检索结果-南通市图书馆

The study of adsorption gas sensor based carbon nanotube film

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

science china(Technological sciences) 2005年第4期48卷 372-384页

作者： LI xin1, LIU Junhua2.& ZHU Changchun1 1. school of Electronic and Information engineering,{2., xi’an 71004., china 2. school of Electric engineering,{2., xi’an 71004., china 1. school of Electronic and Information engineering Xi’an Jiaotong University 710049 Xi’an China 2. school of Electric engineering Xi’an Jiaotong University 710049 Xi’an China

The study of gas sensitivity of multi-wall carbon nanotubes (MWNTs), which is deposited by low press chemical vapor deposition (LPCVD), is presented. The results show that the pure MWNTs are not sensitive to the gases measured, while the composite film consisting of the MWNTs and silicon dioxide is sensitive to the methane, the hydrogen and the acetylene. The MWNTs and silicon dioxide composite film have the capacitance characteristic because of the formation of Schottky junctions within the MWNTs. The chemistry adsorption of the gas measured on the surface of the MWNTs affects the space discharge area of the Schottky junction, so that the dielectric constant changes with the gas concentration. That is why the gas is sensed.

关键词： gas sensor, carbon nanotubes, low press chemical vapor deposition, scatter.

“Blocking and rebalance”mechanism-guided design strategies of bimetallic doped 2. a-phosphorus carbide as efficient catalysts for N_(2. electroreduction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 68-78,I0003页

作者： Cheng He Jianglong Ma Shen xi Wenxue Zhang State Key Laboratory for Mechanical Behavior of materials School of Materials Science and EngineeringXi'an Jiaotong UniversityXian 710049ShanxiChina school of materials {2. and engineering Chang'an UniversityXi'an 710064ShaanxiChina

Compared to single atom catalysts(SACs),the introduction of dual atom catalysts(DACs)has a significantly positive effect on improving the efficiency in the electrocatalytic nitrogen reduction reaction(NRR)which provides an environmental alternative to the Haber-Bosch ***,the research on the mechanism and strategy of designing bimetallic combinations for better performance is still in its early ***,based on"blocking and rebalance"mechanism,45 combinations of bimetallic pair dopedα-phosphorus carbide(TM_(A)TM_(B)@PC)are investigated as efficient NRR catalysts through density functional theory and machine learning *** a multi-step screening,the combinations of TiV,TiFe,MnMo,and FeW exhibit highly efficient catalytic performance with significantly lower limiting potentials(-0.17,-0.18,-0.14,and-0.30 V,respectively).Excitingly,the limiting potential for CrMo and CrW combinations is 0 V,which are considered to be extremely suitable for the NRR *** mechanism of"blocking and rebalance"is revealed by the exploration of charge transfer for phosphorus atoms in electron blocking ***,the descriptorφis proposed with machine learning,which provides design strategies and accurate prediction for finding efficient *** work not only offers promising catalysts TM_(A)TM_(B)@PC for NRR process but also provides design strategies by presenting the descriptorφ.

关键词： DACs Nitrogen reduction reaction 2. a-phosphorus carbide Inherent attributes Machine learning

Development and Application of High Performance X80 Line Pipe for the 2.(nd) West-East Gas Pipeline

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2011年第S1期18卷 39-48页

作者： LI He-lin 1 , HUO Chun-yong 1 , JI Ling-kang 1, 2., LI Yang 1, 3 (1. CNPC Tubular Goods Research Institute, xi’an 710065, china 2. . school of material science and engineering,{2., xi’an 71004., china 3. school of material science and engineering, university of science and Technology Beijing, Beijing 100083, china) CNPC Tubular Goods Res Inst Xian 710065 Peoples R China xi An Jiao Tong Univ Sch Mat Sci & Engn Xian 710049 Peoples R China Univ Sci & Technol Beijing Sch Mat Sci & Engn Beijing 100083 Peoples R China

It is the development tendency of gas pipeline to improve strength of line pipe and transmission pressure, which is an important symbol of the progress of gas pipeline technology. The 2.d West-East Gas Pipeline (the 2.nd WEGP) is the largest-scale X80 high pressure gas pipeline project in the world. Through the joint development project by Pipeline Company, research institute, and steel company, a series of achievements of technology have been obtained, which makes it possible to apply pressure of 12.MPa and X80 LSAW and HSAW pipe for the 2.nd WEGP. Specifications of X80 steel and pipe have been issued based on API 5L. High performance X80 steel and pipe have been developed and meets the Specification. General design conception of applying HSAW pipe and LSAW pipe on gas transmission trunk line with large diameter and high pressure has been established. Failure control of the 2.nd WEGP has been carried out to avoid failure and reduce the lost which based on analysis of pipeline failure mode. In this paper, research and development of high performance X80 welded pipe, establishment of technical route of joint application of HSAW and LSAW steel pipe and key technology of failure control are emphatically discussed.

关键词： 2.nd WEGP acicular ferrite failure control arrest toughness strain-based design

A theoretical model for impact protection of flexible polymer material

在线全文

学校读者我要写书评

暂无评论

Theoretical & Applied Mechanics Letters 2024年第3期14卷 217-226页

作者： Huifeng xi Hui Pan Song Chen Heng xiao MOE Key Lab of Disaster Forecast and Control in engineering School of Machanics and Construction EngineeringJinan UniversityGuangzhou 510632China Doctor Workstation of Xuwen County Guangdong Hydropower Energy Co. Ltd.Xuwen 524100China

The relationship between the protective performance of flexible polymer material and material parameters(elasticmodulus,viscosity coefficient)is explored,an impact collision motion equation between two bodies is establishedfrom the viscoelastic material constitutive,and the relationship between the kinematic response and the materialparameters is *** on the Kelvin constitutive model,a theoretical model for impact between the pro-tective body and the protected body is established,then the dynamic response is *** feasibility of themodel was verified by drop hammer experiment,and the material parameters(elastic modulus,viscosity coeffi-cient)were obtained by *** model is discretized and the relationship between local impact response andmaterial parameters is *** discussion results on the relationship between the impact response and theprotective material performance indicate that adjusting the elastic modulus,viscosity coefficient,and thicknessof the protective material can effectively improve protective effect.

关键词： Flexible polymer material Viscoelastic material Kelvin modelDynamic response Elastic modulus and viscosity coefficient

Transforming liquid flow fuel cells to controllable reactors for highlyefficient oxidation of 5-hydroxymethylfurfural to 2. 5-furandicarboxylic acid at low temperature

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 621-631,I0014页

作者： Ye Qiang xi Liu Denghao Ouyang Zhao Jiang Xuebing Zhao Key Laboratory of Industrial Biocatalysis Ministry of EducationTsinghua UniversityBeijing 100084China Institute of Applied Chemistry Department of Chemical EngineeringTsinghua UniversityBeijing 100084China school of Chemical engineering and Technology Xi'an Jiaotong UniversityXi'an 710049ShaanxiChina

Highly-efficient oxidation of 5-hydroxymethylfurtural(HMF) to 2.5-furandicarboxylic acid(FDCA) at low temperature with air as the oxidant is still ***,inspired by the respirato ry electron transport chain(ETC) of living cells mediated by electron carriers,we constructed artificial ETCs and transformed liquid flow fuel cells(LFFCs) to flexible reactors for efficient oxidation of HMF to produce FDCA under mild *** LFFC reactor employed an electrodeposition modified nickel foam as an anode to promote HMF oxidation and(VO_(2.)_(2.SO_(4) as a cathode electron carrier to facilitate the electron transfer to *** reaction rate could be easily controlled by selecting the anode catalyst,adjusting the external loading and changing the cathodic electron carrier or oxidants.A maximal power density of 44.9 mW cm^(-2. at room temperature was achieved,while for FDCA production,short-circuit condition was preferred to achieve quick transfer of *** a single batch operation with 0.1 M initial HMF,FDCA yield reached 97.1%.By fed-batch operation,FDCA concentration reached 144.5 g L^(-1) with a total yield of 96%.Ni^(2.)/Ni^(3+) redox couple was the active species mediating the electron transfer,while both experimental and DFT calculation results indicated that HMFCA pathway was the preferred reaction mechanism.

关键词： 5-Hydroxymethylfurfural 2 5-Furandicarboxylic acid Electrodeposition Electron transport chain Liquid flow fuel cell

Characterization of Fe-containing particles in Chengdu,southwest china,using single-particle aerosol mass spectrometry

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental sciences 2024年第2期136卷 110-120页

作者： Renjiang He Junke Zhang Luyao Chen Wei Zhang Yingwei xi school of Public Health Southwest Medical UniversityLuzhou 646000China Faculty of Geosciences and Environmental engineering Southwest Jiaotong UniversityChengdu 611756China Sichuan Environmental Monitoring Center Chengdu 610074China

Single-particle aerosol mass spectrometry was used to study the characteristics of Fecontaining particles during winter in Chengdu,southwest *** mass concentrations of PM_(2.5)and PM_(10)during the study period were 64±38 and 89±49μg/m~3,respectively,and NO_(2.and particulate matter were high compared with most other regions of *** Fecontaining particles were divided into seven categories with different mass spectra,sources and aging *** highest contribution was from Fe mixed with carbonaceous components(Fe-C,2..1%)*** was more mixed with sulfate than nitrate and therefore the contribution of Fe mixed with sulfate(Fe-S,2..7%)particles was higher than that of Fe mixed with nitrate(Fe-N,12.5%)*** contributions from Fe-containing particles related to primary combustion were high in the small particle size range,whereas aged Fecontaining particles and dust-related particles were mostly found in the coarse particle size *** air masses mainly originated from the west and east of Chengdu,and the corresponding PM_(2.5)concentrations were 79±36 and 55±36μg/m~3,*** west and east air masses showed stronger contributions of Fe-containing particles related to biomass burning(Fe-B)and fossil fuel combustion(Fe-C and Fe-S)particles,*** southwest area contributed the most Fe-containing *** assessments of the effects of Fe-containing particles during heavy pollution period should pay more attention to Fe-C and Fe-S ***-reduction of Fe-containing particles should consider both local emissions and short-distance transmission from the surrounding areas.

关键词： Fe-containing particles Particle composition Potential source areas Evolution Chengdu

Liquid metal biomaterials: translational medicines,challenges and perspectives

在线全文

学校读者我要写书评

暂无评论

National science Review 2024年第2期11卷 264-284页

作者： Hanchi Xu Jincheng Lu Yikuang xi Xuelin Wang Jing Liu Department of Biomedical engineering School of Medicine Tsinghua University Beijing Tsinghua Changgung Hospital School of Clinical Medicine Tsinghua University Shanghai World Foreign Language Academy Beijing Advanced Innovation Center for Biomedical engineering School of Engineering MedicineBeihang University Beijing Key Lab of Cryo-Biomedical engineering and Key Lab of Cryogenics Technical Institute of Physics and Chemistry Chinese Academy of Sciences

Until now, significant healthcare challenges and growing urgent clinical requirements remain incompletely addressed by presently available biomedical materials. This is due to their inadequate mechanical compatibility, suboptimal physical and chemical properties, susceptibility to immune rejection, and concerns about long-term biological safety. As an alternative, liquid metal(LM) opens up a promising class of biomaterials with unique advantages like biocompatibility, flexibility, excellent electrical conductivity,and ease of functionalization. However, despite the unique advantages and successful explorations of LM in biomedical fields, widespread clinical translations and applications of LM-based medical products remain limited. This article summarizes the current status and future prospects of LM biomaterials, interprets their applications in healthcare, medical imaging, bone repair, nerve interface, and tumor therapy, *** to translate LM materials into medicine and obstacles encountered in practices are *** that, we outline a blueprint for LM clinics, emphasizing their potential in making new-generation artificial organs. Last, the core challenges of LM biomaterials in clinical translation, including bio-safety,material stability, and ethical concerns are also discussed. Overall, the current progress, translational medicine bottlenecks, and perspectives of LM biomaterials signify their immense potential to drive future medical breakthroughs and thus open up novel avenues for upcoming clinical practices.

关键词： liquid metal biomaterials translational medicine clinical device healthcare therapeutics

Enhancing electrochemical capacity and interfacial stability of lithium-ion batteries through side reaction modulation with ultrathin carbon nanotube film and optimized lithium cobalt oxide particle size

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 7230-7241页

作者： Wei xi xiaogang xia Jiacheng Zhu Dehua Yang Sishen xie Beijing National Laboratory for Condensed Matter Physics and Institute of Physics Chinese Academy of SciencesBeijing 100190China school of Physical sciences University of Chinese Academy of SciencesBeijing 100049China Advanced Passivation Technology Lab College of Physics Science and TechnologyHebei UniversityBaoding 071002China

Lithium cobalt oxide(LCO),the first commercialized cathode active material for lithium-ion batteries,is known for high voltage and ***,its application has been limited by relatively low capacity and stability at high *** particle size is considered one of the most straightforward and effective strategies to enhance ion transfer,thus increasing the rate ***,side reactions are simultaneously enhanced as the specific surface area ***,we investigate the impact of LCO particles with varying size distributions and optimize the particle *** modulate the side reactions associated with particle size reduction,an ultrathin carbon nanotube film(UCNF)is introduced to coat the cathode *** this simple process and optimized particle size,the rate performance improves significantly,normal commercial LCO achieves 118 mA·h·g^(−1)at 3.0–4.3 V and 2. C(0.72.mA·h·cm^(−2.),corresponding to power density of 8732.W·kg^(−1).This method is applied to high voltage as well,152.mA·h·g^(−1)at 3.0–4.6 V and 2. C(0.99 mA·h·cm^(−2.)was achieved with high-voltage LCO(HVLCO),corresponding to power density of 11,552.W·kg^(−1).The cycling stability is also enhanced,with the capacity retention maintaining more than 96%after 100 cycles at 0.1 *** the first time,UCNF is demonstrated to suppress the excessive decomposition of the electrolytes and solvents by blocking electron injection/extraction between LCO and electrolyte *** findings provide a simple method for improving LCO rate performance,especially at high C-rates.

关键词： lithium-ion batteries lithium cobalt oxides carbon nanomaterials side reactions

Effects of hot deformation and in-situ ZrB2.particle on microstructure and tensile performance of AA7085 composite sheets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1778-1791页

作者： Jiang-jing Wu xi-zhou Kai Chuang Guan Yu-tao Zhao school of material {2. and engineering Jiangsu UniversityZhenjiang 212013JiangsuChina

To provide a new idea to reduce anisotropy for sheets in the thickness direction by microstructure modification and,mean-while,maintain or even enhance tensile performance,the in-situ ZrB2.particle/AA7085 composite sheets with thicknesses of 1,2.3,and 6 mm were *** as-cast grain size was significantly refined by the heterogeneous nucleus of the ZrB2.*** microstructure results show that severe hot deformation converts as-cast disordered microstructure into a sequential microstructure by crushing the remanent phases and matrix into a fiber *** the solid solution and aging heat treatment,the composite sheets exhibit largely recrystallized grains compared with partially recrystallized grains in the matrix sheets,and weak or even free texture exists in the *** grain size in the composite sheets decreases with the increase in thickness *** the thickness range of 1-3 mm,the composite sheets maintain a similar tensile per-formance as that in matrix sheets,while the strength and ductility in the 6-mm-thick composite sheet are improved.

关键词： Composite sheet Grain structure Texture Dislocation Strengthening