检索结果-南通市图书馆

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 407-424页

作者： M.safi M.VAKIliFARD M.J.MAHMOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of Mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(Bgs),the simulations of wave transmission in the time and frequency domains are performed using the COMSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest Bg,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Performances of fissured red sandstone after thermal treatment with constant-amplitude and low-cycle impacts

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and geotechnical Engineering 2024年第2期16卷 561-587页

作者： Yongjun Chen Tubing Yin P.g.Ranjith Xibing li Qiang li Dengdeng Zhuang School of Resources and Safety Engineering Central South UniversityChangsha410083China Department of Civil Engineering Monash UniversityMelbourne3800Australia Oulu Mining School University of OuluOuluFI-90014Finland

In the engineering practices,it is increasingly common to encounter fractured rocks perturbed by temperatures and frequent dynamic *** this paper,the dynamic behaviors and fracture characteristics of red sandstone considering temperatures(25℃,200℃,400℃,600℃,and 800℃)and fissure angles(0°,30°,60°,and 90°)were evaluated under constant-amplitude and low-cycle(CALC)impacts actuated by a modified split Hopkinson pressure bar(SHPB)***,fracture morphology and second-order statistics within the grey-level co-occurrence matrix(gLCM)were examined using scanning electron microscopy(SEM).Meanwhile,the deep analysis and discussion of the mechanical response were conducted through the synchronous thermal analyzer(STA)test,numerical simulations,one-dimensional stress wave theory,and material *** multiple regression models between response variables and interactive effects of independent variables were established using the response surface method(RSM).The results demonstrate the fatigue strength and life diminish as temperatures rise and increase with increasing fissure angles,while the strain rate exhibits an inverse ***,the peak stress intensification and strain rate softening observed during CALC impact exhibit greater prominence at increased fissure *** failure is dominated by tensile damage with concise evolution paths and intergranular cracks as well as the compressor-crushed zone which may affect the failure mode after 400℃.The second-order statistics of gLCM in SEM images exhibit a considerable dependence on the ***,thermal damage dominated by thermal properties controls the material structure and wave impedance and eventually affects the incident wave *** tensile wave reflected from the fissure surface is the inherent mechanism responsible for the angle effect exhibited by the fatigue strength and ***,the peak stress intensification and strain rate softening during impact are determ

关键词： Red sandstone Temperature Fissure Constant-amplitude and low-cycle(CALC) impact Fatigue failure Response surface method(RSM)

Anthropogenic mineral generation and its potential resource supply:The case of niobium

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第8期67卷 2583-2591页

作者： Xianlai ZENg Moisés gómez Mahmoud BAKRY Yong gENg Jinhui li School of Environment Tsinghua UniversityBeijing 100084China School of Environmental Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China School of International and Public Affairs Shanghai Jiao Tong UniversityShanghai 200030China

The strategy of carbon neutrality is reshaping the global landscape of resource flow and *** the final sink of geological minerals,the proliferated anthropogenic minerals,also called secondary resources,play an increasingly important role in resource supply *** is a critical metal that lacks full concern for its *** fundamental principle of niobium circularity is to recycle and maintain the material as close to the manufacturing process as *** we estimate the niobium-containing applications lost at their end-of-life,underscoring the imperative to minimize such ***,we elucidate the extraction processes for scrap and alloy quantities throughout the industry's *** from anticipated waste generated by the majority of niobium applications,a forecast indicates a potential loss of approximately 168 kt by 2090 in the absence of ***,with a recycling efficiency of 90%for niobium,the projected loss diminishes to approximately 16 *** delve into the significance of niobium's circular economy and explore various aspects that demand further investigation for a seamless transition from linear to circular practices.

关键词： Niobium Anthropogenic mineral Circular economy Recycling Sustainability

Assessing Moroccan physician knowledge and practices regarding maternal obesity's impact on childhood obesity:Implications for prevention and intervention

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Pediatrics 2024年第2期13卷 146-160页

作者： Imane Douiyeh Jihane Khamlich Naima Nabih Asmae Saih Ilham Boumendil Anas Regragui Anass Kettani Amal safi Laboratory Biochemistry Environment and Agri-food Department of BiologyFaculty of Science and Technics MohammediaHassanⅡUniversity CasablancaMohammedia 28806Morocco Department of Biology Faculty of Sciences Ben M’Sik HassanⅡUniversity of CasablancaCasablanca 20000Morocco Department of Medical ACHAS Association of the Doctors Ain Chock Casablanca MoroccoCasablanca 20400Morocco Department of Medical HassanⅡUniversityCasablanca 20400Morocco

BACKgROUND Childhood obesity is a growing global concern with far-reaching health *** study focuses on evaluating the knowledge and practices of physicians in Morocco regarding the link between maternal obesity and childhood *** the increasing prevalence of childhood obesity worldwide,this issue remains inadequately addressed in the Moroccan *** To assess the awareness and practices of physicians in Morocco concerning the connection between maternal obesity and childhood *** The research encompasses a comprehensive survey of practicing physicians,revealing significant gaps in awareness and practices related to maternal *** Notably,a significant portion of doctors do not provide adequate guidance to overweight pregnant women,highlighting the urgency for targeted educational *** In conclusion,this research illuminates critical areas for improvement in tackling childhood obesity in *** addressing these gaps,fostering awareness,and enhancing medical practices,the healthcare system can contribute significantly to preventing childhood obesity and improving the overall health of future generations.

关键词： Childhood obesity Maternal obesity Management Prevention Screening

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： Y.Fu g.g.Wang A.Hu Y.li K.B.Thacker J.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(SY)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

Semi-automated detection of rangeland runoff and erosion control berms using high-resolution topography data

在线全文

学校读者我要写书评

暂无评论

International Soil and Water Conservation Research 2024年第1期12卷 217-226页

作者： li li Changjiang River Scientific Research Institute of Changjiang Water Resources Commission Wuhan430010China Research Center on Mountain Torrent&geologic Disaster Prevention Ministry of Water ResourcesWuhan430010China University of Arizona School of Natural Resources and the EnvironmentTucsonAZ85719USA

An inventory of topographic modifications is essential to addressing their impacts on hydrological and morphological processes in human-altered ***,such inventories are generally *** study presents two workflows for semi-automatic detection of linear earthen runoff and erosion control berms in rangelands using high-resolution topographic *** workflows consist of initial object identification by applying either morphological grayscale reconstruction(MgR)or the geomorphon(gEO)method,followed by identification refinements through filters based on objects’horizontal and vertical *** sites were selected within the Altar Valley,Arizona,in the southwestern United *** site was used for developing workflows and optimizing filter thresholds,and the other two sites were used to validate *** results showed that:1)The MgR-based workflow methodology could produce final precision and detection rates of up to 92%and 75%,respectively,and take less than 5 s for a 10.1 km^(2) site;2)The workflow based on the MgR method yielded greater identification accuracy than did the gEO workflow;3)Object length,orientation,and eccentricity were important characteristics for identifying earthen berms,and are sensitive to general channel flow direction and berm shape;4)Manual interrogation of topographic data and imagery can significantly improve identification precision *** proposed workflows will be useful for developing inventories of runoff and erosion control structures in support of sustainable rangeland management.

关键词： Earthen berm Rangeland grayscale morphological reconstruction geomorphon liDAR

Heterogeneous Catalysis with Metal-Containing Crystalline Porous Materials:Element-and Site-Specific Insights

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CCS Chemistry 2024年第5期6卷 1110-1129页

作者： Yan li Andrew g.Walsh Peng Zhang Tianjun Zhang State Key Laboratory of New Pharmaceutical Preparations and Excipients College of Chemistry and Materials ScienceHebei UniversityBaoding 071002 Department of Chemistry Dalhousie UniversityHalifaxNova Scotia B3H 4R2

Metal-containing crystalline porous materials(CPMs)are gaining popularity in heterogeneous catalysis because of their highly crystalline and porous systems,and their excellent chemical *** of the metal species and framework structure permits them to have greater activity,selectivity,and stability over other *** in-depth understanding of the complex nature of metal active sites in CPMs is essential for revealing the structure-performance relationships and directing the rational design of such *** to conventional characterization techniques,the rapid development of X-ray absorption spectroscopy(XAS)has provided element-and site-specific deep insights into the electronic and structural information of metal species in *** such,this review begins by summarizing novel XAS techniques and analysis methods in accurately obtaining such ***,the combination of XAS with other high-level characterization methods into disclosing the configuration of active sites in metalcontaining CPMs is ***,the utilization of theory-assisted XAS data analysis in examining complex metal-containing CPM catalysts is ***,advanced in-situ/operando XAS studies into revealing the working sites in metal-containing CPMs under catalytic conditions are *** conclude by outlining the future challenges and prospects of XAS measurements,data analyses,and in-situ/operando setups in advancing the study of metal-in-CPM catalysts.

关键词： X-ray absorption spectroscopy in-situ metal species crystalline porous materials heterogeneous catalysis

Effects of mid-passage gap with a variable surface angle on a turbine vane endwall’s aerothermal and film cooling performances

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第6期37卷 20-37页

作者： Zhiyu li Kaiyuan ZHANg Zhigang li Jun li Institute of Turbomachinery Xi’an Jiaotong UniversityXi’an 710049China

The mid-passage gap is an inevitable structure in a vane passage due to turbine vanes being manufactured *** coolant from this gap is able to prevent hot mainstream ingression and provide cooling protection for the endwall.A novel idea of enlarging the endwall’s coverage area and reducing the endwall’s thermal load by applying the mid-passage gap with variable surface angles is carried out in this *** endwall’s aerothermal and film cooling performances under four mid-passage gap modes at three typical mass flow ratio conditions are numerically *** indicate that under the traditional mid-passage mode,the coolant flows into the mainstream with a perpendicular incidence angle and can’t stick to the ***,cooling failure occurs,and the endwall’s thermal load is badly *** film cooling level at the suction-side endwall is improved when applying the mid-passage gap of a 45surface angle due to the secondary vortex being *** addition,when applying the mid-passage gap of a 135surface angle,the horseshoe vortex is pushed away,and the coverage area at the pressure-side endwall is enlarged *** best film cooling performance is achieved when the upstream surface angle is 135and the downstream surface angle is 45due to the adiabatic film cooling effectiveness being increased at both the pressure-and suction-side *** the mass flow ratio is 1.5%,the coverage area is enlarged by 43%,and the area-averaged adiabatic film cooling effectiveness is increased by 37%,when compared with those under the traditional mid-passage mode.

关键词： Film cooling Heat transfer Surface angle Mid-passagegap Turbinevane endwall

Perturbed low-thrust geostationary orbit transfer guidance via polynomial costate estimation

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第3期37卷 181-193页

作者： Zhao li Hengnian li Fanghua JIANg Junfeng li State Key Laboratory of Astronautic Dynamics Xi’an Satellite Control CenterXi’an 710043China School of Aerospace Engineering Tsinghua UniversityBeijing 100084China

This paper proposes an optimal,robust,and efficient guidance scheme for the perturbed minimum-time low-thrust transfer toward the geostationary *** Earth’s oblateness perturbation and shadow are taken into *** is difficult for a Lyapunov-based or trajectory-tracking guidance method to possess multiple characteristics at the same time,including high guidance optimality,robustness,and onboard computational *** this work,a concise relationship between the minimum-time transfer problem with orbital averaging and its optimal solution is identified,which reveals that the five averaged initial costates that dominate the optimal thrust direction can be approximately determined by only four initial modified equinoctial orbit elements after a coordinate *** on this relationship,the optimal averaged trajectories constituting the training dataset are randomly generated around a nominal averaged *** polynomial regression models are trained on the training dataset and are regarded as the costate *** the transfer,the spacecraft can obtain the real-time approximate optimal thrust direction by combining the costate estimations provided by the estimators with the current state at any ***,all these computations onboard are *** simulation results show that the proposed guidance scheme possesses extremely high guidance optimality,robustness,and onboard computational efficiency.

关键词： Low thrust Orbital transfer Trajectory optimization guidance Indirect method Orbital averaging Machine learning geostationary satellites

Theoretical Analysis of Cooperative Driving at Idealized Unsignalized Intersections

在线全文

学校读者我要写书评

暂无评论

Tsinghua Science and Technology 2024年第1期29卷 257-270页

作者： Shen li Jiawei Zhang Zhenwu Chen li li Department of Civil Engineering Tsinghua UniversityBeijing 100084China Department of Automation Tsinghua UniversityBeijing 100084China Shenzhen Urban Transport Planning Center Co. Ltd.Shenzhen 518000China

Cooperative driving is widely viewed as a promising method to better utilize limited road resources and alleviate traffic *** recent years,several cooperative driving approaches for idealized traffic scenarios(i.e.,uniform vehicle arrivals,lengths,and speeds)have been ***,theoretical analyses and comparisons of these approaches are *** this study,we propose a unified group-by-group zipper-style movement model to describe different approaches synthetically and evaluate their *** derive the maximum throughput for cooperative driving plans of idealized unsignalized intersections and discuss how to minimize the delay of *** obtained conclusions shed light on future cooperative driving studies.

关键词： cooperative driving connected and automated vehicles unsignalized intersection