially damage other systems in the body,leading to extra-pulmonary manifestations.Hepatic manifestations are among the common consequences of COVID-19.Although the precise mechanism of liver injury is still questionable,several mechanisms have been hypothesized,including direct viral effect,cytokine storm,hypoxic-ischemic injury,hypoxiareperfusion injury,ferroptosis,and hepatotoxic medications.Risk factors of COVID-19-induced liver injury include severe COVID-19 infection,male gender,advanced age,obesity,and underlying diseases.The presentations of liver involvement comprise abnormalities in liver enzymes and radiologic findings,which can be utilized to predict the prognosis.Increased gamma-glutamyltransferase,aspartate aminotransferase,and alanine aminotransferase levels with hypoalbuminemia can indicate severe liver injury and anticipate the need for intensive care units’hospitalization.In imaging,a lower liver-to-spleen ratio and liver computed tomography attenuation may indicate a more severe illness.Furthermore,chronic liver disease patients are at a higher risk for severe disease and death from COVID-19.Nonalcoholic fatty liver disease had the highest risk of advanced COVID-19 disease and death,followed by metabolic-associated fatty liver disease and cirrhosis.In addition to COVID-19-induced liver injury,the pandemic has also altered the epidemiology and pattern of some hepatic diseases,such as alcoholic liver disease and hepatitis B.Therefore,it warrants special vigilance and awareness by healthcare professionals to screen and treat COVID-19-associated liver injury accordingly.

关键词： SARS-CoV-2 COVID-19 Liver injury Chronic liver disease Management Liver transplant

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：