Modeling and Simulation for the Hydrocracking Reactor

作     者：Li Qunyong 1,Jiang Qingyin 1,Cao Zhikai 1,Ai Lijiang 2,Zhang Yuqin 2 1.Department of Chemical and Biochemical Engineering,College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005,P.R.China 2.PetroChina Kelamayi Petrochemical Company(KPC),Kelamayi Xinjiang 834003,P.R.China 

会议名称：《第二十七届中国控制会议》

会议日期：2008年

学科分类：081705[工学-工业催化] 08[工学] 0817[工学-化学工程与技术] 080401[工学-精密仪器及机械] 0804[工学-仪器科学与技术] 080402[工学-测试计量技术及仪器] 

关 键 词：Hydrocracking Reactor Model Simulation 

摘      要：A simplified six-lump-model for one practical residue hydrocracking reactor has been developed according to the characteristics of hydrocracking *** model,including six lumps（crude oil,diesel oil,aviation kerosene,heavy naphtha,light naphtha and gas） ,took both mass balance and kinetics equations into *** fifteen kinetic pa-rameters of the model need to be estimated,which was half less than that of literature [1],and the parameters were estimated with the measured industrial data shown in literature [1] by Nelder-Mead minimization *** distribution of the hy-drocracking product yields along the reactor position and the reaction time can be predicted by solving this simplified *** calculated result was compared with the measured industrial value and all the relative deviations were within 5%which was close to the literature [1] .