检索结果-南通市图书馆

Transactions of Nonferrous Metals Society of China 2024年

作者： Rania E.Hammam Engie M.Safwat Soha A.abdel-Gawad Madiha Shoeib Shimaa El-Hadad Faculty of Engineering， Modern University for Technology and Information (MTI) Restorative and Dental Materials Department， National Research Centre Giza Chemistry Department， Faculty of Science， Cairo University Central Metallurgical Research and Development Institute P.O.87

Integrating titanium-based implants with the surrounding bone tissue remains challenging. This study aims to explore the impact of different anodization voltages （20-80V） on the surface topography of two-phase （α/β） Ti alloys and to produce TiO2films with enhanced bone formation abilities. Scanning electron microscopy coupled with energy dispersive spectroscopy （SEM-EDS） and atomic force microscopy （AFM） were applied to investigate the morphological， chemical， and surface topography of the prepared alloys and to confirm the growth of hydroxyapatite （HA） on their surfaces. Results disclosed that the surface roughness of TiO2films formed on Ti-6Al-7Nb alloys was superior to that of Ti–6Al–4V alloys. Ti-6Al-7Nb alloy anodized at 80 V had the highest yields of HA after immersion in SBF with enhanced HA surface coverage. The developed HA layer had a mean thickness of 128.38 ± 18.13 μm， suggesting its potential use as an orthopedic implantable material due to its promising bone integration and， hence， remarkable stability inside the human body.

关键词：

Electrochemical anodization of cast titanium alloys in oxalic acid for biomedical applications

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第1期18卷 13-24页

作者： Engie M.Safwat Soha A.abdel-Gawad Madiha A.Shoeib Shimaa El-Hadad Restorative and Dental Materials Department National Research CentreGiza 12622Egypt Chemistry Department Faculty of ScienceCairo UniversityGiza 12613Egypt Central Metallurgical Research and Development Institute Helwan 11421Egypt

Titanium and its alloys have numerous biomedical applications thanks to the composition and morphology of their oxide *** this study,the colorful oxide films were formed by anodizing cast Ti-6Al-4V and Ti-6Al-7Nb alloys in a 10%oxalic acid solution for 30 s at different voltages(20–80 V)of a direct current power *** force microscopy was used as an accurate tool to measure the surface roughness of thin films on the nanometer *** electron microscopy and X-ray diffraction were performed to analyze surface morphology and phase *** to the results,the produced titanium oxide layer showed high surface roughness,which increased with increasing anodizing *** impact of anodizing voltages on the color and roughness of anodized layers was *** corrosion resistance of the anodized samples was studied in simulated body fluid at pH 7.4 and a temperature of 37℃ utilizing electrochemical impedance spectroscopy and the potentiodynamic polarization *** anodized samples for both alloys at 40 V were at the optimal voltage,leading to a TiO_(2) layer formation with the best compromise between oxide thickness and corrosion ***,findings showed that TiO_(2) films produced on Ti-6Al-7Nb alloys had superior surface roughness properties compared to those of Ti-6Al-4V alloys,making them more appropriate for orthopedic *** the obtained data and the fruitful discussion,it was found that the utilized procedure is simple,low-cost,and ***,anodization in 10%oxalic acid proved a viable alternative for the surface finishing of titanium alloys for biomedical applications.

关键词： DC anodization Ti-6Al-4V alloy Ti-6Al-7Nballoy oxidefilm corrosion

Unique Genetic Features of Lean NAFLD: A Review of Mechanisms and Clinical Implications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Clinical and Translational Hepatology 2024年第1期12卷 70-78页

作者： Jasmine Tidwell George y.Wu Department of Medicine University of Connecticut Health CenterFarmingtonCTUSA Division of Gastroenterology-Hepatology University of Connecticut Health CenterFarmingtonCTUSA

Non-alcoholic fatty liver disease(NAFLD)affects 25%of the global *** 20%have a normal body mass index(BMI)and a variant known as lean *** typical NAFLD cases associated with obesity and diabetes,lean NAFLD causes liver disease by mechanisms not related to excess weight or insulin *** disorders are among the major factors in developing lean NAFLD,and genome-wide association studies have identified several genes associated with the *** review aims to increase awareness by describing the genetic markers linked to NAFLD and the defects involved in developing lean NAFLD.

关键词： Lean nonalcoholic fatty liver disease Palatine-like phospholipase domain-containing-3 Transmembrane 6 superfamily member 2 Familial hypobetalipoproteinemia Abetalipoproteinemia

Heritable Chronic Cholestatic Liver Diseases:A Review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Clinical and Translational Hepatology 2024年第8期12卷 726-738页

Chronic cholestasis due to heritable causes is usually diagnosedin ***,many cases can present andsurvive into *** time course varies considerablydepending on the underlying *** data usuallyreveal elevated conjugated hyperbilirubinemia,alkalinephosphatase,and gamma-glutamyl *** be asymptomatic;however,when present,the typicalsymptoms are pruritus,jaundice,fatigue,and *** diagnostic methods and management requireddepend on the underlying *** development of genome-wide associated studies has allowed the identificationof specific genetic mutations related to the pathophysiologyof cholestatic liver *** aim of this review was tohighlight the genetics,clinical pathophysiology,presentation,diagnosis,and treatment of heritable etiologies of chroniccholestatic liver disease.

关键词： Chronic cholestasis Cholestatic liver disease Congenital hepatic fibrosis Caroli disease Caroli syndrome Alagille syndrome Biliary atresia

In-situ construction of grass-like hybrid architecture responsible for extraordinary corrosion performance: Experimental and theoretical approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第1期6卷 44-59页

作者： T.Suhartono F.Hazmatulhaq y.Sheng A.Chaouiki M.P.Kamil y.G.Ko Materials Electrochemistry Group School of Materials Science and EngineeringYeungnam UniversityGyeongsan38541Republic of Korea Research Center for Advanced Materials National Research and Innovation Agency(BRIN)South TangerangBanten15314Indonesia

Despite the engineering potential by the co-existence of inorganic and organic substances to protect vulnerable metallic materials from corrosive environments,both their interaction and in-situ formation mechanism to induce the nature-inspired composite remained less *** present work used three distinctive mercaptobenzazole(MB)compounds working as corrosion inhibitors,such as 2-mercaptobenzoxazole(MBO),2-mercaptobenzothiazole(MBT),and 2-mercaptobenzimidazole(MBI)in a bid to understand how the geometrical structure arising from O,S,and N atoms affected the interaction toward inorganic *** compounds that were used here to control the corrosion kinetics would be interacted readily with the pre-existing MgO layer fabricated by plasma *** phenomenon triggered the nucleation of the root network since MB compounds were seen to be adsorbed actively on the defective surface through the active sites in MB ***,the molecule with twin donor atoms adjacent to the mercapto-sites affected the facile growth of the grass-like structures with‘uniform’distribution via molecular self-assembly,which showed better corrosion performance than those with having dissimilar donor atoms with the inhibition efficiency(η)of 97%*** formation mechanism underlying nucleation and growth behavior of MB molecule was discussed concerning the theoretical calculation of density functional theory.

关键词： Nature-inspired composite Organic-inorganic interaction Corrosion inhibitor Density functional theory Electrochemistry

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai B.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang B.L.Xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

Hierarchical Control Strategy for Load Regulation Based on Stackelberg Game Theory Considering Randomness

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 929-941页

作者： Tingyu Jiang Ping Ju C.y.Chung yuzhong Gong College of Energy and Electrical Engineering Hohai UniversityNanjing 211100China Department of Electrical Engineering City University of Hong KongHong Kong CF624China Department of Electrical and Computer Engineering University of SaskatchewanSaskatoonSK S7N 5A9Canada CSEE IEEE

Demand response has been recognized as a valuable functionality of power systems for mitigating power *** paper proposes a hierarchical control strategy among the distribution system operator(DSO),load aggregators(LAs),and thermostatically controlled loads(TCLs);the strategy includes a scheduling layer and an executive layer to provide load *** the scheduling layer,the DSO(leader)offers compensation price(CP)strategies,and the LAs(followers)respond to CP strategies with available regulation power(ARP)*** of the DSO and LAs are modeled according to their behaviors during the load regulation *** game is adopted to capture interactions among the players and leader and to obtain the optimal strategy for each participant to achieve ***,considering inevitable random factors in practice,e.g.,renewable generation and behavior of users,two different stochastic models based on sample average approximation(SAA)and parameter modification are formulated with improved scheduling *** the executive layer,distributed TCLs are triggered based on strategies determined in the scheduling layer.A self-triggering method that does not violate user privacy is presented,where TCLs receive external signals from the LA and independently determine whether to alter their operation *** simulations are performed on the modified IEEE-24 bus system to verify effectiveness of the proposed strategy.

关键词： Demand response hierarchical control load regulation self-triggering method Stackelberg game

Data-driven Static Equivalence with Physics-informed Koopman Operators

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第1期10卷 432-438页

作者： Wei Lin Changhong Zhao Maosheng Gao C.y.Chung Department of Electrical Engineering The Hong Kong Polytechnic UniversityHong Kong SARChina Department of Information Engineering The Chinese University of Hong KongHong Kong SARChina School of Electrical Engineering Chongqing UniversityChongqing 400044China

With deployment of measurement units,fitting static equivalent models of distribution networks(DNs)by linear regression has been recognized as an effective method in power flow analysis of a transmission *** volatility of measurements caused by variable distributed renewable energy sources makes it more difficult to accurately fit such equivalent *** tackle this challenge,this letter proposes a novel data-driven method to improve equivalency accuracy of DNs with distributed energy *** letter provides a new perspective that an equivalent model can be regarded as a mapping from internal conditions and border voltages to border power *** mapping can be established through 1)Koopman operator theory,and 2)physical features of power flow equations at the root node of a *** of the proposed method is demonstrated on the IEEE 33-bus and IEEE 136-bus test systems connected to a 661-bus utility system.

关键词： Data-driven distribution network Koopman operator theory static equivalent model

Deep bed filtration model for cake filtration and erosion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第2期45卷 355-372页

作者： L.I.KUZMINA y.V.OSIPOV A.R.PESTEREV Department of Applied Mathematics HSE UniversityMoscow 101000Russia Department of Computer Science and Applied Mathematics Moscow State University of Civil EngineeringMoscow 129337Russia

Many phenomena in nature and technology are associated with the filtration of suspensions and colloids in porous media. Two main types of particle deposition,namely, cake filtration at the inlet and deep bed filtration throughout the entire porous medium, are studied by different models. A unified approach for the transport and deposition of particles based on the deep bed filtration model is proposed. A variable suspension flow rate, proportional to the number of free pores at the inlet of the porous medium, is considered. To model cake filtration, this flow rate is introduced into the mass balance equation of deep bed filtration. For the cake filtration without deposit erosion,the suspension flow rate decreases to zero, and the suspension does not penetrate deep into the porous medium. In the case of the cake filtration with erosion, the suspension flow rate is nonzero, and the deposit is distributed throughout the entire porous medium. An exact solution is obtained for a constant filtration function. The method of characteristics is used to construct the asymptotics of the concentration front of suspended and retained particles for a filtration function in a general form. Explicit formulae are obtained for a linear filtration function. The properties of these solutions are studied in detail.

关键词： deep bed filtration cake filtration porous medium particle deposition and erosion analytical solution concentration front

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.B.Zhang S.J.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element