咨询与建议

看过本文的还看了

相关文献

该作者的其他文献

文献详情 >Effects of Solid Solution Trea... 收藏

Effects of Solid Solution Treating on the Microstructureand Damping Behaviour of MnCuNiFe Alloys

Effects of Solid Solution Treating on the Microstructureand Damping Behaviour of MnCuNiFe Alloys

作     者:Yin, Fuxing Ohsawa, Y. Sato, A. Kawahara, K. 

作者机构:National Research Institute for Metals Tsukuba Ibaraki 305-0047 Japan B.B.Materia Co. Ltd. Chiba-Shi Chiba 267-0066 Japan 

出 版 物:《Journal of Materials Science & Technology》 (材料科学技术(英文版))

年 卷 期:1998年第14卷第4期

页      面:299-307页

核心收录:

学科分类:081704[工学-应用化学] 07[理学] 0817[工学-化学工程与技术] 0806[工学-冶金工程] 08[工学] 0805[工学-材料科学与工程(可授工学、理学学位)] 0703[理学-化学] 0802[工学-机械工程] 070301[理学-无机化学] 0801[工学-力学(可授工学、理学学位)] 0702[理学-物理学] 

主  题:Manganese alloys 

摘      要:A high damping condition is easily obtained in Mn-(16-24) Cu-(4-6) Ni-2Fe (at. pct) alloys, when cooling rate is controlled after the solid solution treatment at 1173 K. It was observed that the temperature dependent changes of logarithmic decrement in 10 h cooled samples are sensitive to the alloy composition. As compared with water quenching treatment, controlled 10 h cooling improves T//N temperature of the alloys extensively by producing a Mn-enriched matrix portion in the alloys. Calculations suggest that the relative decreases of Cu and Ni content in the matrix portion be dominated by the Ni content in the original alloys, and therefore, the volume fraction of the Cu, Ni-enriched precipitates is estimated to be about 20% and 10% in the 4Ni and 6Ni alloys, respectively. As a result, the T//N temperature for each alloy, corresponding to the rising temperature of logarithmic decrement, has been related to the Cu, and Ni in the Mn-enriched matrix. The existence of left brace 110 right brace twinning boundaries is confirmed in the microstructure of both 4Ni and 6Ni alloys. However, the relative lattice strains, which the twinning boundaries act to accommodate, were found largely different in the two alloys. It is considered that boundaries with smaller orientation deviation can coordinate the external stresses easily by cyclic moving, and therefore, the broader damping peak which occurs in the 10 h cooled 6Ni alloy becomes feasible. Electron diffraction results also indicate possible formation of many sub-crystals in the matrix phase, which are relatively rotated on some invariant planes. Those sub-crystal boundaries might play some attenuation roles in the temperature range between T//N and room temperature. (Edited author abstract) 9 Refs.

读者评论 与其他读者分享你的观点

用户名:未登录
我的评分