检索结果-南通市图书馆

High Voltage 2024年第1期9卷 2-21页

作者： Yanan Wang Linyuan Ren Zihao Yang Saikang Shen Zichen Deng Qi Yuan Weidong ding Zhenjie ding School of Electrical Engineering Xi'an Jiaotong UniversityXi'anChina School of Electronic and Information Engineering Xi'an Jiaotong UniversityXi'anChina

Solid-state high voltage high repetitive pulse generators have a broad prospect in various *** high power and high-frequency operation of the pulse generator suffer from the massive heat dissipation problem,which limits the improvement of the output parameters and even affects the *** article focuses on heat management technology for high voltage high repetitive pulse ***,the typical circuit topology of the high repetitive pulse generators was *** the perspective of different application requirements,the demands of the heat management design were ***,the heat generation characteristics and difficulties of solid-state high voltage high repetitive pulse generators were ***,the different stateof-art cooling techniques were reviewed,and their applicability and limitations for the high voltage high repetitive generators were ***,a flow chart for heat management design was given.

关键词： pulse state high

Improving Transferable Targeted Adversarial Attack for Object Detection Using RCEN Framework and Logit Loss Optimization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第9期80卷 4387-4412页

作者： Zhiyi ding Lei Sun Xiuqing Mao Leyu Dai Ruiyang ding School of Cryptography Engineering Information Engineering UniversityZhengzhou450000China

Object detection finds wide application in various sectors,including autonomous driving,industry,and *** studies have highlighted the vulnerability of object detection models built using deep neural networks when confronted with carefully crafted adversarial *** not only reveals their shortcomings in defending against malicious attacks but also raises widespread concerns about the security of existing *** existing adversarial attack strategies focus primarily on image classification problems,failing to fully exploit the unique characteristics of object detectionmodels,thus resulting in widespread deficiencies in their ***,previous research has predominantly concentrated on the transferability issues of non-targeted attacks,whereas enhancing the transferability of targeted adversarial examples presents even greater *** attack techniques typically employ cross-entropy as a loss measure,iteratively adjusting adversarial examples to match target ***,their inherent limitations restrict their broad applicability and transferability across different *** address the aforementioned challenges,this study proposes a novel targeted adversarial attack method aimed at enhancing the transferability of adversarial samples across object detection *** the framework of iterative attacks,we devise a new objective function designed to mitigate consistency issues arising from cumulative noise and to enhance the separation between target and non-target categories(logit margin).Secondly,a data augmentation framework incorporating random erasing and color transformations is introduced into targeted adversarial *** enhances the diversity of gradients,preventing overfitting to white-box ***,perturbations are applied only within the specified object’s bounding box to reduce the perturbation range,enhancing attack *** were conducted on the Microsoft

关键词： Object detection model security targeted attack gradient diversity

A viscoelastic metamaterial beam for integrated vibration isolation and energy harvesting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第7期45卷 1243-1260页

作者： Long ZHAO Zeqi LU Hu ding Liqun CHEN Shanghai Institute of Applied Mathematics and Mechanics Shanghai Key Laboratory of Mechanics in Energy EngineeringShanghai Frontier Science Center of MechanoinformaticsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai200072China School of Microelectronics Shanghai UniversityShanghai201800China

Locally resonant metamaterials have low-frequency band gaps and the capability of converging vibratory energy in the band gaps at resonant *** has been demonstrated by several researchers that the dissipatioin of vibratory energy within the band gap can be improved by using viscoelastic *** paper designs an integrated viscoelastic metamaterial for energy harvesting and vibration *** viscoelastic metamaterial is achieved by a viscoelastic beam periodically arrayed with spatial ball-pendulum nonlinear energy *** nonlinear resonator with an energy harvesting function is achieved by placing a free-rolling magnetic ball in a spherical cavity with an additional induction *** dynamic equations of viscoelastic metamaterials under transverse excitation are established,and the energy harvesting and vibration isolation characteristics within the dispersion relation of viscoelastic metamaterials are *** results show that the vibrations of the main body of the viscoelastic metamaterial beam are significantly suppressed in the frequency range of the local resonance band *** the same time,the elastic waves are limited in the nonlinear resonator with an energy harvesting function,which improves the energy ***,an experimental platform of viscoelastic metamaterial vibration is established for validation purposes.

关键词： viscoelastic metamaterial nonlinear vibration vibration isolation energy harvesting

Effect of hot isostatic pressure on the microstructure and tensile properties of γ'-strengthened superalloy fabricated through induction-assisted directed energy deposition

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1089-1097页

作者： Jianjun Xu Hanlin ding Xin Lin Feng Liu Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China

The microstructure characteristics and strengthening mechanism of Inconel738LC(IN-738LC) alloy prepared by using induction-assisted directed energy deposition(IDED) were elucidated through the investigation of samples subjected to IDED under 1050℃ preheating with and without hot isostatic pressing(HIP,1190℃,105 MPa,and 3 h).Results show that the as-deposited sample mainly consisted of epitaxial columnar crystals and inhomogeneously distributed γ’ phases in interdendritic and dendritic core *** HIP,grain morphology changed negligibly,whereas the size of the γ’ phase became increasingly *** further heat treatment(HT,1070℃,2 h + 845℃,24 h),the γ’ phase in the as-deposited and HIPed samples presented a bimodal size distribution,whereas that in the as-deposited sample showed a size that remained *** comparison of tensile properties revealed that the tensile strength and uniform elongation of the HIP + HTed sample increased by 5% and 46%,respectively,due to the synergistic deformation of bimodal γ’phases,especially large cubic γ’ ***,the relationship between phase transformations and plastic deformations in the IDEDed sample was discussed on the basis of generalized stability theory in terms of the trade-off between thermodynamics and kinetics.

关键词： directed energy deposition Ni-based superalloys high-temperature preheating hot isostatic pressing microstructure tensile properties

Effective removal of Sb(V)from aqueous solutions by micro-electrolysis with composite scrap iron-manganese as filler

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第6期25卷 516-524页

作者： Shangkun ding Saihua HUANG Yiping ZHANG Yongchao ZHOU Institute of Municipal Engineering Zhejiang UniversityHangzhou310058China Zhejiang University of Water Resources and Electric Power Hangzhou310018China

Micro-electrolysis(ME)technology is investigated for improving the efficiency of removal of pentavalent antimony(Sb(V))from the *** this study,an ME system composed of scrap iron filings,waste manganese fillings,and activated carbon(Fe-Mn-C ME)was used to efficiently remove Sb(V).The results proved that,compared with conventional iron-carbon micro-electrolysis(Fe-C ME),Fe-Mn-C ME significantly enhances the removal rate of Sb(V)when the hydraulic retention time is 10–24 *** Fe-Mn flocs produced by this system were analyzed using X-ray diffraction(XRD),energy-dispersive X-ray spectroscopy(EDS),X-ray photoelectron spectroscopy(XPS),and Brunauer-Emmett-Teller(BET)surface area analysis,which revealed that the flocs were mostly Mn-substituted FeOOH and had a relatively larger specific surface area,providing better adsorption ***,it was found that the removal rate of Sb(V)decreased as the iron-carbon mass ratio increased,while it first increased and then decreased as the manganese content *** reduction of Fe(III)was accelerated with an increase in the addition of manganese,leading to an increase in the concentration of Fe(II).The electron transfer and the formation of Fe(II)were facilitated by the potential difference between manganese and carbon,as well as by the formation of microcells between iron and manganese,which improved the reduction ability of Sb(V).From our thorough investigation and research,this is the first report that has proposed Fe-Mn-C ME for removing *** provides a novel approach and technological support for removing Sb(V)efficiently.

关键词： Antimony Iron Manganese Micro-electrolysis(ME) Electrochemistry Mechanism

A multiscale differential-algebraic neural network-based method for learning dynamical systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Mechanical System Dynamics 2024年第1期4卷 77-87页

作者： Yin Huang Jieyu ding College of Computer Science&Technology Qingdao UniversityQingdaoChina School of Mathematics and Statistics Qingdao UniversityQingdaoChina Center for Computational Mechanics and Engineering Simulation Qingdao UniversityQingdaoChina

The objective of dynamical system learning tasks is to forecast the future behavior of a system by leveraging observed ***,such systems can sometimes exhibit rigidity due to significant variations in component parameters or the presence of slow and fast variables,leading to challenges in *** overcome this limitation,we propose a multiscale differential-algebraic neural network(MDANN)method that utilizes Lagrangian mechanics and incorporates multiscale information for dynamical system *** MDANN method consists of two main components:the Lagrangian mechanics module and the multiscale *** Lagrangian mechanics module embeds the system in Cartesian coordinates,adopts a differential-algebraic equation format,and uses Lagrange multipliers to impose constraints explicitly,simplifying the learning *** multiscale module converts high-frequency components into low-frequency components using radial scaling to learn subprocesses with large differences in *** results demonstrate that the proposed MDANN method effectively improves the learning of dynamical systems under rigid conditions.

关键词： dynamical systems learning multibody system dynamics differential-algebraic equation neural networks multiscale structures

Analytical Expression for the Atomic Friction of a Single Asperity Based on the Prandtl-Tomlinson Model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第3期37卷 416-422页

作者： Weike Yuan Yue ding Gangfeng Wang Xinrui Niu Department of Engineering Mechanics SVLMMLXi’an Jiaotong UniversityXi’an710049China Department of Mechanical Engineering City University of Hong KongHong Kong SAR999077China

The Prandtl-Tomlinson(PT)model has been widely applied to interpret the atomic friction mechanism of a single *** this study,we present an approximate explicit expression for the friction force in the one-dimensional PT model under quasi-static ***‘stick-slip’friction curves are first approximated properly by sawtooth-like lines,where the critical points before and after the‘slip’motion are described analytically in terms of a dimensionless parameterη.Following this,the average friction force is expressed in a closed form that remains continuous and valid forη>***,an analytical expression for the load dependence of atomic friction of a single asperity is derived by connecting the parameterηwith the normal *** the parameters reported in experiments,our prediction shows good agreement with relevant experimental results.

关键词： Atomic friction Stick-slip friction Prandtl-Tomlinson model Friction force microscope

Synthesis methods and powder quality of titanium monocarbide

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第8期72卷 10-18页

作者： Maoqiao Xiang Wenjun ding Qinghua Dong Qingshan Zhu State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of Chemical Engineering University of the Chinese Academy of SciencesBeijing 100049China Innovation Academy for Green Manufacture Chinese Academy of SciencesBeijing 100190China

Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent *** of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its ***,the methods for synthesizing TiC powders based on a reaction system are *** analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of ***,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer ***,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.

关键词： Titanium carbide Synthesis methods Reaction engineering Reaction kinetics Powder technology

Preparation of calcium carbonate with microstructure and nanostructure from carbide slag for CO_(2) sequestration by using recyclable ammonium chloride

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 1-9页

作者： Jin Yao Qiuju Chen Li Zeng Wenjin ding Key Laboratory of Ministry of Education for Solid Waste Treatment and Resource Recycle Southwest University of Science and TechnologyMianyang621010China Sichuan Engineering Lab of Non-metallic Mineral Powder Modification and High-value Utilization Mianyang621010China School of Architecture and Civil Engineering Chengdu UniversityChengdu610106China

Based on the composition characteristics of carbide slag and the application of polyvinyl chloride,a method of preparing calcium carbonate with microstructure and nanostructure by using carbide slag as a raw material and ammonium chloride as a leaching agent was *** factors for the preparation of calcium carbonate and the effects of different conditions on the crystal phase,grain size,and morphology of calcium carbonate were systematically *** results showed that the nanosized calcium carbonate was prepared at 60 mL/min,25°C,no additional ammonia,and 60 *** product of spherical vaterite was in accordance with the relevant standards for the industrial precipitation of calcium ***,the reuse of carbonation filtrate was *** crystal phase,grain size,and morphology of the carbonation product could be controlled by adjusting the reaction *** manuscript provided a new idea for resource utilization of carbide slag and preparing nanocalcium carbonate.

关键词： Carbide slag Ammonium chloride Cyclic utilization Micro and nano structure Product control

Parametric resonance of axially functionally graded pipes conveying pulsating fluid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第2期45卷 239-260页

作者： Jie JING Xiaoye MAO Hu ding Liqun CHEN Shanghai Key Laboratory of Mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China Shanghai Institute of Aircraft Mechanics and Control Shanghai 200092China

Based on the generalized Hamilton's principle,the nonlinear governing equation of an axially functionally graded(AFG)pipe is *** non-trivial equilibrium configuration is superposed by the modal functions of a simply supported *** the direct multi-scale method,the response and stability boundary to the pulsating fluid velocity are solved analytically and verified by the differential quadrature element method(DQEM).The influence of Young's modulus gradient on the parametric resonance is investigated in the subcritical and supercritical *** general,the pipe in the supercritical region is more sensitive to the pulsating *** nonlinearity changes from hard to soft,and the non-trivial equilibrium configuration introduces more frequency components to the ***,the increasing Young's modulus gradient improves the critical pulsating flow velocity of the parametric resonance,and further enhances the stability of the *** addition,when the temperature increases along the axial direction,reducing the gradient parameter can enhance the response *** work further complements the theoretical analysis of pipes conveying pulsating fluid.

关键词： pipe conveying fluid axially functionally graded supercritical resonance multi-scale method parametric resonance