检索结果-南通市图书馆

Applied Mathematics(A Journal of Chinese Universities) 2021年第3期36卷 354-369页

作者： M.R.Foroutan a.s.gholizadeh sh.Najafzadeh R.H.Haghi Department of Mathematics Payame Noor UniversityP O Box 19395-3697TehranIran

This paper investigates the nonlinear boundary value problem resulting from the exact reduction of the Navier-stokes equations for unsteady magnetohydrodynamic boundary layer flow over the stretching/shrinking permeable sheet submerged in a moving *** solve this equation,a numerical method is proposed based on a Laguerre functions with reproducing kernel Hilbert space *** the operational matrices of derivative,we reduced the problem to a set of algebraic *** also compare this work with some other numerical results and present a solution that proves to be highly accurate.

关键词： nonlinear boundary value problem Laguerre reproducing kernel method operational matrix of derivative existence and nonexistence of solutions approximate solution

Correlation between structural phase transition and physical properties of Co^(2+)/Gd^(3+)co-substituted copper ferrite

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1344-1353,I0006页

作者： Mohsen Choupani Ahmad gholizadeh school of Physics Damghan UniversityDamghan36716-45667Iran

The doping of the spinel ferrites with selective cations usually improves the properties of the parent *** effect of Co^(2+)/Gd^(3+)co-substitution on the microstructure,optical,and magnetic properties of Cu1-xCoxFe2-xGdxO4 prepared by the citrate-nitrate auto-combustion synthesis was *** of the samples was performed with powder X-ray diffraction(XRD),Raman and Fouriertransform infrared(FTIR)spectroscopy,field-emission scanning electron microscopy,X-ray energydispersive spectroscopy,UV-Vis spectroscopy,and a vibrating sample *** results of XRD,Raman,and FTIR analysis show a gradual structural phase transition from a tetragonal(I41/amd)structure to a cubic(Fd3m)*** bandgap energy of the studied samples is in a range of 1.57-1.75 eV with a minimum in sample x=0.06 and then *** investigations show that the presence of Co^(2+)/Gd^(3+)cations in an octahedral site of the copper ferrite structure could increase saturation magnetization and coercive field from 567.9 Oe and 23.62 emu/g to 929.4 Oe and 28.27 emu/g,respectively.

关键词： spinel copper ferrite Citrate-nitrate method structure phase transition Microstructure properties Magnetic properties Rare earths

Hydrothermal carbonization pretreatment makes a remarkable difference in activation of rice and lettuce in food waste

在线全文

学校读者我要写书评

暂无评论

Green Chemical Engineering 2024年第3期5卷 348-363页

作者： Lijun Zhang Yifan sun Chao Li shu Zhang Mortaza gholizadeh Xun Hu school of Material science and Engineering University of Jinan Joint International Research Laboratory of Biomass Energy and Materials College of Materials Science and Engineering Nanjing Forestry University Faculty of Chemical and Petroleum Engineering University of Tabriz

Cooked rice and the vegetables like lettuce are common kitchen waste, which are carbonaceous materials and have the potential as feedstock for the production of activated carbon. Cooking is similar to hydrothermal treatment（HTC）, which might impact the subsequent activation of kitchen waste. In this study, the HTC of lettuce, rice, or their mixture and the activation of the resulting hydrochars were conducted. The results indicated that cross-polymerization between the N-containing organics from lettuce and the sugar derivatives from rice took place in their co-HTC, which significantly increased the hydrochar yield. Activation of the hydrochar from the coHTC generated the AC with a yield of 2 times that from direct activation of mixed lettuce/rice. However, the coHTC facilitated aromatization, reducing reactivity with K2C2O4in activation and producing the AC with main micropores and low specific surface area. Activation of the hydrochar from HTC of rice followed the above trend,while that from lettuce was the opposite. The organics in lettuce were thermally unstable and could not undergo sufficient aromatization. The activation of hydrochar from HTC of lettuce thus generated the AC with the lowest yield, but the highest specific surface area（1684.9 m2/g）, abundant mesopores, and superior capability for adsorption of tetracycline. However, the environmental impacts and energy consumption for the production of AC from the hydrochar of lettuce were higher than that from hydrochar of co-HTC.

关键词： Food waste Hydrothermal pretreatment Hydrochar Chemical activation Products properties

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

生物化学与生物物理进展 2023年第2期50卷 371-384页

作者： Ashraf gholizadeh Division of Biochemistry Department of Animal SciencesFaculty of Natural SciencesUniversity of TabrizTabrizIran

Objective DUF538(domain of unknown function 538) domain containing proteins are known as putative hypothetical proteins in plants. Until yet, there is no much information regarding their structure and function. Methods In the present research work, the homologous structures and binding potentials were identified between plant/mammalian lipocalins and plant DUF538 protein by using bioinformatics and experimental tools including molecular dynamics simulation, molecular docking and recombinant technology-based techniques. Results Molecular docking analysis of their interactions with lipidic ligands including cholesterol and palmitic acid revealed the similar and comparable binding potentials between DUF538 and lipocalin proteins. Both the test proteins were found to have more affinity to cholesterol molecule in compare to palmitic acid. By using recombinant technology-based experiments, the heterologously expressed and purified fused product of DUF538 protein exhibited about 61% cholesterol binding ability. Conclusion As a conclusion, plants DUF538 protein family was predicted to be the structural and may be the functional homologues of plants/animals lipocalin superfamily.

关键词： binding potential cholesterol DUF538 lipocalin palmitic acid

Effect of Eu3+,Bi3+,and Li+ doping on luminescent property of GdNbO4

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 66-75页

作者： s.W.Wi Y.s.Lee Department of Physics and Integrative Institute of Basic sciences Soongsil University

We investigated the emission properties of Eu3+-doped GdNbO4-based oxide phosphors,aiming at improving the Eu3+emission by codoping of Bi3+and Li+.Eu3+singly doped,Eu3+and Bi3+doubly doped,and Eu3+,Bi3+,and Li+triply doped GdNbO4were prepared using a high-temperature solid-state reaction *** red-orange emissions from Eu3+in the singly doped samples are significantly improved by the codoping of Bi3+,mainly due to the energy transfer from Bi3+to Eu3+.The additional codoping of Li+is found to increase the Eu3+emission *** improvement might be attributed to the increase in the photoluminescent quantum yield originating from larger grain sizes and better crystallinity.A detailed analysis of the X-ray diffraction pattern and the asymmetric ratio estimated from the photoluminescence spectra show that the local lattice environment around Eu3+in GdNbO4does not change significantly with the codoping of Bi3+and Li+.Our results indicate that Li+doping is a promising way to improve the emission properties of rare-earth ion-doped GdNbO4phosphors.

关键词： Eu 3+ GdNbO 4 Codoping of Li + Photoluminescence sensitizer Rare earths

First evidence for chiral wobbling of triaxial nuclei

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nuclear science and Techniques 2024年第7期35卷 4-7页

作者： s.Frauendorf Department of Physics and Astronomy University of Notre DameNotre DameIN 46556USA

Chirality(Greek“handiness”)is a property of many com-plex *** molecules exist in two forms,one being the mirror image of the *** for our hands,it is impossible to make the images identical by a suitable *** two forms are called left-handed and *** have the same binding energy,because the electro-magnetic interaction,which holds the molecule together,does not change under a *** properties that are insensitive to the geometry are also the *** different geometry is the reason why the left-handed form turns the polarization plane of transmitted light in one direction by some angle while the right-handed form turns it in the oppo-site direction by the same ***,the geometrical differences between the two species may have other *** two species of the carvon molecule shown in Fig.1 taste quite differently.

关键词： turns Chiral mirror

Tribological behavior of lubricant-impregnated porous polyimide

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 711-725页

作者： Jinbang LI Ningning ZHOU Janet s.s.WONG school of Mechanical Engineering and Mechanics Ningbo UniversityNingbo 315211China Beijing Key Laboratory of Long-life Technology of Precise Rotation and Transmission Mechanisms Beijing Institute of Control EngineeringBeijing 100029China Department of Mechanical Engineering Imperial College LondonLondon SW72AZUK

Porous materials impregnated with lubricants can be used in conditions where limited lubricant is *** this work,three porous polyimides(PPI)with different densities were ***(PAO)impregnated PPI(iPPI)discs were rubbed against steel and sapphire *** operando observations of the iPPI-sapphire contacts show that oil is released under an applied load,forming a meniscus around *** at the outlet is created at high sliding *** amount of released oil increases with increasing PPI *** moduli,E*,estimated based on the actual contact size show that trapped oil in iPPIs contributes to load *** higher speeds,tribological rehydration of the contact occurs in low density iPPI,with that E*rises with *** high density PPIs,high speeds give a constantly high E*which is limited by the viscoelastic properties of the PPI network and possibly the rate of oil *** of iPPI-steel contacts is governed by the mechanical properties of the PPI,the flow of the lubricant,and the roughness of the PPI *** low-and medium-density(highly porous,high roughness)PPIs,large amount of oil is released,and lubrication is mainly via lubricant restricted in the contact in the pores and possibly tribological *** high density(low porosity)PPI,with lower roughness,hydrodynamic lubrication is achieved which gives the lowest *** results show that polymeric porous materials for effective lubrication require the optimization of its surface roughness,stiffness,oil flow,and oil retentions.

关键词： polyimide porous material friction mechanism polymer limited lubrication

Enhancing fatigue performance of AZ31 magnesium alloy components fabricated by cold metal transfer-based wire arc directed energy deposition through LPB

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1638-1662页

作者： shambhu Kumar Manjhi srikanth Bontha A.s.s.Balan Department of Mechanical Engineering National Institute of Technology KarnatakaSurathkalSrinivasanagarMangaloreKarnataka 575025India

Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace ***,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing *** this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 *** findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED *** Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the *** treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress ***,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature *** contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue *** findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy *** study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface d

关键词： Wire arc additive manufacturing AZ31 Mg alloy Low plasticity burnishing Low cycle fatigue test strain amplitude

Ren-integrable and ren-symmetric integrable systems

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第3期76卷 62-69页

作者： s Y Lou school of Physical science and Technology Ningbo UniversityNingbo315211China

A new type of symmetry,ren-symmetry,describing anyon physics and corresponding topological physics,is ***-symmetry is a generalization of super-symmetry which is widely applied in super-symmetric physics such as super-symmetric quantum mechanics,super-symmetric gravity,super-symmetric string theory,super-symmetric integrable systems and so *** and Grassmann numbers are,in some sense,dual conceptions,and it turns out that these conceptions coincide for the ren situation,that is,a similar conception of ren-number(R-number)is devised for *** particular,some basic results of the R-number and ren-symmetry are exposed which allow one to derive,in principle,some new types of integrable systems including ren-integrable models and ren-symmetric integrable *** examples of ren-integrable KdV-type systems and ren-symmetric KdV equations are explicitly given.

关键词： symmetries integrable systems anyon physics extended supersymmetry ren-symmetry

AutoRhythmAI: A Hybrid Machine and Deep Learning Approach for Automated Diagnosis of Arrhythmias

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第2期78卷 2137-2158页

作者： s.Jayanthi s.Prasanna Devi Department of Computer science and Engineering SRM Institute of Science and Technology-Vadapalani CampusChennaiTamil NaduIndia

In healthcare,the persistent challenge of arrhythmias,a leading cause of global mortality,has sparked extensive research into the automation of detection using machine learning(ML)***,traditional ML and AutoML approaches have revealed their limitations,notably regarding feature generalization and automation *** glaring research gap has motivated the development of AutoRhythmAI,an innovative solution that integrates both machine and deep learning to revolutionize the diagnosis of *** approach encompasses two distinct pipelines tailored for binary-class and multi-class arrhythmia detection,effectively bridging the gap between data preprocessing and model *** validate our system,we have rigorously tested AutoRhythmAI using a multimodal dataset,surpassing the accuracy achieved using a single dataset and underscoring the robustness of our *** the first pipeline,we employ signal filtering and ML algorithms for preprocessing,followed by data balancing and split for *** second pipeline is dedicated to feature extraction and classification,utilizing deep learning ***,we introduce the‘RRI-convoluted trans-former model’as a novel addition for binary-class *** ensemble-based approach then amalgamates all models,considering their respective weights,resulting in an optimal model *** our study,the VGGRes Model achieved impressive results in multi-class arrhythmia detection,with an accuracy of 97.39%and firm performance in precision(82.13%),recall(31.91%),and F1-score(82.61%).In the binary-class task,the proposed model achieved an outstanding accuracy of 96.60%.These results highlight the effectiveness of our approach in improving arrhythmia detection,with notably high accuracy and well-balanced performance metrics.

关键词： Automated machine learning neural networks deep learning arrhythmias