检索结果-南通市图书馆

Dehydration melting of solid amphibolite at 2.0 GPa: Effects of time and temperature

Science china Earth Sciences 2005年第8期48卷 1120-1133页

作者： ZHOU Wenge1, XIE Hongsen1, LIU Yonggang1, ZHENG Xiaogang1, ZHAO Zhidan2.& ZHOU Hui3.1. Laboratory of Material in the Earth’s Interior, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002. china {3., china University of geosciences, beijing 100083, china 3. department of geology, Peking University, beijing 100871, china Laboratory of Material in the Earth’s Interior Institute of Geochemistry Chinese Academy of Sciences Guiyang China department of geology China University of Geosciences Beijing China department of geology Peking University Beijing China

Two sets of dehydration-melting with a natural solid amphibolite, collected from North Himalayan structure zone, Tibet, have been carried out in multi-anvil apparatus at 2.0 GPa and 800―1000℃, for 12.2.0 h. One is keeping the pressure at 2.0 GPa and the annealing time of 12.h, changing the temperature (800―1000℃). The other is keeping the pressure at 2.0 GPa and temperature at 850℃, varying the annealing time (12.2.0 h). The products are inspected with microscope and electron probe. The results indicate that at 2.0 GPa, annealing time of 12.h, garnets, melts and clinopyroxenes occur in amphibolite gradually with increasing temperature and the chemical compositions of melt vary from tonalite to granodiorite, and then to tonalite. However, at 2.0 GPa and 850℃, with the annealing time increasing, the garnets, melts and cli-nopyroxenes also occur in amphibolite gradually and the chemical compositions of melt vary from tonalite to granodiorite. In both cases, melts interconnect with each other when the contents of melt are over the 5 vol.%. the viscosities of the melt produced in amphibolite at temperature higher than 850℃ are on a level with 104 Pa·s. The interconnected melt with such a viscosity may segregate from the source rock and form the magma over reasonable geological time. Therefore, it is believed that at the lower part of the overthickened crust, the tonlitic and grano-dioritic magma may be generated through the dehydration melting of amphibolite.

关键词： solid amphibolite, high pressure, high temperature, time, partial melting.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Petrogenesis of Songshugou dunite body in the Qinling orogenic belt, Central china: Constraints from geochemistry and melt inclusions

引用

Science china Earth Sciences 2005年第8期48卷 1146-1157页

作者： SU Li1,2. SONG Shuguang3.& ZHOU Dingwu1 1. Key Laboratory of Continental Dynamics of the Ministry of Education, department of geology, Northwestern University, Xi’an 710069,{2. 2. The Geological Lab Center,{2. University of geosciences (beijing), beijing 100083,{2. 3. Key Laboratory of Orogenic Belts of the Ministry of Education, department of geology, Peking University, beijing 100871,{2. Key Laboratory of Continental Dynamics of the Ministry of Education Department of Geology Northwestern University Xi’an China The Geological Lab Center China University of Geosciences (Beijing)Beijing China Key Laboratory of Orogenic Belts of the Ministry of Education Department of Geology Peking University Beijing China

The Songshugou dunite body, which occupies an area of about 2. km2. is the largest ultramafic massif in the eastern Qinling orogenic belt, Central china. The major compo-nent of this body is dunitic rocks including mylonitic dunite and coarse-grained dunite; they oc-cupy about 95 vol% of the total body. Petrography, mineral composition, major and trace ele-ments and primitive melt inclusions have been investigated in this paper; all revealed that this dunite body is the product of melt-rock interaction by porous percolation flow. In comparison with dunite sills or veins in harzburgite from the basal part of Oman ophiolite, this dunite body is characterized by lower contents of Al2.3. CaO and HREE but higher content of highly incom-patible elements and Zr and Hf. The LREE enriched patterns and primitive mantle normalized spidergrams of trace elements are also different from the Oman dunite. Combining with melt in-clusions observed in olivines, we conclude that this dunite body is the product of large- scale porous percolation flow of high-MgO melts within depleted mantle peridotites. The high-MgO magma, in essence, was most probably produced at the hot head of an upwelling mantle plume. The occurrence of the Songshugou dunite body is closely associated with the activity of mantle super-plume in Neo-Proterozoic era in the Yangtze Craton.

关键词： Songshugou dunite body, geochemistry, melt inclusion, mantle plume, Qinling orogenic belt.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanism for calcite dissolution and its contribution to development of reservoir porosity and permeability in the Kela 2.gas field,Tarim Basin,china

引用

Science china Earth Sciences 2008年第4期51卷 567-578页

作者： YU BingSong1,3. DONG HailLiang2.3.& RUAN Zhuang1,3.1 State Key Laboratory of Geological Processes and Mineral Resources, china University of geosciences,{2., china 2.department of geology, Miami University,Oxford, OH 45056, USA 3.Geomicrobiology Laboratory, china University of geosciences, beijing, 100083, china State Key Laboratory of Geological Processes and Mineral Resources China University of Geosciences Beijing China Geomicrobiology Laboratory China University of Geosciences Beijing China department of geology Miami University Oxford USA

This study is undertaken to understand how calcite precipitation and dissolution contributes to depth-related changes in porosity and permeability of gas-bearing sandstone reservoirs in the Kela 2.gas field of the Tarim Basin, Northwestern china. Sandstone samples and pore water samples are col-lected from well KL2.1 in the Tarim Basin. Vertical profiles of porosity, permeability, pore water chem-istry, and the relative volume abundance of calcite/dolomite are constructed from 3.00 to 4000 m below the ground surface within major oil and gas reservoir rocks. Porosity and permeability values are in-versely correlated with the calcite abundance, indicating that calcite dissolution and precipitation may be controlling porosity and permeability of the reservoir rocks. Pore water chemistry exhibits a sys-tematic variation from the Na2.O4 type at the shallow depth (3.00-3.3. m), to the NaHCO3.type at the intermediate depth (3.3.―3.95 m),and to the CaCl2.type at the greater depth (3.2.―3.3. m). The geochemical factors that control the calcite solubility include pH, temperature, pressure, Ca2. concen-tration, the total inorganic carbon concentration (ΣCO2., and the type of pore water. Thermodynamic phase equilibrium and mass conservation laws are applied to calculate the calcite saturation state as a function of a few key parameters. The model calculation illustrates that the calcite solubility is strongly dependent on the chemical composition of pore water, mainly the concentration difference between the total dissolved inorganic carbon and dissolved calcium concentration (i.e., [ΣCO2. -[Ca2.]). In the Na2.O4 water at the shallow depth, this index is close to 0, pore water is near the calcite solubility. Calcite does not dissolve or precipitate in significant quantities. In the NaHCO3.water at the intermedi-ate depth, this index is greater than 0, and pore water is supersaturated with respect to calcite. Massive calcite precipitation was observed at this depth interval and

关键词： calcite dissolution porosity thermodynamic Tarim Basin

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The role of aerial algae in the formation of the landscape of the Yunnan Stone Forest,Yunnan Province, china

引用

Science china Earth Sciences 2004年第9期47卷 846-864页

作者： TIAN Youping1,3. ZHANG Jie2. SONG Linhua1 & BAO Haosheng2.1. Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, beijing 100101,{3. 2. {2. of Geography, Nanjing University, Nanjing 2.0093.{3. 3. School of Earth Sciences and Resources,{3. University of geosciences, beijing 100083,{3. Institute of Geographic Sciences and Natural Resources Research Chinese Academy of Sciences Beijing China School of Earth Sciences and Resources China University of Geosciences Beijing China department of Geography Nanjing University Nanjing China

Aerial algae on the surface of carbonate rocks at the Stone Forest, Shilin County, Yunnan Province, china, and their bioerosion were investigated in the field and studied in the laboratory in detail. Through the observation, identification and statistics of more than one hun- dred algal samples and rock samples with the optical microscopes (stereomicroscope, biological microscope) and the scanning electronic microscope (SEM), the relationships between erosional forms on the surface of the Stone Forest and algae and/or algal communities and the genetic mechanism for the formation of erosional forms were analyzed. It is suggested that aerial algae play an active role in bioerosive processes that may affect the formation of karst erosional forms. These effects include both direct and indirect ones. The direct effect is the initiative control (algal shape-controlling role) of algae on the formation of karst forms of various scales, mostly mi- cro-scale (3.) and minor-scale (10-3.10-1m) erosional forms. The algal shape-controlling roles can be divided into the algal individual shape-controlling role and the algal community shape-controlling role. The former mostly controls the formation of micro-scale erosional forms, while the latter mostly controls the formation of micro-scale and smaller minor-scale erosional forms. The indirect effect refers to the promoting role of algae in the formation of karst forms, which may affect the formation of karst forms of all types and scales. The bioerosion of algae accelerates the weathering process of the whole Stone Forest karst landforms.

关键词： aerial algae, bioerosion, the Stone Forest, Yunnan Province, china.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Timing and history of marine hydrocarbon accumulation in Tarim craton

引用

Chinese Science Bulletin 2002年第S1期47卷 120-127页

作者： ZHAO Jingzhou~(1,2. & LI Qiming~3.1. department of Petroleum geology, Xi’an Petroleum Institute, Xi’an 710065,{2. 2. Research Institute of Petroleum Exploration and Development, Petrochina, beijing 100083,{2. 3. Tarim Oilfield Company, Kuerle, Xinjiang 841000,{2. department of Petroleum geology Xi’an Petroleum Institute Xi’an China Research Institute of Petroleum Exploration and Development PetroChina Beijing China Tarim Oilfield Company Kuerle Xinjiang China

Based on the analyses of hydrocarbon inclu-sions, K-Ar dating of authigenic illites and oil/gas-watercontact retrospection as well as other methods, the marineprimary reservoirs in the cratonic region of the Tarim Basinare found to have been formed in the late Caledonian toearly Hercynian, late Hercynian, and Himalayan, and oil andgas adjusted and redistributed in the Yanshanian (Jurassic toCretaceous) and Himalayan (Tertiary). The analyses alsoshow that the remaining primary oil accumulations aremostly formed in the late Hercynian, and the secondary oilreservoirs resulted from the adjustment and redistribution ofthe earlier accumulations during the Yanshanian and Hima-layan (especially late Himalayan), of which the Himalayan isalso the major stage of gas accumulation. The primary oilreservoirs formed in the late Hercynian mostly occur withinthe Paleozoic formation, whereas the secondary reservoirsformed in the Himalayan in the Mesozoic. The late adjust-ment and redistribution of reservoirs in the craton region ofthe Tarim Basin is ubiquitous because of the intensified tec-tonic movements since the Mesozoic, especially Cenozoic andintrusion of the high- to over-mature gas. Furthermore, thelower amplitude of reservoirs in the craton region also makesthem easier to be adjusted and redistributed. Therefore, theremaining paleo-uplift and palaeo-slope developed in rela-tively stable tectonic regions are the main potential areas forthe middle-large marine reservoirs in the Tarim Basin.

关键词： Tarim Basin craton geochronology of hydrocarbon accumulation history of hydrocarbon accumulation marine reservoir primary reservoir secondary reservoir.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Discovery of potassic spilite (or poenite) in Langshan Group of Tanyaokou District,Inner Mongolia,china

引用

Chinese Science Bulletin 1999年第6期44卷 563-567页

作者： PENG Runmindepartment of geology and Mineral Resources ,{2. University of {3., beijing 100083,{2. department of geology and Mineral Resources China University of Geosciences Beijing China

It is believed that the albite-potash-feldspar-greenschists in the middle Proterozoic Langshan Group in Tanyaokou District are synsedimentary potassic spilite （or poenite） based on the following facts and features: （ ⅰ ） they occur in beds and look blackish （or apple） green and compact; （ ⅱ ） they bear blasto-glomeroporphyritic and blastocrystalloclastic crystals which consist of （altered） albite laths with hollow skeleton crystal texture in which there are slender dark strips and minor pyroxene, and blasto-amygdaloid filled with pyrite, chlorite, magnetite, etc.; （ ⅲ ） the results of the petrochemical diagrams show that they are orthometamorphites; （ Ⅳ ） Sm-Nd isotopic age of them is 1 82. Ma (model age (tDM) is 2.006—2.13.0}Ma).

关键词： potassic spilite (or poenite) middle Proterozoic Tanyaokou Deposit Inner Mongolia.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electrical Properties of Expanded Graphite Intercalation Compounds

引用

Journal of Materials Science & Technology 2001年第3期17卷 371-374页

作者： Xiuyun CHUAN department of geology, Peking University, {2. 100871,{3. Daizhang CHEN and Xunruo ZHOU department of Materials Science,{3. University of geosciences, beijing 100083,{3. E-mail: cxyljhcj@*** Dept. of Geol. Beijing Univ. Beijing 100871 China

The intercalation compounds of CuCl2.were synthesized with expanded graphite, whose magnitude of the electrical conductivity is about 10(3.S(.)cm(-1). Their electrical conductivity is 3.similar to6 times as high as that of the expanded graphite, and about 10 times as high as that of GIC made of the non-expanded graphite. The microanalysis results of chemical compounds by X-ray energy spectrum scanning of TEM testified that the atomic ratio of chloride and cupric is nonstoichoimetric. The multivalence and exchange of electrovalence of the cupric ion was confirmed by the XPS-ESCA. Vacancy of chlorine anion increases the concentration of charge carrier. The special stage structure, made of graphite and chloride, produces a weak chemical bond belt and provides a carrier space in the direction of GIC layer. These factors develop the electrical properties.

关键词： In Ph Electrical Properties of Expanded Graphite Intercalation Compounds Graphite ESCA

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on the two and three-parameter working stability regions of 3.-TZP suspension

引用

Science china(Technological Sciences) 2006年第5期49卷 547-568页

作者： CHEN Youqiang1, 2. ZHANG Xinni3. CHEN Sha’ou3.& QI Ping3.1. department of Chemistry, Qingdao University, Qingdao 2.6071,{3. 2. department of Chemistry, Tsinghua University, beijing 100084,{3. 3. department of Physics, Qingdao University, Qingdao 2.6071,{3. department of Chemistry Qingdao University Qingdao China department of Chemistry Tsinghua University Beijing China department of Physics Qingdao University Qingdao China

We determined the variation tendency of viscosity (η) at various solids load- ing (α) for 3.-TZP suspension as a function of dispersant concentration (Cw) using vis- cosity measurement, measured the diameter of particles as a function of Cw in very dilute suspension using light scattering method, and obtained the surface features of the sedi- ment of suspension with different Cw using SEM. We also discussed the influence of the microstructure of adsorbed polymer layers on particles and their interactions in the dis- persing medium on the stability of suspension. Then two different stable states and two different unstable states for 3.-TZP suspension were given. Accordingly, the (Cw, η), (Cw, α), and (α, η) two-parameter, and (Cw, α, η) three-parameter stability maps were con- structed. Based on the DLVO theory calculations, the dispersant concentration, particle distance (r), and interparticle potential energy (VT) maps with various solids loading for 3.-TZP aqueous suspension were also constructed. In (Cw, r) two-parameter coordinate system, the stable motion region map for particles was established. The Cw, α, and VT,max (the highest potential energy) surface of the potential barrier map was obtained through calculation and simulation on the basis of the surfaces of Cw, r, VT maps introduced above. The (Cw, α) two-parameter stability map was then obtained from the Cw, α, VT,max map. The results showed that this theoretical map can qualitatively prove the experimentally obtained results—the existence of different dispersed states of particles in suspension system and the variation tendency of suspension stability with changing each parame- ter—were reasonable.

关键词： 3.-TZP, suspension, stability, DLVO theory, interparticle potential energy.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Solving the input data in error correc-tion of optical fabrication by finite Fourier coefficient algorithm

引用

Science china(Technological Sciences) 2006年第1期49卷 50-60页

作者： CHENG Haobo1,2. SUN Guozheng3.& FENG Zhijing2.1. department of Optical Engineering, {3. Institute of Technology, {3. 100081, china 2. department of Precision Instruments and Mechanology, Tsinghua University, {3. 100084, china 3. china North Industries Group Corporation, {3. 100089, china department of Optical Engineering Beijing Institute of Technology Beijing China department of Precision Instruments and Mechanology Tsinghua University Beijing China china North Industries Group Corporation Beijing China

A free-form lens (FFL) is a special surface that is difficult to be fabricated. FFL are usually fabricated by computer-controlled optical surfacing (CCOS) technique. During CCOS, the material removal amount is determined by the unit removal function (URF) convoluting with the input data――the dwell time. When the removal amount and the URF are known, how to solve the input data involves the special algorithm――deconvolution. Usually, the input data are solved by virtue of low pass filter or iterative methods. However, an approximation solution would destroy the machining stability nec-essary to perform precisely CCOS. In this paper, to solve the input data, a new method that is based on the finite Fourier coefficient is put forward. It can give a continuous and accurate solution for fabricating choice. Several parameters are simulated, which influ-ence the process of CCOS, and evaluating on the effect of the method is also carried out. Experimental results verify that this method is suitable for guiding the manufacturing of high precision FFL.

关键词： optical fabrication, computer controlled optical surfacing, free-form lens, finite Fourier coefficient, error correction.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental remolding on the caprock's 3. strain field of the Indosinian-Yanshanian epoch in Tongling deposit concentrating area

引用

Science china Earth Sciences 2005年第7期48卷 863-874页

作者： DENG Jun1,HUANG Dinghua2.WANG Qingfei1,WAN Li1,SUN Zhongshi3.YANG Liqiang1 & GAO Bangfei1 1. State Key Laboratory of Geological Processes and Mineral Resources,china University of geosciences,{2. 100083,china 2. Faculty of Earth Sciences,china University of geosciences,Wuhan 43.074,china 3. department of Earth Sciences,Jilin University,Changchun 13.061,china State Key Laboratory of Geological Processes and Mineral Resources China University of Geosciences Beijing 100083 China Faculty of Earth Sciences China University of Geosciences Wuhan 430074 China department of Earth Sciences Jilin University Changchun 130061 China

Based on field observations and rheology analysis, we perform one analogue experiment and remold the 3. structural frame of Tongling deposit concentrating area firstly. Then we disassemble and dialyze the 3. structures of the model using the methods of "slicing" and "stripping". A series of sliced planes vertical to the fold hinges show similar landscapes of that in the drill hole profiles. Meanwhile, layer stripping analysis indicates that the deformation features of each layer in the model are qualitatively analogical to those obtained from field observations. Through contrasting the 3. structure between the experimental model and the field phenomena, we verify the following 3. deformation features of the caprock in this area: (1) the Tongling area mainly consists of three series of NE S-typed fold groups; (2. in the uniform stress field, the incoherent folds universally develop in different positions, along different axes as well as in different strata; (3. the faults propagate upward which are mostly inter-bedded detachment faults, while the fold amplitudes decrease while going deeper; and (4) the folds and cleavages are highly developed in the Silurian System indicating that the deformation effect of the Indosin-ian-Yanshanian structural layer terminates at this layer, which suggests that the Silurian System is the crucial layer for the inversion between brittle and plastic deformation domains and the underlying strata are subject to the control of another deformation system with distinct properties.

关键词： Tongling deposit concentrating area Indosinian-Yanshanian epoch 3. structural frame of the caprock analogue experiment slicing and stripping analysis structural model.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：