Sizing of a Filter (<i>L-C</i>) for a 180°Control Inverter Connected to a Medium Voltage Network
Sizing of a Filter (<i>L-C</i>) for a 180°Control Inverter Connected to a Medium Voltage Network作者机构:Institut National Polytechnique Félix Houphouë t Boigny (INP-HB) Yamoussoukro Cô te d’Ivoire Université Félix Houphouë t Boigny (UFHB) Abidjan Cô te d’Ivoire Ecole Supérieure Africaine des Technologies d’Information et de la Communication (ESATIC) Abidjan Cô te d’Ivoire
出 版 物:《Open Journal of Applied Sciences》 (应用科学(英文))
年 卷 期:2021年第11卷第5期
页 面:565-576页
学科分类:080902[工学-电路与系统] 0809[工学-电子科学与技术(可授工学、理学学位)] 08[工学]
主 题:filter (L-C) THD inverter with 180° control and with SPWM control mathematical iterations MV. MATLAB-SIMULINK
摘 要:This paper studies the design and sizing of a filter (L-C) for an inverter with 180° control in Medium voltage (MV), based on formulas of the capacitance of the capacitor C and the inductance L of the filter (L-C) of an SPWM inverter. These formulas were obtained by minimizing two parameters: the reactive power of the capacitor (capped at 5% of the apparent power of the load) and the ripple of the current flowing through inductance L (capped at 10% of the current supplying the load). The application of these formulas for the calculation of the filter (L-C) of the 180° control inverter in MV is not conclusive. Studies have been carried out to make them applicable. The results show that limiting the current ripple in the inductor to 10% of the load current is a valid assumption and that limiting the reactive power of the capacitor to 5% of the apparent power of the load presents shortcomings. The results also show that setting the inductance L of the filter to Lmaxi and the capacitor C from 35 × Cmaxi to 400 × Cmaxi gives voltage and current THDs that meet the 519 IEEE-2014 standards.