检索结果-南通市图书馆

Friction-reducing and antiwear behavior of metal halide-stabilized linear phosphazene derivatives as lubricants for a steel-on-steel contact

引用

Science china(Technological sciences) 2005年第3期48卷 282-291页

作者： ZHU Jiamei 1,2., LIU Weimin 2.& LIANG Yongmin 2.1. School of {3. Engineering and Technology, china University of Mining and Technology, Xuzhou 2.1008, china 2. state Key laboratory of solid Lubrication, lanzhou institute of chemical physics, chinese academy of sciences,{13., china 1. School of chemical Engineering and Technology China University of Mining and Technology 221008 Xuzhou China 2. state Key laboratory of {2. Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences 730000 Lanzhou China

A series of novel metal halide-stabilized linear phosphazene derivatives were synthesized. The friction-reducing and antiwear abilities of the resulting products as the lubricants for a steel-on-steel contact were comparatively investigated on an Optimol SRV oscillating friction and wear tester. The morphology of the worn steel surface was observed on a scanning electron microscope, while the chemical states of some typical elements on the worn steel surface were examined by means of X-ray photoelectron spectroscopy. It was found that both the side branch structures and central metals influenced the friction-reducing and antiwear behaviors of the synthetic derivatives as the lubricants, which was related to the different adsorption activities of the organic compounds composed of different organic ingredients and metallic ions on a nascent metal surface. All the synthetic lubricants except for the iron (III) derivative showed increased antiwear abilities with increasing metallic ionic radius. A protective layer originated from the tribochemical reaction together with the adsorbed boundary lubricating layer containing organic fluorine compounds, nitrogen oxide, and Fe 3.(PO 4 ) {3.plays an important role in improving the friction and wear behavior of the steel-on-steel system.

关键词： metal halide-stabilized linear phosphazene derivatives,lubricant,steel,tribological properties.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characterization and Tribological Behavior of Octadecene,Dodecene and Undecenoic Acid Films on Si Substrate

引用

Journal of Materials Science & Technology 2005年第5期21卷 671-674页

作者： Jinfang ZHOU+ and Shengrong YANGstate Key laboratory of {2. Lubrication,{3., chinese academy of sciences, lanzhou73.000, china state Key laboratory of {2. Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences Lanzhou 730000 China

The films of octadecene, dodecene, and undecenoic acid were prepared on H-terminated Si surface in the presence of ultraviolet irradiation. The resulted films were characterized with water-contact angle measurement and infrared spectroscopy. The friction-reducing behavior of the prepared films was examined on a static-dynamic friction coefficient measurement apparatus and on an atomic force microscope. It was found that all the reacted films on the Si substrate showed good friction-reducing ability; especially, the film of the octadecene exhibited the best friction-reducing ability. This was attributed to the transfer of the reacted films onto the counter face with formation of a transfer film on the counterpart surface, which led to the transformation of the sliding between the reacted films and the hard ceramic to fiat between the reacted films and its transfer film on the counterpart surface. The macroscopic and microscopic friction behaviors of the prepared films were dependent on their molecular chain lengths. Thus the octadecene reacted film with the highest degree of ordering arrangement showed the best friction-reducing and antiwear abilities in sliding against Si3.4.

关键词： Alkese Reaction film Hydrogen-terminated silicon Tribological behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation and Characterization of ZrO_2.Nanoparticles Capped by Trioctylphosphine Oxide (TOPO)

引用

Journal of Wuhan University of Technology(Materials Science) 2011年第4期26卷 611-614页

作者：马剑琪 School of Chemistry and Environmental Science Shaanxi University of Technology state Key laboratory of {2. Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences

Monodisperse ZrO2.nanoparticles capped by trioctylphosphine oxide （TOPO） were prepared in non-aqueous solvent using in-situ synthesis method. Transmission electron microscopy（TEM）, X-ray diffraction（XRD）, X-ray photoelectron spectrometer（XPS）, Fourier transformation infrared spectroscopy （FTIR）, and thermogravimetric analysis（TGA） were adopted to characterize and investigate the size, structure, composition, and the binding manners between organic capping agent TOPO and inorganic ZrO2.nanocores of the as-prepared nanoparticles. In addition, the nanoparticles were also studied to determine their solubility and relative stability. The experimental results show that the prepared nanoparticles contain about 2.% organic capping shell TOPO, 75% inorganic ZrO2.nanocores, and can be easily dissolved and be stably disersed in non-polar organic solvents.

关键词： ZrO2.nanoparticles trioctylphosphine oxide (TOPO) monodisperse solubility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The solid lubricating material experiment device for Shenzhou-7 Spaceship

引用

Science china(Technological sciences) 2010年第9期53卷 2521-2527页

作者： WANG Ke1,2.REN WeiJia1,WANG ShiDa1 & WENG LiJun3.1 academy of Opto-Electronics,chinese academy of sciences,Beijing 100190,china 2.Graduate University of chinese academy of sciences,Beijing 100049,china 3.9},chinese academy of sciences,{13. {12.,china 1. academy of Opto-Electronics Chinese Academy of Sciences Beijing 100190 China2. Graduate University of Chinese Academy of Sciences Beijing 100049 China3. Lanzhou Institute of Chemical Physics Chinese Academy of Sciences Lanzhou 730000 China

A solid lubricating material exposure experiment in space is one of the missions during the seventh manned spaceflight of china,and the key is to develop a device which can be fixed reliably outside of the orbital module and can be fetched conveniently by an astronaut during space *** solid lubricating material experiment device needs to be locked reliably in a vibrating and impacting environment during the launch phase,and should meet the requirement that it can be unlocked and fetched reliably by the astronaut wearing an extravehicular spacesuit via simple operations in orbit in an environment of high and low *** for the device we developed,the environmental characteristic of the mission was analyzed,the mechanical analysis and thermal analysis were carried out,and then a mechanism with functions of mechanical locking,structural self-locking and manual unlocking was *** device was verified by a sequence of experiments and was fetched by the astronaut during the flight of the Shenzhou-7 Spaceship.

关键词： manned spaceflight exposure experiment mechanism unlock

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Wear Behavior of Cu Matrix Composites Reinforced with Mixture of Carbon and Carbon Nanotubes

引用

Journal of Wuhan University of Technology(Materials Science) 2009年第2期24卷 254-257页

作者：姜金龙 School of Science Lanzhou University of Technology state Key laboratory of {2. Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences

In order to improve wear resistance and decrease the cost, carbon and carbon nanotubes reinforced copper matrix composites were fabricated by the power metallurgy method. The effects of carbon （carbon and carbon nanotubes） volume fraction and applied load on the friction coefficient and wear rate under dry sliding of the composites were investigated at room temperature. By scanning electron microscopy （SEM）, the worn surfaces and debris were observed, and wear mechanism was also analyzed and discussed. The experimental wear process consists of the run-in, steady wear and severe wear process with the increasing of sliding distance. Both the friction coefficient and wear rate of the composites first decrease and then increase with the increasing of carbon volume fraction. The minimum friction coefficient and wear rate are obtained when carbon is 4.0vo1%. The wear mechanisms of the composites change from the adhesive wear and delamination wear to abrasive wear with the increasing of carbon volume fraction.

关键词： C/Cu matrix composite power metallurgy wear behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure and Wear Resistance Evolution of HVOFSprayed WC-(W,Cr)_2.-Ni Coating with Post Heat Treatment In Air Atmosphere

引用

稀有金属材料与工程 2012年第S1期41卷 388-393页

作者： Hou Guoliang1,2.Zhou Huidi1,An Yulong1,2.Liu Guang1,2.Chen Jianmin1,Chen Jie1,2.1 state Key laboratory of {2. Lubrication,lanzhou institute of chemical physics,chinese academy of {13.,lanzhou 73.000,{12. 2.Graduate University,chinese academy of {13.,Beijing 100049,{12. chinese Acad Sci Lanzhou Inst Chem Phys State Key Lab Solid Lubricat Lanzhou 730000 Peoples R China chinese Acad Sci Grad Univ Beijing 100049 Peoples R China

WC-(W,Cr)2.-Ni coating was prepared on 1Cr18Ni9Ti stainless steel and C-2.6 Ni-base Hastelloy by high velocity oxy-fuel(HVOF)*** effect of post heat treatment in air atmosphere on the microstructure,phase composition,microhardness,fracture toughness,and wear resistance of HVOF-sprayed WC-(W,Cr)2.-Ni coating was *** microstructure and phase composition of the coatings were analyzed by means of field emission scanning electron microscopy(FESEM)and X-ray diffraction(XRD).The microhardness and fracture toughness of the coatings were measured using a microhardness tester and a Vickers hardness ***,dry friction and wear behavior of the coatings sliding against Si3.4 ball was investigated using an oscillating friction and wear tester;and the worn surfaces of the coatings were analyzed by means of scanning electron microscopy(SEM).It was found that heat treatment within 500-800°C resulted in crystallization of amorphous phase in as-sprayed coating,generating nanoscale new phases such as NiWO4,CrWO4 and ***,heat treatment led to increase of the microhardness of as-sprayed coating,and the highest microhardness was obtained after heat treatment at 800°*** fracture toughness and wear resistance of the as-sprayed coating increased with increasing heat treatment temperature up to 700°C but tended to decrease with further elevating *** other words,the mechanical properties and wear resistance of the as-sprayed coatings were worsened owing to excessive growth of oxidation grains and depletion of ductile Ni binder after heat treatment above 700°*** it was suggested that as-sprayed ceramic composite coating should be post heat treated in air at a moderate temperature of 700°C so as to achieve the optimized mechanical properties and wear resistance.

关键词： HVOF WC-(W,Cr)2.-Ni coating post heat treatment microstructure wear resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Patterned self-assembled film guided electrodeposition

引用

Science china Chemistry 2004年第2期47卷 120-125页

作者： ZHOU Feng1, LI Bin1,2. XU Tao1, CHEN Miao1, HAO Jingcheng1 & LIU Weimin1 1. state Key laboratory of {2. Lubrication, lanzhou institute of chemical physics, chinese academy of sciences, lanzhou 73.000, china 2. Department of Chemistry, Shandong institute of Education, Jinan 2.0014, china 1. state Key laboratory of {2. Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences 730000 Lanzhou China 2. Department of Chemistry Shandong Institute of Education 250014 Jinan China

The paper describes the fabrication of polypyrrole (PPy) microstructures through patterned self-assembled film guided electrodeposition. Thus the patterned self-assembled monolayer is prepared by microcontact printing (μCP) and used as the template in the electrodeposition of PPy. It has been found that the self-assembled monolayer plays completely different roles on different substrates in directing the deposition of the PPy. Namely, the electrodeposition mainly occurs on the exposed area of the gold substrates patterned with dodecanethiol (DDT) and octadecanelthiol (ODT) and on the indium tin oxide (ITO) substrate patterned with octadecyltrichlorosilane (OTS), while PPy nucleates on the OTS covered area and no deposition is found on the exposed area of a semiconductor substrate (silicon). This is attributed to the co-operative effect between the substrate conductivity and the compatibility of the PPy oligomerwith the covered or exposed area of the substrate surface.

关键词： pattern, conducting polymer, microcontact printing, electrodeposition.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Asymmetric Catalytic Hydrogenation Using Rhodium Diphosphinites Derived From D-glucose and D-mannitol

引用

chinese chemical Letters 2000年第7期11卷 587-588页

作者： Peng JIANG Shi Jie LU(state Key laboratory of Oxo Synthesis and Selective Oxidation,{2.,{3., lanzhou 73.000) chinese Acad Sci Lanzhou Inst Chem Phys State Key Lab Oxo Synth & Select Oxidat Lanzhou 730000 Peoples R China

Three diphosphinites were synthesized for preparing rhodium-diphosphinite complexes. The complexes were used for asymmetric catalytic hydrogenation of amino acid precursor alpha-acetamidocinnamic acid and its methyl e... 详细信息

关键词： asymmetric catalysis hydrogenation rhodium diphosphinites alpha-acetamidocinnic acid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on growth and properties of novel γ-LiAlO_2.substrate

引用

Science china(Technological sciences) 2006年第2期49卷 188-193页

作者： ZOU Jun1,2. ZHOU Shengming1, XU Jun1 & ZHANG Rong3.1. Shanghai institute of Optics and Fine Mechanics, chinese academy of sciences, Shanghai 2.1800,{2. 2. Graduate School of chinese academy of sciences, Beijing 10003.,{2. 3. laboratory of solid state Microstructures and Department of physics, Nanjing University, Nanjing 2.0093.{2. 1. Shanghai institute of Optics and Fine Mechanics Chinese Academy of Sciences Shanghai 201800 China 2. Graduate School of chinese academy of sciences Beijing 100039 China 3. laboratory of solid {2. Microstructures and Department of {3. Nanjing University Nanjing 210093 China

Transparent γ-LiAlO2.single crystal has been grown by Temperature Gradient technique. The surface of the wafer annealed in O2.atmosphere at 1100°C for 70 h became opaque and Li-poor phase (LiAl5O8); while, that annealed in Li-rich atmosphere kept transparent and smooth. The full-width at half maximum value dropped to 3. arcsecs when the wafer was annealed in Li-rich atmosphere. That annealed in O2.atmosphere increased to 78 arcsec. Compared with absorption spectra, we can conclude that the 196 nm absorption peak was caused by Li vacancies and the 73. nm peak was caused by O vacancies.

关键词： γ-LiAlO2 crystal, scanning electron micrograph (SEM), absorption spectra.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Physical mechanisms of plant roots affecting weathering and leaching of loess soil

引用

Science china Earth sciences 2006年第9期49卷 1002-1008页

作者： LI Yong1,2. ZHANG Qingwen1,2. WAN Guojiang3. HUANG Ronggui3. PIAO Hechun3. BAI Lingyu2.& LI Lu2.1. state Key laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, {2. of Soil and Water Conservation, chinese academy of sciences, Yangling 712.00, china 2. {2. of Agro-Environment and Sustainable Development, chinese {13. of Agricultural sciences, Beijing 100081, china 3. {2. of Geochemistry, chinese academy of sciences, Guiyang 550002. china 1. state Key laboratory of Soil Erosion and Dryland Farming on the Loess Plateau Institute of Soil and Water Conservation Chinese Academy of Sciences Yangling 712100 China 2. institute of Agro-Environment and Sustainable Development Chinese Academy of Agricultural Sciences Beijing 100081 China 3. institute of Geochemistry Chinese Academy of Sciences Guiyang 550002 China

Plant roots have potential impacts on soil mineral weathering and *** objective is to understand the physical mechanisms of plant roots affecting weathering andleaching of loess soil. Root densities were measured through the method of a large-size dug profile,and transport fluxes of soil elements were determined using an undisturbed monolith soilinfiltration device on the hilly and gully regions of the chinese Loess Plateau. The results showthat the improvement effects of soil environment by plant roots are mainly controlled by the densityand weight of the fibrous roots with the diameters less than 1 mm. Plant roots have the strongereffects on soil physical properties than chemical properties. The principal components analysis(PCA) indicates that soil physical properties by plant roots account for 56.7% of variations in soilenvironment whereas soil chemical properties and pH contribute about {3..{3. of the soil *** roles of plant roots in controlling soil weathering and leaching increased in the followingorder: infiltration enhancement > increase of bio-active substance > stabilization of soilstructure. The effects of plant roots on soil mineral weathering and leaching can be quantifiedusing the multiple regression models with the high prediction accuracies developed in this study.

关键词： plant roots, soil weathering and leaching rates, soil environment field, principal components analysis (PCA), chinese Loess Plateau.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：