检索结果-南通市图书馆

Analysis for twinning and slip in face-centered cubic crystals under axisymmetric co-deformation

science China(Technological sciences) 2006年第5期49卷 521-536页

作者： CHEN Zhiyong1,2, CAI Hongnian1, ZHANG Xinming2, WANG Fuchi1 & TAN Chengwen1,3.1. school of material science and {3., beijing Institute of Technology, beijing 100081, China 2. school of material science and {3., Central South university, Changsha 410083. China 3. school of material science and engineering, beijing university of aeronautics and astronautics, beijing 100083. China school of material science and {3. Beijing Institute of Technology Beijing China school of material science and {3. Central South University Changsha China school of material science and {3. Beijing University of Aeronautics and Astronautics Beijing China

The maximum work principle of Bishop-Hill was developed to analyze the axisymmetric co-deformation in face-centered cubic crystals (f.c.c.) for twinning on {111} 112 and slip on {111} 110 systems. The influence of ξ , the ratio of critical re- solved shear stress for twinning to slip, on the yield stress states and corresponding active slip or/and twinning systems for orientations in the standard stereographic triangle of cubic crystal was investigated systematically. The Taylor factors and the anisotropy of yield strength for three important orientations [100], [110] and [111] in orientation space were analyzed. It is found that the yield strength asymmetry for the case of axisymmetric de- formation of tension and compression can be explained based on the microscopic theory of crystal plasticity. The concept of orientation factor for twinning ability was proposed and the deformation mechanism map in the orientation space was established for the case of axisymmetric deformation. The deformation texture formation and development of f.c.c. crystals with low stacking fault energy for axisymmetric tension can be explained qualita- tively on the basis of analyzed results.

关键词： twinning slip face-centered cubic crystals axisymmetric co-deformation Bishop-Hill maximum work principle yield strength anisotropy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The mathematical model of wetting angle of heterogeneous nucleation

引用

science China(Technological sciences) 2004年第4期47卷 391-397页

作者： HUANG Cheng1, SONG Bo1, MAO Jinghong2 & ZHAO Pei3.1. school of Metallurgical and Ecological engineering, university of {3. and Technology beijing, beijing 100083. China 2. school of material {3., university of {3. and Technology beijing, beijing 100083. China 3. Central Iron and Steel Research Institute, beijing 100081, China school of Metallurgical and Ecological engineering University of Science and Technology Beijing Beijing China school of material science University of Science and Technology Beijing Beijing China Central Iron and Steel Research Institute Beijing China

The heterogeneous nucleation has been analyzed in terms of the thermodynamic theory, and the mathematical model of wetting angle of heterogeneous nucleation has been developed based on the dynamic requirements of hetero- and homogeneous nucleation. With the wetting angel model, the wetting angles of different catalysts in liquid iron have been calculated. The result shows that the wetting angle of most catalysts is smaller than 40, and the value of f() is far less than 1. The wetting angles of TiN, TiC and RE2O3.are smaller, while the wetting angle of MnO is bigger among the ordinary nucleation catalysts. The wetting angles calculated by this model are in agreement with the results of other research work.

关键词： heterogeneous nucleation, mathematical model, wetting angle, undercooling.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nonlinear Theory on Dynamic Controlling Interface Patterns DuringSolidification of a Dilute Binary Alloy

引用

International Journal of Minerals,Metallurgy and materials 1999年第4期13卷 253-258页

作者： Zidong Wang Hanqi Hu(material science and engineering {3., university of science and Technology beijing, beijing 100083. China) material science and engineering {3. University of Science and Technology Beijing Beijing 100083 China

In non-equilibrium nonlinear region, the nonlinear equations of time dependence of perturbation amplitude at the solid/liquidinterface during solidification of a dilute binary alloy are established on the base of assuming that there is local equilibrium at the solid/liquid interface and considering that curvature, temperature and composition at the solid/liquid interface which are related to the perturbation amplitude are nonlinear. As a result, patterns at the solid/liquid interface during solidification process, which is from nonsteadystate to steady state can be controlled by these nonlinear equations.

关键词： nonlinearity solidification, dilute binary alloy, dynamic control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development and Application of High Performance X80 Line Pipe for the 2^(nd) West-East Gas Pipeline

引用

Journal of Iron and Steel Research International 2011年第S1期18卷 39-48页

作者： LI He-lin 1 , HUO Chun-yong 1 , JI Ling-kang 1, 2 , LI Yang 1, 3.(1. CNPC Tubular Goods Research Institute, Xi’an 710065, China 2. . school of material science and {3., Xi’an Jiaotong university, Xi’an 710049, China 3. school of material science and engineering, university of science and Technology beijing, beijing 100083. China) CNPC Tubular Goods Res Inst Xian 710065 Peoples R China Xi An Jiao Tong Univ Sch Mat Sci & Engn Xian 710049 Peoples R China Univ Sci & Technol beijing Sch Mat Sci & Engn Beijing 100083 Peoples R China

It is the development tendency of gas pipeline to improve strength of line pipe and transmission pressure, which is an important symbol of the progress of gas pipeline technology. The 2nd West-East Gas Pipeline (the 2 nd WEGP) is the largest-scale X80 high pressure gas pipeline project in the world. Through the joint development project by Pipeline Company, research institute, and steel company, a series of achievements of technology have been obtained, which makes it possible to apply pressure of 12 MPa and X80 LSAW and HSAW pipe for the 2 nd WEGP. Specifications of X80 steel and pipe have been issued based on API 5L. High performance X80 steel and pipe have been developed and meets the Specification. General design conception of applying HSAW pipe and LSAW pipe on gas transmission trunk line with large diameter and high pressure has been established. Failure control of the 2 nd WEGP has been carried out to avoid failure and reduce the lost which based on analysis of pipeline failure mode. In this paper, research and development of high performance X80 welded pipe, establishment of technical route of joint application of HSAW and LSAW steel pipe and key technology of failure control are emphatically discussed.

关键词： 2 nd WEGP acicular ferrite failure control arrest toughness strain-based design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Relationship between Low Temperature Toughness and Microstructure in Low Activation Fe-Cr-Mn(W,V)Steel for Fusion Reactors

引用

International Journal of Minerals,Metallurgy and materials 1999年第2期13卷 111-115页

作者： Benfu Hu Chengchang jia(material science and engineering {3., university of science and Technology beijing, beijing 100083. China) material science and engineering {3. University of Science and Technology Beijing Beijing 100083 China

Fe-Cr-Mn (W, V) austenite steel was researched in order to supply a theory base for the first wall materials of fusion *** included vacuum melting, forging, annealing, solution treatment, Charpy impact tests and microstructure observation. Theresults show that the imped value decreases with the test temperature decreasing. In this system, there is ductile/brittle transition. Themechanism of this decrease of the impact value is considered to be due to γ - ε transformation in sub-stable austenite steel and stoppingoverlapping sacking fault by grain boundaries in stable austenite steel.

关键词： fusion reactor first wall materials low temperature toughness Fe-Cr-Mn system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Phenomenological Modeling of Warm Compaction and Experimental Verification

引用

International Journal of Minerals,Metallurgy and materials 2000年第4期14卷 292-295页

作者： Shiju Guo, Tao Lin (material science and engineering {3., university of science and Technology beijing, beijing 100083. China) material science and engineering {3. University of Science and Technology Beijing Beijing 100083 China

A phenomenological modeling approach to establishing the warm compaction equation and curves by modifying the regression equation of the room-temperature compaction curve is presented. An enhanced factor of compacting pressure is introduced into the equation in order to reveal the effects of powder/die temperature and filling height of powders on green density. Compaction curves yielded from this equation are consistent with the experimental data of ATOMET grade iron powders. The curves show that the powder/ die temperature should reduce as the filling heights of powders increase and that in some cases warm compaction can not give rise to a higher green density.

关键词： powder metallurgy warm compaction compaction equation materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Annealing Texture Evolution of Ti-IF Steel during Batch Annealing

引用

International Journal of Minerals,Metallurgy and materials 1998年第3期12卷 175-179页

作者： Jing Shi Xianjin Wang(material science and engineering {3., university of science and Technology beijing, beijing 100083. China) material science and engineering {3. University of Science and Technology Beijing Beijing 100083 China

Texture development and recrystallization behavior of Ti-IF steel during Batch Annealing (BA) were investigared with X-ray diffraction and EBSP in lab, and the results were compared with research work on continu ous annealing (CA) with rapid heating rate. The basic tendencies are similar that eary nucleation takes place in ND fibers, RD fibers are consumed at the end of recrystallization, and ND texture dominates over annealing texture. However, the detailed texture transformation during batch annealing is different and somewhat more compicated than tha in rapid-heating process. Moreover, misorientation plays an important role in texture transformation of BA In addition, the results of EBSP are consistent with that of ODF well.

关键词： Ti-IF steel texture batch annealing X-ray diffraction EBSP

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nonlinear Aeroelastic Response of High-aspect-ratio Flexible Wings

引用

Chinese Journal of aeronautics 2009年第4期22卷 355-363页

作者： Zhang Jian,Xiang Jinwu school of Aeronautic science and engineering,{3. university of aeronautics and astronautics,{3. 100191,China school of Aeronautic science and engineering Beijing University of Aeronautics and Astronautics Beijing 100191 China

The aeroelastic analysis of high-altitude, long-endurance （HALE） aircraft that features high-aspect-ratio flexible wings needs take into account structural geometrical nonlinearities and dynamic stall. For a generic nonlinear aeroelastic system, besides the stability boundary, the characteristics of the limit-cycle oscillation （LCO） should also be accurately predicted. In order to conduct nonlinear aeroelastic analysis of high-aspect-ratio flexible wings, a first-order, state-space model is developed by combining a geometrically exact, nonlinear anisotropic beam model with nonlinear ONERA （Edlin） dynamic stall model. The present investigations focus on the initiation and sustaining mechanism of the LCO and the effects of flight speed and drag on aeroelastic behaviors. Numerical results indicate that structural geometrical nonlinearities could lead to the LCO without stall occurring. As flight speed increases, dynamic stall becomes dominant and the LCO increasingly complicated. Drag could be negligible for LCO type, but should be considered to exactly predict the onset speed of flutter or LCO of high-aspect-ratio flexible wings.

关键词： nonlinear aeroelasticity limit-cycle oscillation Galerkin methods geometrical nonlinearities dynamic stall HALEaircraft

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Key Parameters and Conceptual Configuration of Unmanned Combat Aerial Vehicle Concept

引用

Chinese Journal of aeronautics 2009年第4期22卷 393-400页

作者： Wang Ganglin Faculty 513.school of Aeronautic science and engineering,{3. university of aeronautics and astronautics,{3. 100191,China Faculty 513 School of Aeronautic Science and Engineering Beijing University of Aeronautics and Astronautics Beijing 100191 China

The nature and characteristics of attack unmanned combat aerial vehicle （UCAV） are analyzed. The principles of selecting takeoff thrust-weight ratio and takeoff weight of attack UCAV are presented by analyzing the statistical data of weights for various main combat aircraft. The UCAV airborne weapons are analyzed, followed by the preliminary estimation of the payload weight. Various typical engines are analyzed and one of them is selected. Then the takeoff weight of the UCAV is determined. Based on some basic parameters and assumptions, the qualitative decomposition calculation for takeoff weight is completed. The key factors for obtaining longer endurance of aircraft with small aspect ratio configuration are found to be high lift-drag ratio and internal space. On the basis of the conclusions mentioned above, a highly blended flying-wing plus lifting body concept is proposed. According to this concept, the UCAV configuration is designed and optimized. Finally, the UCAV configuration with small aspect ratio, high lift-drag ratio, and high stealth characteristic is obtained.

关键词： aircraft design unmanned aerial vehicles unmanned combat aerial vehicles conceptual design aerodynamicsstealth

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stability on Finite Time interval andTime-Dependent Bifurcation Analysis ofDuffing's Equations

引用

Communications in Nonlinear science and Numerical Simulation 1999年第4期4卷 268-271页

作者： Cuncai HUA Qishan LU(school of science, beijing university of aeronautics and astronautics, {3. 100083.China) school of science Beijing Univ. Aero. and Astronaut. Beijing 100083 China

IntroductionInPhysics,Mechanicsandengineering,ChemistryandLifescienceetc.,thereealstbfforcationproblemsm***etimepassingthrought... 详细信息

IntroductionInPhysics,Mechanicsandengineering,ChemistryandLifescienceetc.,thereealstbfforcationproblemsm***etimepassingthrought...

关键词： stability on finite time interval time-dependent bifurcation Duffing’s equa-tion

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：