检索结果-南通市图书馆

Studies on the microstructure,optical and electrical properties of organic microcavity devices based on a porous silicon reflector

引用

Science china(Technological Sciences) 2005年第2期48卷 191-201页

作者： XIONG Zuhong1, FAN Yongliang2. ZHAN Yiqiang2. ZHANG Songtao2. DING Xunmin2.& HOU Xiaoyuan2.1. School of physics, Southwest china-Normal {2., Chongqing 400715, china 2. surface physics laboratory (National Key laboratory), fudan university, Shanghai 2.0433, china 1. School of physics Southwest China-Normal University 400715 Chongqing China 2. surface physics laboratory (National Key laboratory) Fudan University 200433 Shanghai China

A novel type of microcavity organic light-emitting diode based on a porous silicon distributed Bragg reflector (PS-DBR) has first been achieved and its microstructure, optical, and electrical properties have also been investigated in detail. The microcavity is made up of the central active organic multilayer sandwiched between a top silver film and a bottom PS-DBR, formed by electrochemical etching of p++-Si substrate. The field- emission scanning electron microscopy cross-section images show the nanometer-scale layered structure and flat interfaces inside the microcavity. The reflectivity (relative to an Al mirror) of the PS-DBR is up to 99%, and the stopband is about 160 nm wide. Resonant cavity mode appears as a tip in the reflectivity spectrum of the Si-based organic multilayer films, which is a symbol that the Si-based organic multilayer structure is indeed a microcavity. The peak widths of the electroluminescence (EL) spectra from the cavities emitting green and red light are greatly reduced from 85 nm and 70 nm to 8 nm and 12.nm, respectively, as compared with those measured from non-cavity structures. Note that the EL emission from the cavity devices is single-mode, and the off-resonant optical modes are highly suppressed. Moreover, increases of a factor of about 6 and 4 of the resonant peak intensity from the cavities emitting green and red light are also observed, respectively. In addition, the current-brightness-voltage characteristics and effect parameters on the lifetime of the cavity devices are also discussed. The present technique for obtaining enhanced EL emission from Si-based organic microcavity may also be another novel effective method for realizing Si-based optoelectronics device integration.

关键词： electrochemical etching, Si-based microcavity, electroluminescence, organic light-emitting diodes.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of InSb nanocrystals embedded in SiO_2.thin films

引用

Chinese Science Bulletin 1998年第19期43卷 1610-1615页

作者： ZHU Kaigui 1, SHI Jianzhong 1, WEI Yanfeng 2.and ZHANG Lide 1 1. Institute of Solid State physics, Chinese Academy of Science, Hefei 2.0031, china 2. State Key {2. of surface physics, fudan university, Shanghai 2.0433, china Institute of Solid State physics Chinese Academy of Science Hefei China State Key laboratory of surface {2. Fudan University Shanghai China

InSb nanocrystals embedded in SiO 2.thin films were prepared by rf magnetron cosputtering technique. THe observation by transmission electron microscope showed that InSb nanocrystals dispersed uniformly in SiO-2.matrices. InSb nanocrystals with different sizes can be obtained by changing the annealing condition. The average size of InSb nanocrystals depended on annealing temperature and time, but not on the t 1/3 rules. X-ray photoelectron spectroscopy and X-ray diffraction were also applied to the analyses of the composite thin films.

关键词： InSb nanocrystals radio-frequency sputtering quantum confinement.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Potential energy surfaces for low-lying electronic states of SO_2

引用

Science china Chemistry 2006年第4期49卷 289-295页

作者： LI Anyang1, SUO Bing2. WEN Zhenyi2.& WANG Yubin2.1. Shanxi Key laboratory of Physico-inorganic Chemistry, Department of Chemistry, Northwest university, Xi’an 710069,{2. 2. Institute of Modern physics, Northwest university, Xi’an 710069,{2. 1. Shanxi Key laboratory of Physico-inorganic Chemistry Department of Chemistry Northwest University Xi’an 710069 China 2. Institute of Modern physics Northwest University Xi’an 710069 China

The potential energy surfaces for the nine low-lying electronic states of SO2.have been constructed by using the multi-reference second order perturbation theory (MRPT2. with the basis set cc-pVTZ. The optimized geometries and the adiabatic excitation energies of these states are in good agreement with experiments and previous calculations. The crossings and avoided crossings dis- played in the potential energy surfaces are expounded.

关键词： cross of PES, MRPT2. SO2 (sulfur dioxide).

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Density-functional formula for strongly correlated systems

引用

Progress in Natural Science:Materials International 2005年第5期15卷 395-401页

作者： WANG Huaiyu1*, HAN Rushan2.and CHEN Nanxian1(1. Department of physics, Tsinghua university, Beijing 100084,{2. 2. Department of physics, Peking university, Beijing 100871,{2.) Department of physics Tsinghua University Beijing 100084 China Department of physics Peking University Beijing 100871 China

Density functional method is applied for strongly correlated systems. Based on the assumption that the systems are composed of electrons in singly-occupied orbitals and those in doubly-occupied orbitals, a set of self-consistent equations are obtained by standard variation procedure. The equations consist of two parts. One part is to solve the wave functions of the electrons in singly-occupied orbitals and the other is to solve the wave functions of the electrons in doubly-occupied orbitals. The physical meanings of the terms appearing in the equations are discussed.

关键词： density-functional theory strongly correlated systems doubly-occupied orbital two-particle wave function self-consistent equations.

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

I-V and C-V properties of TiO_2.thin film by pulsed-laser reactive deposition

引用

Chinese Science Bulletin 1998年第16期43卷 1344-1349页

作者： FU Zhengwen 1, ZHOU Mingfei 1, ZHANG Shengkun 2.CHEN Lianyao 2.and QIN Qizong 1 1. Laser Chemistry Institute, fudan university, Shanghai 2.0433,{2. 2. Department of physics, fudan university, Shanghai 2.0433,{2. Laser Chemistry Institute Fudan University Shanghai China Department of Pnysics Fudan University Shanghai China

TiO-2.thin films have bee deposited on p-Si(111) substrates by pulsed-laser ablation of metallic Ti target in the O-3 ambient. The current-voltage and capacitance-voltage of the Al/TiO-2.Si capacitors are measured. The results show that the dielectric constant of thin film after being annealed at 700℃ is found to be 46, and the border trap density and the interface state density at the TiO-2.p-Si interface are 1.8×10 12.cm -2.and 2.10 12.eV -1·cm -2. respectively. The conduction mechanisms of as-deposited films are also discussed.

关键词： TiO-2 dielectric properties electrical properties pulsed-laser deposition.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mathematical stencil and its application in finite difference approximation to the Poisson equation

引用

Science china Mathematics 2005年第10期48卷 1421-1429页

作者： FENG Hui~1 ZHANG Baolin~(1,2. & LIU Yang~1 1. Department of Mathematics,Wuhan university,Wuhan 430072.china 2. {2. of Computational physics,Institute of Applied physics and Computational Mathematics,Beijing 100088. china 1. Department of Mathematics Wuhan University 430072 Wuhan China 2. laboratory of Computational physics Institute of Applied Physics and Computational Mathematics 100088 Beijing China

The concept of mathematical stencil and the strategy of stencil elimination for solving the finite difference equation is presented, and then a new type of the iteration algorithm is established for the Poisson equation. The new algorithm has not only the obvious property of parallelism, but also faster convergence rate than that of the classical Jacobi iteration. Numerical experiments show that the time for the new algorithm is less than that of Jacobi and Gauss-Seidel methods to obtain the same precision, and the computational velocity increases obviously when the new iterative method, instead of Jacobi method, is applied to polish operation in multi-grid method, furthermore, the polynomial acceleration method is still applicable to the new iterative method.

关键词： mathematical stencil, stencil elimination, Poisson equation, finite difference, iterative algorithm,parallelism.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research progress in the inner surface modification of metal tubes by plasma processing

引用

Progress in Natural Science:Materials International 2006年第11期16卷 1119-1126页

作者： ZHANG Guling~ 1,2.**, WU Xingfang~1, GU Weichao~2. CHEN Guangliang~2. FENG Wenran~2. NIU Erwu~2. LI Li~2. L Guohua~2. CHEN Huan~2. FAN Songhua~2. LIU Chizi~2.and YANG Size~2.1. School of Material Science and Engineering, university of Science and Technology Beijing, Beijing 100083, china 2. Beijing National {2. for Condensed Matter physics, Institute of physics, Chinese Academy of Sciences, Beijing 100080, china) School of Material Science and Engineering University of Science and Technology Beijing Beijing 100083 China Beijing National laboratory for Condensed Matter physics Institute of Physics Chinese Academy of Sciences Beijing 100080 China

The recent progress in inner surface hardening of tubes by plasma processing is summerized. Several techniques of inner surface plasma source ion implantation and deposition are introduced, and their advantages and disadvantages are discussed. The basic principles, technical features and new progress of inner surface plasma source ion implantation methods for metal tubes, which were developed in our laboratory, are described in detail. And perspectives of the future technical development for inner surface ion implantation of tubes are presented.

关键词： PSII metal tubes inner surface surface modification.

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Calculation of maximum ground movement and deformation caused by mining

引用

中国有色金属学会会刊：英文版 2011年第S3期21卷 562-569页

作者： LI Pei-xian1, 2. TAN Zhi-xiang1, 2. DENG Ka-zhong1, 2.1. Key laboratory for Land Environment and Disaster Monitoring of State Bureau of Surveying and Mapping, china {2. of Mining and Technology, Xuzhou 2.1116, china 2. Jiangsu Key laboratory of Resources and Environmental Information Engineering, china {2. of Mining and Technology, Xuzhou 2.1116, china [a] Key laboratory for Land Environment and Disaster Monitoring of State Bureau of Surveying and Mapping China University of Mining and Technology Xuzhou 221116 China [b] Jiangsu Key laboratory of Resources and Environmental Information Engineering China University of Mining and Technology Xuzhou 221116 China

In order to know the maximum mining ground deformation of arbitrary surface point, directions of the maximum surface tilt, curvature,horizontal displacement and horizontal deformation caused by multi-working faces were deduced based on probability integral method. The distribution forms of surface deformations in all direction φ∈[0, 2.] were obtained and also equations of maximum deformations were given based on calculation of mining ground deformation in direction φ. A mining subsidence analysis system was developed with VB6.0. The system implements the probability integral mining subsidence prediction with direct integration method, and it can avoid errors of arbitrary shaped working face subdivision of traditional method, and accuracy of mining subsidence prediction can be improved with the direct integral method. The system implements the contour chart and profile chart and also data analysis automation by manipulation of the SURFER kernel function and it complements the defect of existing subsidence prediction software. Calculation of maximum deformations caused by multi-working faces mining in a coal mine of Xuzhou, china was shown as application example. Engineering application indicates that maximum deformation of mining ground surface can be calculated and analyzed by the system. The research provides a theoretical basis and calculation tool for mining subsidence prediction and analysis.

关键词： mining subsidence probability integral method movement and deformation system development

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of an impurity on 3-electron quantum dots in magnetic fields

引用

Science china(physics,Mechanics & Astronomy) 2004年第5期47卷 521-530页

作者： LIU Yimin1,2. HUANG Gangming1 & BAO Chengguang1 1. Department of physics, Zhongshan university, Guangzhou 5102.5,{2. 2. Department of physics, Shaoguan university, Shaoguan 512.05,{2. 1. Department of physics Zhongshan University 510275 Guangzhou China 2. Department of physics Shaoguan University 512005 Shaoguan China

The ground-state property of a 2.dimensional 3-electron quantum dot (QD) subjected to an external magnetic fieldB and affected by an impurity is studied. The impurity is located at thez-axis by a distanced from the plane of the dot. The evolution of the angular momentumL o and the spinS o of the ground state in accordance withB andd has been calculated, and the results are summarized and plotted in a (L o,S o) diagram. The spatial distribution of the electrons (the size and the geometric features) and the optical absorption have also been investigated. The (L o S o) diagram indicates thatL o andS o may jump whend and/orB vary. It was found that, due to the constraints arising from symmetry, each symmetric geometry is accessible only to a specific group of states having specificL o andS o.

关键词： quantum dot, ground state, charged impurity, magnetic field.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Density-functional theory study of the effect of pressure on the elastic properties of CaB_6

引用

Chinese physics B 2013年第7期22卷 420-425页

作者：韩晗 surface physics {2. (National Key {2.) Key Laboratory of Computational Physical Sciencesand Department of PhysicsFudan University

Under high pressure, the long believed single-phase material CaB6 was latterly discovered to have a new phase tI56. Based on the density-functional theory, the pressure effects on the structural and elastic properties of CaB6 are obtained. The calculated bulk, shear, and Young’s moduli of the recently synthesized high pressure phase tI56-CaB6 are larger than those of the low pressure phase. Moreover, the high pressure phase of CaB6 has ductile behaviors, and its ductility increases with the increase of pressure. On the contrary, the calculated results indicate that the low pressure phase of CaB6 is brittle. The calculated Debye temperature indicates that the thermal conductivity of CaB6 is not very good. Furthermore, based on the Christoffel equation, the slowness surface of the acoustic waves is obtained.

关键词： density-functional theory elastic properties pressure effects acoustic properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：