检索结果-南通市图书馆

Contributors and potential of hydrocarbon generation of source rocks by solid-state ^(13)C NMR spectroscopy

在线全文

学校读者我要写书评

暂无评论

Chinese Science Bulletin 1997年第6期42卷 478-481页

作者： WANGZhaoyun, ZHAO Changyi, CHENG Keming and LU Qinghua1. research institute of {2. Exploration and Development, china National {2. corporation, beijing 100083, china:2. University of {2., beijing, 100083 china research institute of {2. Exploration and Development China National Petroleum Corporation Beijing China University of petroleum Beijing China

SOLID-STATE 13C nuclear magnetic resonance （NMR） technique is an effective method to study the texture of material. Under the condition of high magnetic field （400 MHz） and by the application of cross polarization, magic angle spinning （CP/MAS）, total sideband suppression （TOSS）, etc., the content of different textural carbons in kerogen has been quantitatively analyzed by the solid-state 13C NMR spectroscopy of a series of kerogen of thermal simulation samples with Ro value ranging from 0.64% to 1.76%. The results show that

关键词： solid 13C NMR analysis aliphatic carbon potential of hydrocarbon generation of source rocks.

Effects of abnormally high heat stress on petroleum in reservoir——An example from the Tazhong 18 Well in the Tarim Basin

在线全文

学校读者我要写书评

暂无评论

Science china Earth Sciences 2008年第4期51卷 515-527页

作者： ZHU DongYa1, JIN ZhiJun1, HU WenXuan2.& ZHANG XueFeng3 1 petroleum Exploration and production {2., china petroleum & chemical corporation, beijing 100083, china 2.Department of Earth Sciences, Nanjing University, Nanjing 2.0093, china 3 School of Resource and Information, china University of petroleum, beijing 102.49, china petroleum Exploration and production {2. China Petroleum & Chemical Corporation Beijing China Department of Earth Sciences Nanjing University Nanjing China School of Resource and Information China University of Petroleum Beijing China

An igneous intrusion of 94m thick was discovered intruding into the Silurian sandstone from Tazhong 18 Well. The petroleum previously preserved in the Silurian sandstone reservoir was altered into black carbonaceous bitumen by abnormally high heat stress induced by the igneous intrusion. The reflec-tance of the carbonaceous bitumen reaches as high as 3.54%, indicating that the bitumen had evolved into a high thermal evolution level. Similar to the Silurian samples from the neighboring Tazhong 11, Tazhong 12. Tazhong 45 and Tazhong 47 wells, the distribution of C2., C2. and C2. steranes of the car-bonaceous bitumen is still "V" -shaped and can still be employed as an efficient parameter in oil source correlation. The "V" -shaped distribution indicates that the hydrocarbons from the Tazhong 18 and the neighboring wells were all generated from the Middle-Upper Ordovician hydrocarbon source rocks. However, the oil source correlation parameters associated with and terpanes had been changed greatly by the high heat stress and can no longer be used in oil source correlation. The δ 13C values of the pe-troleum from the neighboring wells are between -32.53‰ and -33.37‰, coincident with those of the Paleozoic marine petroleum in the Tarim Basin. However, the δ 13C values of the carbonaceous bitumen from the Tazhong 18 Well are between -2..18‰ and -2..2.‰, isotopically much heavier than the pe-troleum from the neighboring wells. The content of light hydrocarbons (nC14-nC2.) of the saturated hydrocarbon fraction in the carbonaceous bitumen is extremely higher than the content of heavy hy-drocarbons. The light/heavy hydrocarbon ratios (ΣnC2.-/ΣnC2.+) are between 4.56 and 39.17. In the saturated fraction, the even numbered hydrocarbons are predominant to the odd numbered, and the OEP (Odd to Even Predominance) values are between 0.2. and 0.49. However, the content of light hy-drocarbons in the petroleum from the neighboring wells is relatively low and the content of the even numb

关键词： Tarim Basin igneous intrusive abnormally high heat stress bitumen carbon isotope PAH

Carbon isotope composition and its implications of Lower Cretaceous Aptian-Albian shallow water carbonates in the Cuoqin Basin, North Tibet

在线全文

学校读者我要写书评

暂无评论

Science china Earth Sciences 2004年第3期47卷 247-254页

作者： ZHU Jingquan1, LI Yongtie2. JIANG Maosheng1 & CHEN Daizhao1 1. institute of Geology and Geophysics, Chinese Academy of Sciences, beijing 10002.,{2. 2. research institute of petroleum Exploration and Development, CNPC, beijing 100083,{2. Chinese Acad Sci Inst Geol & Geophys Beijing 100029 Peoples R China CNPC Res Inst Petr Explorat & Dev Beijing 100083 Peoples R China

The d 13C values of Lower Cretaceous Aptian-Albian platform-type carbonates in the Cuoqin Basin, North Tibet vary between 2.48 and 5.46. The mean value is 3.93. The values are not only provided with positive excursion, but also 1.17 higher than those of con-temporaneous pelagic carbonates which possess pretty high d 13C values. The origin is ap-proached. During the oceanic anoxic events, a great number of organisms were rapidly buried, causing the increase of the d 13C value of oceanic total dissolved carbon (TDC) and generally promoting the values of marine carbonates. After that, owing to the organisms undergoing dif-ferent isotopic fractionation in the paleo-ocean with stratified structure, d 13C values of shallow sea carbonate were obviously higher than those of pelagic carbonates.

关键词： shallow water carbonate, stable carbon isotope, paleooceanography, Aptian-Albian stage, Cuoqin Basin.

Large pore volume mesoporous aluminum oxide synthesized via nano-assembly

在线全文

学校读者我要写书评

暂无评论

Science china Chemistry 2009年第12期52卷 2114-2124页

作者： WANG DingCong Fushun research institute of {2. and Petrochemicals,china {2. and chemical corporation (SINOPEC),Fushun 113001,china 1. Fushun research institute of {2. and Petrochemicals China Petroleum and Chemical Corporation (SINOPEC) Fushun 113001 China

A new nano-assembly approach has been proposed for the preparation of macropore volume mesoporous aluminum oxide supports. Secondary nano-assembly and a frame structure mechanism for large pore volume mesoporous supports have been proposed. In a primary nano-assembly supersoluble micelle,aluminum hydroxide nanoparticles were precipitated in situ in surfactants with a volume balance (VB) less than 1,followed by secondary nano-assembly in linear and cylindrical shapes. The secondary nano-assembly of cylindrical aluminum hydroxides was calcined to form nano cylindrical aluminum oxides. For the formation of macropore volume mesoporous supports,we utilized a frame structure mechanism of mesoporous support,in which the exterior surface of the carrier may not be continuous. This macropore volume support has been used for the hydrotreatment of a residual oil catalyst,which possesses the following physical characteristics:pore volume 1.8―2.7 mL·g-1,specific surface area 180―42. m2.g-1,average pore diameter 17―57 nm,average pore diameter more than 10 nm (81%―94%),porosity 87%―93%,and crush strength 7.7―2. N·mm-1.

关键词： pore volume mesopore aluminum oxide nano-assembly supersolubility pore size porosity

Micro-mechanisms of residual oil mobilization by viscoelastic fluids

在线全文

学校读者我要写书评

暂无评论

petroleum Science 2008年第1期5卷 56-61页

作者： Zhang Lijuan Yue Xiang＇an Guo Fenqiao Key Laboratory of petroleum Engineering Ministry of Education China University of Petroleum Beijing 102249 China Development Department Sinopec Exploration and Production Research Institute Beijing 100083 China

Four typical types of residual oil, residual oil trapped in dead ends, oil ganglia in pore throats, oil at pore corners and oil film adhered to pore walls, were studied. According to main pore structure characteristics and the fundamental morphological features of residual oil, four displacement models for residual oil were proposed, in which pore-scale flow behavior of viscoelastic fluid was analyzed by a numerical method and micro-mechanisms for mobilization of residual oil were discussed. Calculated results indicate that the viscoelastic effect enhances micro displacement efficiency and increases swept volume. For residual oil trapped in dead ends, the flow field of viscoelastic fluid is developed in dead ends more deeply, resulting in more contact with oil by the displacing fluid, and consequently increasing swept volume. In addition, intense viscoelastic vortex has great stress, under which residual oil becomes small oil ganglia, and finally be carried into main channels. For residual oil at pore throats, its displacement mechanisms are similar to the oil trapped in dead ends. Vortices are developed in the depths of the throats and oil ganglia become smaller. Besides, viscoelastic fluid causes higher pressure drop on oil ganglia, as a driving force, which can overcome capillary force, consequently, flow direction can be changed and the displacing fluid enter smaller throats. For oil at pore corners, viscoelastic fluid can enhance displacement efficiency as a result of greater velocity and stress near the corners. For residual oil adhered to pore wall, viscoelastic fluid can provide a greater displacing force on the interface between viscoelastic fluid and oil, thus, making it easier to exceed the minimum interfacial tension for mobilizing the oil film.

关键词： Viscoelastic chemical flooding displacement mechanism residual oil swept volume

Application of backflush and micro-flow techniques to the analysis of C5—C13 hydrocarbons in crude oils and its geochemical significance

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2007年第11期17卷 1382-1387页

作者： Wang Peirong1,2. Zhao Hong2.3, Xu Guanjun1,4, Zhu Cuishan2.3, Xiao Tingrong4, Zhang Min2.3 and Zhang Bin1,4(1. Key Laboratory of petroleum Geochemistry, china National petroleum corporation, beijing 100083, china 2. Geochemistry Department of Yangtze University, Jingzhou 43402., china 3. Key Laboratory of Exploration Technologies for Oil and Gas Resources, Ministry of Education, Yangtze University, Jingzhou 43402., china 4. petroleum Geology Central Laboratory, research institute of petroleum Exploration and Development, Petro{12., beijing 100083, china) Key Laboratory of petroleum Geochemistry China National Petroleum Corporation Beijing 100083 China Geochemistry Department of Yangtze University Jingzhou 434023 China Key Laboratory of Exploration Technologies for Oil and Gas Resources Ministry of Education Yangtze University Jingzhou 434023 China petroleum Geology Central Laboratory Research Institute of Petroleum Exploration and Development PetroChina Beijing 100083 China

An Agilent 6890N GC equipped with both FID and Agilent 5975 MSD analyzer has been employed to analyze C5—C13 hydrocarbon fractions of crude oils. A technical combination of program temperature volatilizer injection, backflush and micro-flow controller afforded a fine separation of C5—C13 compounds on a PONA column with the heavy part of crude oils being cut off before entering the analytical column. Both GC-FID chromatogram and GC-MS mass chromatograms (MID and full scan) could be obtained at the same time. The retension time differences of nC6—nC13 alkanes between GC and TIC were in the range of 0.02.0.58 minutes. Totally 2.6 peaks have been assigned group compositions. Results on 8 typical oil samples from CNPC Key Laboratory Crude Oil Library showed that the characteristics of C6—C13 hydrocarbon group composition could be used in oil-oil correlation studies.

关键词： GC analysis GC/MS analysis backflush micro-flow controller light fraction in crude oil

THE CHARACTERISTICS OF REMOTE SENSING TECTONICS IN QIANGTANG-CHANGDU MASSIF, QINGHAI-TIBET PLATEAU

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

地学前缘 2000年第S1期7卷 435-437页

作者： Zhao Zhengzhang 1,Ye Hefei 2.Li Yongtie 2.1 china National petroleum {2., beijing 10072.,china 2.research institute of petroleum Exploration and Development, CNPC, beijing 100083,china)

The northern Tibet plateau is the core of generalized Qinghai—Tibet plateau. The main part of Qiangtang—Changdu massif, which is 45×10 4km 2.and more than 5000m in altitude, conforms to the northern Tibet plateau in area.1 The shape features and boundary conditions of Qiangtang—Changdu massif\;(1) Qiangtang—Changdu massif shows huge flat\|lying “S” area In MSS7 mosaic image, Qiangtang—Changdu massif extends in west and east, and appears a long\|elliptic huge block composed of feathered and dendritic textures.. Noticeably, there are two similar texture “tails" in the west and east ends of the massif. The western tail turns and constringes to the north, and eastern tail to the south. Thereby, the massif shows huge “S" area. According to the regional analysis, the eastern tail locates between Shaluli Mt.\|Taniantaweng Mt. and Mujiang River, and western part through Bangong\|Co connects with Pamirs along Karakoram Mt. In regional tectonics, the massif locates between Lazhulong\|Xijinwulan\|Co\|Jinshajiang River and Bangong\|Co\|Dongqiao\|Nujiang River fault belts.

关键词： Qiangtang—Changdu massif remote sensing boundary condition circular structure deformin g features mechanic characteristic dynamics

Review and Comprehensive Analysis of Composition and Origin of High Acidity Crude Oils

在线全文

学校读者我要写书评

暂无评论

china petroleum Processing & Petro{2. Technology 2011年第1期13卷 6-15页

作者： Cai Xinheng Tian Songbai (research institute of {2. Processing,SINOPEC,beijing 100083,china) SINOPEC Res Inst Petr Proc Beijing 100083 Peoples R China

High acidity crude oils have an advantage over normal oils in terms of their price,but can cause corrosion and refinery *** are the so-called opportunity crudes and likely to be important reserved resources in the 2.st *** on high acidity crude oils are becoming more and more *** on the existing research achievements,this article has given an overview of the chemical composition and acid distribution of high acidity oils,and also analyzed their origin types and potential influence factors.

关键词： high acidity oils total acid number acid composition origin influence factors

Alkaline diagenesis and its genetic mechanism in the Triassic coal measure strata in the Western Sichuan Foreland Basin,china

在线全文

学校读者我要写书评

暂无评论

petroleum Science 2009年第4期6卷 354-365页

作者： Jiang Zaixing Qiu Longwei Chen Guiju College of Energy China University of GeosciencesBeijing 100083China College of Earth Resources and Information China University of PetroleumShandong 257062China Sinopec Exploration and production research {2. Beijing 100083China

The reservoir of the upper Triassic Xujiahe Formation (T3x) in the Western Sichuan Foreland Basin is a set of terrigenous clastic rocks in an environment of coal measure sediments. Diagenesis greatly controls the physical properties of the reservoir through different responses of minerals to acidic and alkaline diagenetic environment. The dissolution of unstable components such as feldspar, rock fragments, carbonate cement, and clay minerals is the major source of secondary pores under acidic diagenesis, while the dissolution of quartz increases the reservoir space in the fault-fold zone of Longmen Mountain and Leikoupo paleo-hills. The dissolution of quartz is a result of cross-formation flow of fluid in the Himalaya epoch and the invasion of alkaline formation water from the Triassic Leikoupo and Jialingjiang formations through fault and fracture systems. In the vertical succession, acidic dissolution occurs at a shallow depth of less than 2.180 m, and alkaline dissolution occurs at a greater depth of more than 2.2.0 m. The reservoir space is formed by the influence of both acidic and alkaline dissolution in the depth interval of 2.180–2.2.0 m.

关键词： Sichuan Basin upper Triassic alkaline diagenesis porosity genetic mechanism