Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy tungsten inert gas(TIG)welded joint were analyzed in *** weld zone(WZ),α+θeutectic structure formed ...
详细信息
Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy tungsten inert gas(TIG)welded joint were analyzed in *** weld zone(WZ),α+θeutectic structure formed at grain boundaries with no precipitates inside the *** partially melted zone(PMZ),symbiotic eutectic or divorced eutectic formed at grain boundaries and needle-likeθ′phases appeared in the secondary heated *** over aged zone(OAZ),the coarsening and dissolution ofθ′phases occurred and mostθ′phases transformed intoθ*** general heat affected zone(HAZ),θ′phases *** such as the strengthening phases,the grain size,the Cu content in matrix and the dislocation density can affect the mechanical properties in different regions of the ***,a model describing the relationship between mechanical properties of the material and the volume fraction of precipitates,the average diameter of precipitates and the concentration of soluble elements was proposed.
Numerical simulation and experimental methods were used to investigate the effects of weld penetration on tensile properties of 2219 aluminum alloy tungsten inert gas(TIG)welded *** results show that when other geomet...
详细信息
Numerical simulation and experimental methods were used to investigate the effects of weld penetration on tensile properties of 2219 aluminum alloy tungsten inert gas(TIG)welded *** results show that when other geometric parameters are consistent,within a certain range,the deeper the weld penetration of the capping weld is,the lower the tensile strength of the j oint *** deeper weld penetration of the capping weld can cause the more concentrated stress at the weld toe and the joint is more likely to crack *** on necessary assumptions,a model for analyzing the mathematical relation between the weld penetration of the capping weld and the tensile strength of the joint was proposed to validate the experimental results. The decrease of weld penetration of capping weld can be controlled by decreasing welding current,helium content or increasing welding voltage.
暂无评论