Erosion Behavior of AISI 6061-T6

作     者：Juan Rodrigo Laguna-Camacho Hermilo Martínez-García Frumencio Escamilla-Rodríguez Carlos Alarcón-Rosas Celia María Calderón-Ramón Lizeth Ríos-Velasco Lizeth Ríos-Velasco Matilde Pelcastre-Lozano álvaro Casados-Sánchez Melesio González-Gómez 

作者机构：Faculty of Electrical and Mechanical Engineering Universidad Veracruzana Veracruz Mexico Facultad de Ciencias Químicas Universidad Veracruzana Poza Rica de Hidalgo Veracruz Mexico 

出 版 物：《Journal of Surface Engineered Materials and Advanced Technology》 (表面工程材料与先进技术期刊（英文）)

年 卷 期：2015年第5卷第3期

页      面：136-146页

学科分类：1002[医学-临床医学] 100214[医学-肿瘤学] 10[医学] 

主　　题：Erosion AISI 6061-T6 Aluminium Oxide Wear Mechanisms 

摘      要：In this work, erosion tests were performed to study the behavior of an aluminium alloy known as AISI 6061-T6 against the impact action of aluminium oxide abrasive particles. This material was selected because of its high ductility and tenacity. An erosion rig based on that in ASTM G76-95 was used to conduct the tests. The alumina particles had a particle size between 300 and 400 μm. Four incident angles, 30°, 45°, 60° and 90° were used to conduct the erosion tests. The particle velocity and the abrasive flow rate were 24 ± 2 m/s and 63 ± 0.5 g/min. The room temperature was between 35°C and 40°C. Chemical analysis of the material and abrasive particles were obtained using energy dispersive X-ray analysis (EDS). SEM images were employed to identify the wear mechanisms, which were characterized by high plastic deformation. The erosion rates were obtained and the results indicated that the maximum erosion damage was achieved at 30° reducing progressively at normal incidence.